e3
DS21206 Rev. 9 - 2 1 of 3 KBJ4005G-KBJ410G
www.diodes.com ãDiodes Incorporated
KBJ4005G - KBJ410G
4.0A GLASS PASSIVATED BRIDGE RECTIFIER
·Case: KBJ
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish - Tin. Plated Leads, Solderable per
MIL-STD-202, Method 208
·Polarity: Molded on Body
·Mounting: Through Hole for #6 Screw
·Mounting Torque: 5.0 in-lbs Maximum
·Ordering Information: See Last Page
·Marking: Type Number
·Weight: 4.6 grams (approximate)
Mechanical Data
·Glass Passivated Die Construction
·High Case Dielectric Strength of 1500VRMS
·Low Reverse Leakage Current
·Surge Overload Rating to 120A Peak
·Ideal for Printed Circuit Board Applications
·UL Listed Under Recognized Component Index, File
Number E94661
·Lead Free Finish, RoHS Compliant (Note 4)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified
_
A
B
D
J
K
C
E
G
H
L
M
N
P
R
KBJ
Dim Min Max
A24.80 25.20
B14.70 15.30
C4.00 Nominal
D17.20 17.80
E0.90 1.10
G7.30 7.70
H3.10 Æ3.40 Æ
J3.30 3.70
K1.50 1.90
L9.30 9.70
M2.50 2.90
N3.40 3.80
P4.40 4.80
R0.60 0.80
All Dimensions in mm
Characteristic Symbol KBJ
4005G
KBJ
401G
KBJ
402G
KBJ
404G
KBJ
406G
KBJ
408G
KBJ
410G Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @ TC= 115°C IO4.0 A
Non-Repetitive Peak Forward Surge Current, 8.3 ms single
half-sine-wave superimposed on rated load IFSM 120 A
Forward Voltage per element @ IF= 2.0A VFM 1.0 V
Peak Reverse Current @ TC= 25°C
at Rated DC Blocking Voltage @ TC= 125°C IRM 5.0
500 µA
I2t Rating for Fusing, t <8.3ms (Note 3) I2t60A
2s
Typical Total Capacitance per Element (Note 1) CT40 pF
Typical Thermal Resistance (Note 2) RqJC 5.5 °C/W
Operating and Storage Temperature Range Tj,T
STG -65 to +150 °C
Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
2. Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink.
3. Non-repetitive, for t >1ms and <8.3ms.
4. RoHs revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7.
Features
DS21206 Rev. 9 - 2 2 of 3 KBJ4005G-KBJ410G
www.diodes.com
0.01
0.1
1.0
10
0 0.4 0.8 1.2 1.6 1.8
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
.2 T
y
pical Forward Characteristics
F
I , INSTANTANEOUS FORWARD CURRENT (A)
F
T = 150°C
J
T=25°C
J
Pulse width = 300µs
0
40
80
120
160
180
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fi
g
. 3 Max Non-Repetitive Sur
g
e Current
T = 150°C
j
Single half-sine-wave
10
100
1000
0.1 1.0 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fi
g
.4 T
y
pical Total Capacitance, Per Element
R
f = 1MHz
T=25°C
j
0.1
1.0
10
100
1000
02040 6080
100 120 140
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fi
g
.5 T
y
pical Reverse Characteristics
T = 150°C
J
T = 125°C
J
T = 100°C
J
T=25°C
J
0
1
2
3
4
5
6
25 50 75 100 125 150
I , AVERAGE RECTIFIED CURRENT (A)
O
T , CASE TEMPERATURE (°C)
Fi
g
. 1 Forward Current Deratin
g
Curve
C
Resistive or
Inductive load
Notes: 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf
DS21206 Rev. 9 - 2 3 of 3 KBJ4005G-KBJ410G
www.diodes.com
Ordering Information
Device Packaging Shipping
KBJ4005G KBJ 20/Tube
KBJ401G KBJ 20/Tube
KBJ402G KBJ 20/Tube
KBJ404G KBJ 20/Tube
KBJ406G KBJ 20/Tube
KBJ408G KBJ 20/Tube
KBJ410G KBJ 20/Tube
Ordering Information (Note 5)
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
