Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised April 2001 74LCX16543 Low Voltage 16-Bit Registered Transceiver with 5V Tolerant Inputs and Outputs General Description Features The LCX16543 contains sixteen non-inverting transceivers containing two sets of D-type registers for temporary storage of data flowing in either direction. Each byte has separate control inputs which can be shorted together for full 16-bit operation. Separate Latch Enable and Output Enable inputs are provided for each register to permit independent input and output control in either direction of data flow. 5V tolerant inputs and outputs The LCX16543 is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The LCX16543 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. 2.3V-3.6V VCC specifications provided 5.2 ns tPD max (VCC = 3.3V), 20 A ICC max Power down high impedance inputs and outputs Supports live insertion/withdrawal (Note 1) 24 mA Output Drive (VCC = 3.0V) Implements patented noise/EMI reduction circuitry Latch-up performance exceeds 500 mA ESD performance: Human Body Model > 2000V Machine Model > 200V Note 1: To ensure the high-impedance state during power up or down, OE should be tied to VCC through a pull-up resistor: the minimum value or the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Number 74LCX16543MEA MS56A 56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300 Wide Package Description 74LCX16543MTD MTD56 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Connection Diagram (c) 2001 Fairchild Semiconductor Corporation Logic Symbol DS012464 www.fairchildsemi.com 74LCX16543 Low Voltage 16-Bit Registered Transceiver with 5V Tolerant Inputs and Outputs May 1995 74LCX16543 Pin Descriptions Pin Names Description OEABn A-to-B Output Enable Input (Active LOW) OEBAn B-to-A Output Enable Input (Active LOW) CEABn A-to-B Enable Input (Active LOW) CEBAn B-to-A Enable Input (Active LOW) LEABn A-to-B Latch Enable Input (Active LOW) LEBAn B-to-A Latch Enable Input (Active LOW) A0-A15 A-to-B Data Inputs or B-to-A 3-STATE Outputs B0-B15 B-to-A Data Inputs or A-to-B 3-STATE Outputs Data I/O Control Table Inputs CEABn LEABn Latch Status Output Buffers (Byte n) (Byte n) OEABn H X X Latched High Z X H X Latched -- L L X Transparent -- X X H -- High Z L X L -- Driving H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial A-to-B data flow shown; B-to-A flow control is the same, except using CEBAn, LEBAn and OEBAn Functional Description The LCX16543 contains sixteen non-inverting transceivers with 3-STATE outputs. The device is byte controlled with each byte functioning identically, but independent of the other. The control pins may be shorted together to obtain full 16-bit operation. The following description applies to each byte. For data flow from A to B, for example, the A-to-B Enable (CEABn) input must be LOW in order to enter data from A0-A15 or take data from B0-B15, as indicated in the Data I/O Control Table. With CEABn LOW, a LOW signal on the A-to-B Latch Enable (LEABn) input www.fairchildsemi.com makes the A-to-B latches transparent; a subsequent LOWto-HIGH transition of the LEABn signal puts the A latches in the storage mode and their outputs no longer change with the A inputs. With CEABn and OEABn both LOW, the 3-STATE B output buffers are active and reflect the data present at the output of the A latches. Control of data flow from B to A is similar, but using the CEBAn, LEBAn and OEBAn inputs. 2 74LCX16543 Logic Diagrams Byte 1 (0:7) Byte 2 (8:15) Please note that these diagrams are provided only for the understanding of logic operations and should not be used to estimate propagation delays. 3 www.fairchildsemi.com 74LCX16543 Absolute Maximum Ratings(Note 2) Symbol Parameter Value VCC Supply Voltage -0.5 to +7.0 VI DC Input Voltage -0.5 to +7.0 VO DC Output Voltage -0.5 to +7.0 Conditions Units V V Output in 3-STATE -0.5 to VCC + 0.5 Output in HIGH or LOW State (Note 3) IIK DC Input Diode Current -50 VI < GND IOK DC Output Diode Current -50 VO < GND +50 VO > VCC V mA mA IO DC Output Source/Sink Current 50 mA ICC DC Supply Current per Supply Pin 100 mA IGND DC Ground Current per Ground Pin 100 mA TSTG Storage Temperature -65 to +150 C Recommended Operating Conditions (Note 4) Symbol VCC Parameter Supply Voltage VI Input Voltage VO Output Voltage IOH/IOL Output Current TA Free-Air Operating Temperature t/V Input Edge Rate, VIN = 0.8V-2.0V, VCC = 3.0V Min Max Operating 2.0 3.6 Data Retention 1.5 3.6 0 5.5 HIGH or LOW State 0 VCC 3-STATE 0 5.5 VCC = 3.0V - 3.6V 24 VCC = 2.7V - 3.0V 12 VCC = 2.3V - 2.7V 8 Units V V V mA -40 85 C 0 10 ns/V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Unused (inputs or I/Os) must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = -100 A VCC TA = -40C to +85C (V) Min 2.3 - 2.7 1.7 2.7 - 3.6 2.0 Max V 2.3 - 2.7 0.7 2.7 - 3.6 0.8 2.3 - 3.6 Units V VCC - 0.2 IOH = -8 mA 2.3 1.8 IOH = -12 mA 2.7 2.2 IOH = -18 mA 3.0 2.4 IOH = -24 mA 3.0 2.2 IOL = 100 A 2.3 - 3.6 0.2 IOL = 8 mA 2.3 0.6 IOL = 12 mA 2.7 0.4 IOL = 16 mA 3.0 0.4 V V IOL = 24 mA 3.0 0.55 II Input Leakage Current 0 VI 5.5V 2.3 - 3.6 5.0 A IOZ 3-STATE I/O Leakage 0 VO 5.5V 2.3 - 3.6 5.0 A 0 10 A VI = VIH or VIL IOFF Power-Off Leakage Current www.fairchildsemi.com VI or VO = 5.5V 4 Symbol (Continued) Parameter VCC Conditions (V) ICC ICC Quiescent Supply Current Increase in ICC per Input TA = -40C to +85C Min Units Max VI = V CC or GND 2.3 - 3.6 20 3.6V VI, VO 5.5V (Note 5) 2.3 - 3.6 20 VIH = VCC -0.6V 2.3 - 3.6 500 A A Note 5: Outputs in disabled or 3-STATE only. AC Electrical Characteristics TA = -40C to +85C, RL = 500 Symbol Parameter VCC = 3.3V 0.3V VCC = 2.7V VCC = 2.5V 0.2V CL = 50 pF CL = 50 pF CL = 30 pF Min Max Min Max Min Max tPHL Propagation Delay 1.5 5.2 1.5 6.0 1.5 6.2 tPLH An to Bn or Bn to An 1.5 5.2 1.5 6.0 1.5 6.2 tPHL Propagation Delay 1.5 6.5 1.5 7.5 1.5 7.8 tPLH LEBAn to An or LEABn to Bn 1.5 6.5 1.5 7.5 1.5 7.8 tPZL Output Enable Time OEBAn or OEABn to An or Bn 1.5 6.5 1.5 7.0 1.5 8.5 CEBAn or CEABn to An or Bn 1.5 6.5 1.5 7.0 1.5 8.5 tPZH tPLZ tPHZ tS ns ns ns Output Disable Time OEBAn or OEABn to An or Bn 1.5 6.5 1.5 7.0 1.5 7.8 CEBAn or CEABn to An or Bn 1.5 6.5 1.5 7.0 1.5 7.8 Setup Time, HIGH or LOW, 2.5 2.5 3.0 1.5 1.5 2.0 3.0 3.5 Hold Time, HIGH or LOW, ns Data to LEXXn tW Pulse Width, Latch Enable, LOW tOSHL Output to Output Skew (Note 6) 3.0 ns 1.0 tOSLH ns ns Data to LEXXn tH Units ns 1.0 Note 6: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. Dynamic Switching Characteristics Symbol VOLP VOLV VCC TA = 25C (V) Typical CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.6 CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 -0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 -0.6 Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Conditions Units V V Capacitance Typical Units CIN Symbol Input Capacitance Parameter VCC = Open, VI = 0V or VCC Conditions 7 pF CI/O Input/Output Capacitance VCC = 3.3V, VI = 0V or VCC 8 pF CPD Power Dissipation Capacitance VCC = 3.3V, VI = 0V or VCC, f = 10 MHz 20 pF 5 www.fairchildsemi.com 74LCX16543 DC Electrical Characteristics 74LCX16543 AC LOADING and WAVEFORMS Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 0.3V VCC x 2 at VCC = 2.5 0.2V tPZH,tPHZ GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic trise and tfall 3-STATE Output Low Enable and Disable Times for Logic FIGURE 2. Waveforms (Input Characteristics; f =1MHz, tr = tf = 3ns) Symbol www.fairchildsemi.com VCC 3.3V 0.3V 2.7V 2.5V 0.2V Vmi 1.5V 1.5V VCC/2 Vmo 1.5V 1.5V VCC/2 Vx VOL + 0.3V VOL + 0.3V VOL + 0.15V Vy VOH - 0.3V VOH - 0.3V VOH - 0.15V 6 74LCX16543 Schematic Diagram Generic for LCX Family 7 www.fairchildsemi.com 74LCX16543 Physical Dimensions inches (millimeters) unless otherwise noted 56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300 Wide Package Number MS56A www.fairchildsemi.com 8 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD56 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com 74LCX16543 Low Voltage 16-Bit Registered Transceiver with 5V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com