TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
RF01004 Rev C, November 2010 High Reliability Product Group Page 1 of 4
DEVICES MPLAD15KP7.0A thru MPLAD15KP200CA, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Low profile surface mount
Optional up screening available by replacing the M prefix with MA, MX or MXL. These prefixes specify
various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote
129 for more details on the screening options
Suppresses transients up to 15,000 W @ 10/1000 µs (see Figure 1)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current ID
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance:
o Class 1,2,3,4,5: MPLAD15KP7.0A to 200CA
Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance:
o Class 1,2,3,4: MPLAD15KP7.0A to 200CA
Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance:
o Class 2,3: MPLAD15KP7.0A to 200CA
o Class 4: MPLAD15KP5.0 to 54CA
Pin injection protection per RTCA/DO-160D for Waveform 4 (6.4/69 µs):
o Level 4: MPLAD15KP7.0A to 200CA
o Level 5: MPLAD15KP7.0A to 100CA
Pin injection protection per RTCA/DO-160D for Waveform 5A (40/120 µs):
o Level 4: MPLAD15KP7.0A to 28CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 °C: 15,000 watts at 10/1000 μs (also see Figures 1 and 2) with
impulse repetition rate (duty factor) of 0.05% or less
tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -55 °C to +150 °C
Thermal resistance: 0.2 °C/W junction to case or 50 °C/W junction to ambient when mounted on FR4 PC
board with recommended mounting pad (see page 2)
Steady-State Power dissipation: 50 watts at TC = 100 °C with good heat sink, or 2.5 watts at TA = 25 °C
if mounted on FR4 PC board as described for thermal resistance
Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3 ms half-sine wave (unidirectional devices only)
Solder temperatures: 260 °C for 10 s (maximum)
SURFACE MOUNT 15,000 W
Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Selections for 7.0 to 200 V standoff voltages (VWM)
- Fast response
_____
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
______________________________________________________________________________________________________________________________
RF01004 Rev C, November 2010 High Reliability Product Group Page 2 of 4
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
TERMINALS: Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) Compliant annealed matte-Tin plating readily
solderable per MIL-STD-750, method 2026
MARKING: Body marked with part number
POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number)
WEIGHT: 1 gram (approximately)
PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm]
SYMBOLS & DEFINITIONS
Definition
Symbol
Definition
Working Peak (Standoff) Voltage
IPP
Peak Pulse Current
Peak Pulse Power
VC
Clamping Voltage
Breakdown Voltage
IBR
Breakdown Current for VBR
Standby Current
POLARITY SYMBOL (FOR UNIDIRECTIONAL DEVICES ONLY)
_____
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
______________________________________________________________________________________________________________________________
RF01004 Rev C, November 2010 High Reliability Product Group Page 3 of 4
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI
PART NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
VOLTS
BREAKDOWN
VOLTAGE
VBR @ IBR
VOLTS mA
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
VOLTS
MAXIMUM
STANDBY
CURRENT
ID @ VWM
A
MAXIMUM
PEAK
PULSE
CURRENT
IPP (FIG. 3)
A
MAXIMUM
TEMPERATURE
COEFFICIENT
OF VBR
(αV(BR))
mV/ ºC
MPLAD15KP7.0A
MPLAD15KP7.0CA
7.0
7.78 8.60
150
12.0
3000
1251
5.0
MPLAD15KP7.5A
MPLAD15KP8.0A
MPLAD15KP7.5CA
MPLAD15KP8.0CA
7.5
8.0
8.33 9.21
8.89 9.83
5
5
12.9
13.6
750
450
1164
1101
6.0
6.0
MPLAD15KP8.5A
MPLAD15KP9.0A
MPLAD15KP8.5CA
MPLAD15KP9.0CA
8.5
9.0
9.44 10.4
10.0 11.1
5
5
14.4
15.4
150
60
1041
975
7.0
8.0
MPLAD15KP10A
MPLAD15KP11A
MPLAD15KP10CA
MPLAD15KP11CA
10
11
11.1 12.3
12.2 13.5
5
5
17.0
18.2
45
10
882
822
9.0
10
MPLAD15KP12A
MPLAD15KP13A
MPLAD15KP12CA
MPLAD15KP13CA
12
13
13.3 14.7
14.4 15.9
5
5
19.9
21.5
10
10
753
696
11
12
MPLAD15KP14A
MPLAD15KP15A
MPLAD15KP14CA
MPLAD15KP15CA
14
15
15.6 17.2
16.7 18.5
5
5
23.2
24.4
10
10
645
318
13
15
MPLAD15KP16A
MPLAD15KP17A
MPLAD15KP16CA
MPLAD15KP17CA
16
17
17.8 19.7
18.9 20.9
5
5
26.0
27.6
10
10
576
543
16
18
MPLAD15KP18A
MPLAD15KP20A
MPLAD15KP18CA
MPLAD15KP20CA
18
20
20.0 22.1
22.2 24.5
5
5
29.2
32.4
10
10
516
462
19
22
MPLAD15KP22A
MPLAD15KP24A
MPLAD15KP22CA
MPLAD15KP24CA
22
24
24.4 26.9
26.7 29.5
5
5
35.5
38.9
10
10
423
384
24
27
MPLAD15KP26A
MPLAD15KP28A
MPLAD15KP26CA
MPLAD15KP28CA
26
28
28.9 31.9
31.1 34.4
5
5
42.1
45.5
10
10
357
330
29
30
MPLAD15KP30A
MPLAD15KP33A
MPLAD15KP30CA
MPLAD15KP33CA
30
33
33.3 36.8
36.7 40.6
5
5
48.4
53.3
10
10
309
282
35
38
MPLAD15KP36A
MPLAD15KP40A
MPLAD15KP36CA
MPLAD15KP40CA
36
40
40.0 44.2
44.4 49.1
5
5
58.1
64.5
10
10
258
234
40
45
MPLAD15KP43A
MPLAD15KP45A
MPLAD15KP43CA
MPLAD15KP45CA
43
45
47.8 52.8
50.0 55.3
5
5
69.4
72.7
10
10
216
207
49
51
MPLAD15KP48A
MPLAD15KP51A
MPLAD15KP48CA
MPLAD15KP51CA
48
51
53.3 58.9
56.7 62.7
5
5
77.4
82.4
10
10
195
183
55
60
MPLAD15KP54A
MPLAD15KP58A
MPLAD15KP54CA
MPLAD15KP58CA
54
58
60.0 66.3
64.4 71.2
5
5
87.1
93.6
10
10
171
159
64
69
MPLAD15KP60A
MPLAD15KP64A
MPLAD15KP60CA
MPLAD15KP64CA
60
64
66.7 73.7
71.1 78.6
5
5
96.8
103.0
10
10
156
147
70
75
MPLAD15KP70A
MPLAD15KP75A
MPLAD15KP70CA
MPLAD15KP75CA
70
75
77.8 86.0
83.3 92.1
5
5
113
121
10
10
132
123
84
90
MPLAD15KP78A
MPLAD15KP85A
MPLAD15KP78CA
MPLAD15KP85CA
78
85
86.7 95.8
94.4 104.0
5
5
126
137
10
10
120
108
94
102
MPLAD15KP90A
MPLAD15KP100A
MPLAD15KP90CA
MPLAD15KP100CA
90
100
100 111
111 123
5
5
146
162
10
10
102
93
109
122
MPLAD15KP110A
MPLAD15KP120A
MPLAD15KP110CA
MPLAD15KP120CA
110
120
122 135
133 147
5
5
177
193
10
10
84
78
132
145
MPLAD15KP130A
MPLAD15KP150A
MPLAD15KP130CA
MPLAD15KP150CA
130
150
144 159
167 185
5
5
209
243
10
10
71
62
157
183
MPLAD15KP160A
MPLAD15KP170A
MPLAD15KP160CA
MPLAD15KP170CA
160
170
178 197
189 209
5
5
259
275
10
10
58
55
195
207
MPLAD15KP180A
MPLAD15KP200A
MPLAD15KP180CA
MPLAD15KP200CA
180
200
200 221
222 245
5
5
291
322
10
10
52
47
219
243
NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM, which should
be equal to or greater than the dc or continuous peak operating voltage level
NOTE 2: For bidirectional construction, indicate a CA suffix after the part number
NOTE 3: Items listed in Bold above are available ex-stock or with a short lead-time
_____
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
______________________________________________________________________________________________________________________________
RF01004 Rev C, November 2010 High Reliability Product Group Page 4 of 4
GRAPHS
tp Pulse Time sec
FIGURE 1 Peak Pulse Power vs. Pulse Time to 50 % of
Exponentially Decaying Pulse
TL Lead Temperature °C
Test waveform parameters: tr = 10 s, tp = 1000 s
FIGURE 2 : Pulse Waveform FIGURE 3: Derating Curve
PPP Peak Pulse Power - kW
Peak Pulse Power (PPP) or
continuous Power in Percent of
25°C Rating