1N4001 THRU 1N4007
Features
Mechanical Data
· The plastic package carries Underwrites Laboratory
Flammability Classification 94V-0
· Construction utilizes void-free molded plastic technique
· Low reverse leakage
· High forward surge current capability
· High temperature soldering guaranteed : 250℃/10 seconds,
0.375"(9.5mm) lead length, 5lbs.(2.3kg).
Maximum Ratings And Electrical Characteristics
· Case : JEDEC DO-41 molded plastic body
· Terminals : Lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.012 ounce, 0.33 gram
(Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Notes:
(1) Measured at 1MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted
CURRENT 1.0 Ampere
VOLTAGE 50 to 1000 Volts
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Volts
Peak forward surge current 8.3ms half sine
wave superimposed on rated load
(JEDEC method) at T
A
=75℃
V
DC
Maximum average forward rectified current
0.375"(9.5mm) lead length T
A
=75℃
Maximum instantaneous forward voltage
at 1.0A
V
RRM
50 Volts
Symbols 1N
4001 Units
1.1V
F
V
RMS
1.0
Amps30.0I
FSM
T
J
T
STG
50.0
-50 to +175 ℃
Volts
Amp
Maximum reverse current
at rated DC blocking voltage
Typical thermal resistance (Note 2)
Typical junction capacitance (Note 1)
Operating and storage temperature range
1N
4002 1N
4003 1N
4004 1N
4005 1N
4006 1N
4007
35
50
5.0
50.0
25.0
15.0
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
Volts
μA
℃/W
pF
I
(AV)
I
R
C
J
Rθ
JA
Rθ
JL
T
A
=25℃
T
A
=100℃
Maximum DC blocking voltage temperature +150 ℃
T
A
Dimensions in inches and (millimeters)
DO-41
1.0(25.4)
MIN.
1.0(25.4)
MIN.
0.205(5.2)
0.166(4.2)
0.034(0.9)
0.028(0.7)
DIA.
0.107(2.7)
0.080(2.0)
DIA.
FIG.1-FORWARD CURRENT DERATING CURVE
1000 25 1751501257550
0.8
0
0.2
1.0
0.6
0.4
LEAD TEMPERATURE ( ℃)
AVERAGE FORWARD CURRENT AMPERES
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
FIG.2-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
1.40.6 0.8 1.51.21.0
20
0.01
0.1
10
1
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
INSTANTANEOUS FORWARD CURRENT(AMPERES)
TJ=25℃
PULSE WIDTH=300
μ
S
1% DUTY CYCLE
FIG.3-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
101 100
40
0
10
50
30
20
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE
CURRENT (AMPERES)
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
FIG.5-TYPICAL JUNCTION CAPACITANCE
1
10
100
REVERSE VOLTAGE. VOLTS
JUNCTION CAPACITANCE(pF)
10
1100
0.1
TJ=25℃
FIG.4-TYPICAL REVERSE CHARACTERISTICS
0.01
0.1
10
1.0
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
INSTANTANEOUS REVERSE CURRENT (
μA
)
1000 20 140120806040
TJ=25℃
TJ=100℃
RATINGS AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007