MP4KE6.8A - MP4KE400CA(e3) Available Screening in reference to MIL-PRF-19500 available 400 Watt Transient Voltage Suppressors DESCRIPTION This family of high-reliability, plastic packaged Transient Voltage Suppressors offer high reliability at an affordable price. Standoff voltage values range from 5.8 to 342 volts and 5% or 10% tolerance options are available. Source control is standard and three increasingly stringent screening options for enhanced reliability are available. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * * * High reliability controlled devices with wafer fabrication and assembly lot traceability. All devices 100% surge tested. Optional screening in reference to MIL-PRF-19500 is also available. Refer to High Reliability NonHermetic Product portfolio for more details on Microsemi screening options. Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B. 3 lot norm screening performed on standby current (I D ). RoHS compliant versions available. DO-41 (DO-204AL) Package APPLICATIONS / BENEFITS * * * * * * Suppresses transients up to 400 watts @ 10/1000 s (see Figure 1). 2 Protects sensitive components such as IC's, CMOS, Bipolar, BiCMOS, ECL, DTL, T L, etc. Protection from switching transients & induced RF. Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively. Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1: MP4KE5.0A to MP4KE91CA Class 2: MP4KE5.0A to MP4KE47ACA Class 3: MP4KE5.0A to MP4KE24CA Class 4: MP4KE5.0A to MP4KE12CA Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1: MP4KE5.0A to MP4KE30CA Class 2: MP4KE5.0A to MP4KE15CA Also available in: J-bend Package (surface mount) MSMBJ5.0A - MSMBJ170A Gull-wing Package (surface mount) MSMBG5.0A - MSMBG170A MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance, Junction to Leads (1) @ 3/8 inch (10 mm) from body (2) Peak Pulse Power Dissipation @ 10/1000 s o (3) Off-State Power Dissipation @ TL = +25 C o (4) @ TA = +25 C o Forward Voltage @ 25 C with 8.3 ms half-sine wave (unidirectional only) Solder Temperature @ 10 s Symbol TJ and TSTG R JL P PP PD Value -65 to +150 50 Unit o C o C/W W W VF 400 2.5 1.13 3.5 TSP 260 o V C Notes: 1. Or 110 C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (see Figures 1, 2 and 3 for t W , waveform and derating effects). 3. At 3/8 (10 mm) lead length from body. 4. On FR4 PC board with 110C/W junction to ambient with 4 mm2 copper pads (1 oz) and track width 1 mm and length 25 mm. RF01006, Rev. B (5/8/13) (c)2013 Microsemi Corporation MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 6 MP4KE6.8A - MP4KE400CA(e3) MECHANICAL and PACKAGING * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number. POLARITY: Cathode indicated by band. Bi-directional not marked. TAPE & REEL option: Standard per EIA-296 (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: Approximately 0.3 grams. See Package Dimensions on last page. PART NOMENCLATURE M P4K E 6.8 C A Reliability Level* M (controlled product) MA (Avionics grade) MX ( reference JANTX) MXL (MX Lite) (*See High Reliability NonHermetic Product portfolio) (e3) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Voltage Tolerance A = 5% tolerance level Blank = 10% tolerance Point 4 kilowatt Polarity C = Bi-directional Blank = Unidirectional Encapsulated Plastic Package Stand-off Voltage Rating SYMBOLS & DEFINITIONS Definition Symbol V(BR) C I (BR) ID I PP P PP V (BR) VC V WM Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/C or mV/C. Capacitance: The capacitance in pF at a frequency of 1 MHz and specified voltage Breakdown Current: The current used for measuring Breakdown Voltage V (BR) . Standby Current: The current through the device at rated stand-off voltage. Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C . Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. RF01006, Rev. B (5/8/13) (c)2013 Microsemi Corporation Page 2 of 6 MP4KE6.8A - MP4KE400CA(e3) ELECTRICAL CHARACTERISTICS @ 25 oC PART NUMBER (Note 2) WORKING STAND OFF VOLTAGE VWM BREAKDOWN VOLTAGE V(BR) @ I(BR) MAXIMUM CLAMPING VOLTAGE VC@ IPP MAXIMUM STANDBY CURRENT ID @ VWM PEAK PULSE CURRENT (see Fig. 2) IPP MAXIMUM TEMPERATURE COEFFICIENT of V(BR) V(BR) MP4KE6.8A MP4KE7.5A MP4KE8.2A MP4KE9.1A Volts 5.80 6.40 7.02 7.78 MIN 6.45 7.13 7.79 8.65 MAX 7.14 7.88 8.61 9.55 mA 10 10 10 1 Volts 10.5 11.3 12.1 13.4 A 500 200 100 20 Amps 38 35 33 30 % / C 0.057 0.061 0.065 0.068 MP4KE10A MP4KE11A 8.55 9.40 9.50 10.5 10.5 11.6 1 1 14.5 15.6 5 2 28 26 0.073 0.075 MP4KE12A MP4KE13A 10.2 11.1 11.4 12.4 12.6 13.7 1 1 16.7 18.2 1 1 24 22 0.078 0.081 MP4KE15A MP4KE16A 12.8 13.6 14.3 15.2 15.8 16.8 1 1 21.2 22.5 1 1 19 18 0.084 0.086 MP4KE18A MP4KE20A 15.3 17.1 17.1 19.0 18.0 21.0 1 1 25.2 27.7 1 1 16 14.5 0.088 0.090 MP4KE22A MP4KE24A MP4KE27A MP4KE30A 18.8 20.5 23.1 25.6 20.9 22.8 25.7 28.5 23.1 25.2 28.4 31.5 1 1 1 1 30.6 33.2 37.5 41.4 1 1 1 1 13 12 11 9.5 0.092 0.094 0.096 0.097 MP4KE33A MP4KE36A MP4KE39A MP4KE43A 28.2 30.8 33.3 36.8 31.4 34.2 37.1 40.9 34.7 37.8 41.0 45.2 1 1 1 1 45.7 49.9 53.9 59.3 1 1 1 1 9.0 8.0 7.5 7.0 0.098 0.099 0.100 0.101 MP4KE47A MP4KE51A MP4KE56A MP4KE62A 40.2 43.6 47.8 53.0 44.7 48.5 53.2 58.9 49.4 53.6 58.8 65.1 1 1 1 1 64.8 70.1 77.0 85.0 1 1 1 1 6.2 5.7 5.2 4.7 0.101 0.102 0.103 0.104 MP4KE68A MP4KE75A 58.1 64.1 64.6 71.3 71.4 78.8 1 1 92.0 103.0 1 1 4.4 3.9 0.104 0.105 MP4KE82A MP4KE91A 70.1 77.8 77.9 86.5 86.1 95.5 1 1 113.0 125.0 1 1 3.5 3.2 0.105 0.106 MP4KE100A MP4KE110A MP4KE120A MP4KE130A 85.5 94.0 102.0 111.0 95.0 105.0 114.0 124.0 105.0 116.0 126.0 137.0 1 1 1 1 137.0 152.0 165.0 179.0 1 1 1 1 2.9 2.6 2.4 2.2 0.106 0.107 0.107 0.107 MP4KE150A MP4KE160A MP4KE170A MP4KE180A 128.0 136.0 145.0 154.0 143.0 152.0 162.0 171.0 158.0 168.0 179.0 189.0 1 1 1 1 207.0 219.0 234.0 246.0 1 1 1 1 1.95 1.8 1.7 1.6 0.108 0.108 0.108 0.108 MP4KE200A MP4KE220A 171.0 185.0 190.0 209.0 210.0 231.0 1 1 274.0 328.0 1 1 1.5 1.0 0.108 0.110 MP4KE250A MP4KE300A 214.0 256.0 237.0 285.0 263.0 315.0 1 1 344.0 414.0 1 1 1.0 1.0 0.110 0.110 MP4KE350A MP4KE400A 300.0 342.0 333.0 380.0 368.0 420.0 1 1 482.0 548.0 1 1 1.0 1.0 0.110 0.110 NOTE 1: Forward Voltage (V F ) @ 30 amps peak, 8.3 ms sine wave equal to 3.5 volts maximum for MP4KE6.8A to 200A (excluding bidirectional). NOTE 2: For bidirectional construction, indicate a CA suffix after part number. Bidirectional capacitance is half that shown in Figure 4 at zero volts. RF01006, Rev. B (5/8/13) (c)2013 Microsemi Corporation Page 3 of 6 MP4KE6.8A - MP4KE400CA(e3) PPP -Peak Pulse Power (kW) GRAPHS t w - Pulse Width Pulse Current in Percent of IPP FIGURE 1 Peak Pulse Power vs. Pulse Time t - Time - ms FIGURE 2 Pulse Waveform for Exponential Surge RF01006, Rev. B (5/8/13) (c)2013 Microsemi Corporation Page 4 of 6 MP4KE6.8A - MP4KE400CA(e3) Peak Pulse Power (PPP) or continuous Average Power in Percent of 25C Rating GRAPHS Lead or Ambient Temperature C C - Capacitance - Picofarads FIGURE 3 Derating Curve V (BR) -Breakdown Voltage - Volts FIGURE 4 MP4KE Typical Capacitance vs. Breakdown Voltage (Unipolar) RF01006, Rev. B (5/8/13) (c)2013 Microsemi Corporation Page 5 of 6 MP4KE6.8A - MP4KE400CA(e3) PACKAGE DIMENSIONS NOTES: Cathode indicated by band. Dim LL BL BD LD RF01006, Rev. B (5/8/13) (c)2013 Microsemi Corporation Dimensions Inches Millimeters Min Max Min Max 1.00 25.4 0.205 5.207 0.107 2.72 0.030 0.034 0.76 0.86 Page 6 of 6