Typ/Type G450 Mastab/Scale 9:1 N Hitzebestandig und elektrisch stabil durch Glasumhullung N Automatisch bestuckbares Bauelement N Geeignet fur Schwall- und Reflowlotung N Elektroden mit Lotzinn beschichtet N Mechanisch stabil Klimaprufklasse (IEC 68-1) Climatic category (IEC 68-1) Widerstandstoleranz Resistance tolerance R/R N Nenntemperatur Rated temperature TN Warmeleitwert (Luft) Dissipation factor (in air) th Therm. Abkuhlzeitkonstante (Luft) Thermal cooling constant (in air) C N Glass-encapsulated, heat-resistive and electrically stable N Suitable for automatic placement N Suitable for wave and reflow soldering N Solder-plated electrodes N Mechanically strong Bestell-Nr. Ordering code 55/200/56 R25 B25/85 K 5k 10 k 30 k 50 k 100 k 3420 3496 3986 3986 4050 B574503 %1), 5 %1) 25 C approx. 1,3 mW/K approx. 5 s G502- +62 G103- +62 G303- +62 G503- +62 G104- +62 2 2 2 2 2 % % % % % 1) Abweichung von R25 nach Lotwarmebestandigkeitstest (350 C 10 C, 3 sec.); R25 = 3 %. Deviation of R25 after soldering heat test (350 C 10 C, 3 sec.); R25 = 3 %. +: H fur R/RN = 3 % / for R/RN = 3 % J fur R/RN = 5 % / for R/RN = 5 % Typ/ Type G350 N N N N N N Mastab/Scale 2:1 Hitzebestandig und stabil durch Glasumhullung Fur Temperaturmessung bis zu 300 C Axiale Ausfuhrung Kostengunstig Vernickelte Drahte Verschiedene Drahtbeschichtungen auf Anfrage Klimaprufklasse (IEC 68-1) Climatic category (IEC 68-1) Widerstandstoleranz Resistance tolerance R/R N Nenntemperatur Rated temperature TN Warmeleitwert (Luft) Dissipation factor (in air) th Therm. Abkuhlzeitkonstante (Luft) Thermal cooling constant (in air) C Warmekapazitat Heat capacity Cth N N N N N N Glass-encapsulated, heat-resistive and highly stable For temperature measurement up to 300 C Axial-lead version Cost-effective Nickel-plated wires Different lead platings on request Bestell-Nr. R25 Ordering code 55/300/56 B25/85 B0/100 K K B573503 %, 5 % 25 C 1,9 ... 3,0 mW/K approx. 12 s approx. 30 mJ/K G202- +256 G502- +256 G103- +256 G203- +256 G503- +256 G104- +256 2k 5k 10 k 20 k 50 k 100 k 3528 3480 3480 3992 3992 4066 53 50 50 40 40 40 3500 3450 3450 3970 3970 4036 1,5 % 1% 1% 1% 1% 1% +: H fur R/RN = 3 % / for R/RN = 3 % J fur R/RN = 5 % / for R/RN = 5 % All dimensions are given in mm. The commas used in numerical values denote decimal points. 2 EPCOS AG