LITE-ON SEMICONDUCTOR GBU404 thru GBU410 REVERSE VOLTAGE - 400 to 1000 Volts FORWARD CURRENT - 4.0 Amperes GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES GBU Rating to 1000V PRV Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique The plastic material has UL flammability classification 94V-0 A G C H UL Recognition File # E95060 I B P - N O N J + ~ ~ K N N D L MECHANICAL DATA E M Polarity : As marked on Body Weight : 0.15 ounces, 4.0 grams Mounting position : Any F GBU DIM. MIN. MAX. A 21.80 22.30 B 18.30 18.80 C 3.30 3.56 D 17.50 18.00 E 0.76 1.00 0.46 0.56 F 7.40 7.90 G 3.50 4.10 H I 1.65 2.16 2.25 2.75 J 1.95 2.35 K L 1.02 1.27 4.83 5.33 M 7.0 TYPICAL N 3.2 x 45 O P 1.90 RADIUS All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward (with heatsink Note 2) Rectified Current @TC=100 C (without heatsink) Peak Forward Surge Current (Non-repetitive) 8.3ms single half Tj=25 sine-wave superimposed on Tj=125 rated load VRRM VRMS VDC GBU 404 400 280 400 I(AV) 4.0 2.4 GBU 410 1000 700 1000 UNIT V V V A 160 150 A IFSM Tj=25 Tj=125 1ms single half sine-wave GBU 408 800 560 800 GBU 406 600 420 600 320 300 Maximum forward Voltage at 2.0A DC VF 1.0 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 5.0 500 uA @TJ =25 C @TJ =125 C I 2 t Rating for fusing (3ms t 8.3ms) I t 93 AS Typical Junction Capacitance per element (Note 1) CJ 40 pF R JC R JA R JL 3.0 15 3.0 /W TJ -55 to +150 TSTG -55 to +150 Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range 2 NOTE : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink. 2 REV. 12, Sep-2012, KBDJ01 RATING AND CHARACTERISTIC CURVES GBU404 thru GBU410 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG.1 - FORWARD CURRENT DERATING CURVE 5.0 WITH HEATSINK 4.0 3.0 WITHOUT HEATSINK 2.0 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 0 20 40 60 80 100 120 140 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 180 160 140 120 100 80 60 40 20 Single Half-Sine-Wave 0 1 2 5 CASE TEMPERATURE , () 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT ,(A) 100 10 TJ = 25 , f = 1MHz 1 TJ = 125 10 TJ = 25 1 PULSE WIDTH 300us 0.1 1 4 10 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE , (V) REVERSE VOLTAGE , (V) FIG.5 - TYPICAL REVERSE CHARACTERISTICS FIG.6 - NON-REPETITIVE SURGE CURRENT 1000 1000 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE , (pF) 20 10 NUMBER OF CYCLES AT 60Hz TJ = 125 100 TJ = 100 10 TJ = 50 1.0 TJ = 25 TJ = 25 100 TJ = 125 Sine Wave _____ Square Wave - - - - - - 10 1 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 10 tp, (ms) RATING AND CHARACTERISTIC CURVES GBU404 thru GBU410 FIG.7 - Admissible Repetitive Peak Forward Current vs. Pulse Duration 100 V=0.1 V=0.2 V=0.5 IFRM(A) 10 1 0.1 0.0001 0.001 0.01 tp, Pulse Duration Time (sec) 0.1 1 Legal Disclaimer Notice GBU404 thru GBU410 Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.