HMC635LC4 v02.0218 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT GaAs PHEMT MMIC DRIVER AMPLIFIER, 18 - 40 GHz Typical Applications Features The HMC635LC4 is ideal for: Gain: 18.5 dB [2] * Point-to-Point Radios P1dB: +22 dBm [2] * Point-to-Multi-Point Radios & VSAT Output IP3: +27 dBm * LO Driver for Mixers Saturated Power: +23.5 dBm @ 15% PAE [2] * Military & Space Supply Voltage: +5V @ 280 mA 50 Ohm Matched Input/Output 24 Lead Ceramic 4x4mm SMT Package: 16mm2 Functional Diagram General Description The HMC635LC4 is a GaAs PHEMT MMIC Driver Amplifier die which operates between 18 and 40 GHz. The amplifier provides 18.5 dB of gain, +27 dBm Output IP3, and +22 dBm of output power at 1 dB gain compression, while requiring 280 mA from a +5V supply. Ideal as a driver amplifier for microwave radio applications, or as an LO driver for mixers operating between 18 and 40 GHz, the HMC635LC4 is capable of providing up to +23.5 dBm of saturated output power at 15% PAE. The amplifier's I/Os are DC blocked and internally matched to 50 Ohms making it ideal for integration into Multi-Chip-Modules (MCMs). Electrical Specifications TA = +25 C, Vdd= Vdd1, 2, 3, 4 = +5V, Idd= Idd1 + Idd2 + Idd3 + Idd4 = 280mA Parameter Min. Frequency Range Typ. Max. Min. 18 - 36 Gain [2] 15 Gain Variation Over Temperature 18.5 0.045 15 0.06 Typ. [1] Max. Units 36 - 40 GHz 17.5 dB 0.045 0.06 dB/ C Input Return Loss 13 7 dB Output Return Loss 10 7 dB Output Power for 1 dB Compression (P1dB) [2] 19 Saturated Output Power (Psat) [2] Output Third Order Intercept (IP3) Noise Figure [2] Total Supply Current (Idd1 + Idd2 + Idd3 + Idd4) 22 16 23.5 22 27 21 21 dBm 21.5 dBm 26 dBm 7 7 dB 280 280 mA [1] Adjust Vgg1 = Vgg2 between -2 to 0V to achieve Idd= 280 mA Typical. [2] Board loss subtracted out for gain, power and noise figure measurements. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC635LC4 v02.0218 GaAs PHEMT MMIC DRIVER AMPLIFIER, 18 - 40 GHz 25 25 15 20 S21 S11 S22 5 -5 15 +25C - 40C 10 5 -15 0 -25 10 15 20 25 30 35 40 45 16 50 21 Input Return Loss vs. Temperature 31 36 41 Output Return Loss vs. Temperature 0 0 +25C - 40C -5 +25C - 40C -5 RETURN LOSS (dB) RETURN LOSS (dB) 26 FREQUENCY (GHz) FREQUENCY (GHz) -10 -15 -10 -15 -20 -20 -25 16 21 26 31 36 41 16 21 FREQUENCY (GHz) 31 36 41 36 41 Psat vs. Temperature [1] 26 26 24 24 Psat (dBm) P1dB (dBm) P1dB vs. Temperature [1] 22 +25C - 40C 20 26 FREQUENCY (GHz) 18 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Gain vs. Temperature [1] GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss [1] 22 +25C - 40C 20 18 16 16 16 21 26 31 36 41 16 FREQUENCY (GHz) 21 26 31 FREQUENCY (GHz) [1] Board loss subtracted out for gain, power and noise figure measurements. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2 HMC635LC4 v02.0218 GaAs PHEMT MMIC DRIVER AMPLIFIER, 18 - 40 GHz Power Compression @ 30 GHz [1] Power Compression @ 40 GHz [1] Pout (dBm), GAIN (dB), PAE (%) Pout (dBm), GAIN (dB), PAE (%) 30 Pout (dBm) Gain (dB) PAE (%) 25 20 15 10 5 0 -15 -10 -5 0 5 Pout (dBm) Gain (dB) PAE (%) 25 20 15 10 5 0 -15 10 -10 INPUT POWER (dBm) 0 5 10 Noise Figure vs. Temperature [1] 40 15 36 +25 C -40 C NOISE FIGURE (dB) 12 +25 C -40 C 32 28 24 9 6 3 20 16 0 16 21 26 31 36 41 16 21 FREQUENCY (GHz) 26 31 36 41 FREQUENCY (GHz) Gain & Power vs. Supply Voltage @ 30 GHz [1] Reverse Isolation vs. Temperature 26 0 -10 24 22 ISOLATION (dB) GAIN (dB), P1dB (dBm), Psat (dBm) -5 INPUT POWER (dBm) Output IP3 vs. Temperature IP3 (dBm) AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 30 Gain P1dB Psat 20 +25C - 40C -20 -30 -40 -50 18 -60 16 4.5 -70 4.7 4.9 5.1 5.3 5.5 16 Vdd (V) 21 26 31 36 41 FREQUENCY (GHz) [1] Board loss subtracted out for gain, power and noise figure measurements. 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC635LC4 v02.0218 GaAs PHEMT MMIC DRIVER AMPLIFIER, 18 - 40 GHz Drain Bias Voltage (Vdd1, 2, 3, 4) +5.5V Vdd (V) Idd (mA) Gate Bias Voltage (Vgg1, Vgg2) -3 to 0V 4.5 277 RF Input Power (RFIN)(Vdd = +5 Vdc) 15 dBm 5.0 280 Channel Temperature 175 C 5.5 286 Continuous Pdiss (T= 70 C) (derate 15.1 mW/C above 70 C) Note: Amplifier will operate over full voltage ranges shown above 1.575 W Thermal Resistance (channel to package base) 66.4 C/W Storage Temperature -65 to +150 C Operating Temperature -55 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 24-Terminal Ceramic Leadless Chip Carrier [LCC] (E-24-1) Dimensions shown in millimeters. Outline Drawing PIN 1 INDICATOR 0.36 0.30 0.24 0.08 BSC 1 0.50 BSC 2.60 2.50 SQ 2.40 EXPOSED PAD 13 TOP VIEW 1.00 0.90 0.80 SIDE VIEW 0.32 BSC PIN 1 24 19 18 6 12 BOTTOM VIEW 7 2.50 REF 3.10 BSC FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. PKG-004840 SEATING PLANE 02-27-2017-B 4.05 3.90 SQ 3.75 24-Terminal Ceramic Leadless Chip Carrier [LCC] (E-24-1) Dimensions shown in millimeters. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Typical Supply Current vs. Vdd Absolute Maximum Ratings Package Information Part Number Package Body Material Lead Finish HMC635LC4 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H635 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 4 HMC635LC4 v02.0218 GaAs PHEMT MMIC DRIVER AMPLIFIER, 18 - 40 GHz AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Pin Descriptions Pin Number Function Description Interface Schematic 1, 2, 4 - 8, 10, 12 - 15, 17 - 19, 24, Ground Paddle GND These pins and package bottom must be connected to RF/DC ground 3 RFIN This pad is AC coupled and matched to 50 Ohms. 16 RFOUT This pad is AC coupled and matched to 50 Ohms. 9, 11 Vgg1, Vgg2 Gate control for amplifier, please follow "MMIC Amplifier Biasing Procedure" application note. See assembly diagram for required external components. 20 - 23 Vdd4 - Vdd1 Power Supply Voltage for the amplifier. See assembly diagram for required external components. Application Circuit 2 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC635LC4 v02.0218 GaAs PHEMT MMIC DRIVER AMPLIFIER, 18 - 40 GHz List of Materials for Evaluation 122763 Item Description J1 - J2 2.92 mm PC Mount K-Connector VD1 - VD4, VGG1, VGG2 DC Pin C1 - C6 100 pF Capacitor, 0402 Pkg. C7 - C12 1000 pF Capacitor, 0603 Pkg. C13 - C18 4.7 F Capacitor, Tantalum, Case A U1 HMC635LC4 Driver Amplifier PCB [2] 122761 Evaluation PCB [3] [1] Reference this number when ordering complete evaluation PCB [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR [3] Due to the very high frequency operation of this product a custom LC4 PCB footprint and solder stencil are required for this design. Performance shown in this data sheet was produced using this custom footprint. DO NOT USE Hittite's standard LC4 footprint. Please contact Applications for details. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC635LC4 HMC635LC4TR 122763-HMC635LC4