HD26LS32A Quadruple Differential Line Receivers With 3 State Outputs REJ03D0296-0200Z (Previous ADE-205-578 (Z)) Rev.2.00 Jul.16.2004 Description The HD26LS32A features quadruple line receivers designed to meet the specs of EIA standard RS-422A and RS-423. This device operates from a single 5 V power supply. The enable function is common to all four receivers and offers a choice of active high or active low input. Fail safe design ensures that if the inputs are open, the outputs will always be high. Features * Ordering Information Part Name HD26LS32AP Package Type Package Code DILP-16 pin (JEITA) DP-16E, -16FV Package Abbreviation Taping Abbreviation (Quantity) P -- Logic Diagram 1A 1B 2A 2B 3A 3B 4A 4B Enable G Enable G Rev.2.00, Jul.16.2004, page 1 of 7 1Y 2Y 3Y 4Y HD26LS32A Pin Arrangement 1B 1 16 VCC 1A 2 15 4B 1Y 3 14 4A Enable G 4 13 4Y 2Y 5 12 Enable G 2A 6 11 3Y 2B 7 10 3A GND 8 9 3B (Top view) Function Table Differential Input A-B VID V TH VID V TL X : : : : : Output Y G H X H X H X L VTL < VID < VTH H L X ? Z Enable G X L X L X L H H H ? ? L L Z High level Low level Immaterial Irrelevant High impedance Absolute Maximum Ratings Item Symbol 1 Ratings Unit Supply Voltage VCC* 7.0 V Input Voltage A or B VIN 25 V Differential Input Voltage VID*2 25 V Enable Input Voltage VIN 7 V Output Sink Current Iout 50 mA Continuous Total Dissipation PT 1 W Operating Temperature Topr 0 to +70 C Storage Temperature Tstg -65 to 150 C Notes: 1. All voltage values except for differential input voltage are with respect to network ground terminal. 2. Differential input voltage is measured at the noninverting input with respect to the corresponding inverting input. 3. The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.2.00, Jul.16.2004, page 2 of 7 HD26LS32A Recommended Operating Conditions Item Symbol Supply Voltage In Phase Input Voltage Output Current VCC VIC IOH IOL Topr Operating Temperature Min Typ 4.75 -- -- -- 0 5.00 -- -- -- -- Max 5.25 7.0 -440 8 70 Unit V V A mA C Electrical Characteristics (Ta = 0 to +70C) Item Differential Input High Threshold Voltage Differential Input Low Threshold Voltage Input Hysteresis*2 Enable Input Voltage Enable Input Clamp Voltage Output Voltage Off State (High Impedance) Output Current Line Input Current Enable Input Current Symbol Min Typ*1 Max VTH -- -- 0.2 VTL -- -- -- 2.0 -- -- -- -- 50 -- -- -- -0.2 -0.2 -- -- 0.8 -1.5 2.7 -- -- -- -- -- -- -- -- -- -- 0.4 0.45 20 -20 -- -- -- -- -- 12 -15 -- -- -- -- -- 15 -- 1.2 -1.7 100 20 -0.36 -- -85 VTH - VTL VIH VIL VIK VOH VOL IOZ II II (EN) IIH IIL ri IOS*3 Unit V Conditions VIC = -7 to +7 V VOH = 2.7V, IOH = -440 A VOL = 0.4 V, IOL = 4 mA VOL = 0.45 V, IOL = 8 mA mV V VCC = 4.75 V, IIN = -18 mA VCC = 4.75 V VIL (G) = 0.8 V VID = 1 V, IOH = -440 A VID = -1 V, IOL = 4 mA VID = -1 V, IOL = 8 mA VO = 2.4 V VO = 0.4 V A VCC = 5.25 V mA VI = 15 V, Other Inputs -10 to +15 V VI = -15 V, Other Inputs -15 to +10 V VI = 5.5 V VI = 2.7 V VI = 0.4 V VIC = -15 to +15 V (Other Inputs AC GND) VCC = 5.25 V A mA Input Resistance k Short Circuit Output mA Current Supply Current ICC -- 52 70 VCC = 5.25 V, VI = 0 V (All Outputs Disable) Notes: 1. All typical values are at VCC = 5 V, Ta = 25C,VIC = 0. 2. Hysteresis is the differential between the positive going input threshold voltage and the negative going input threshold voltage. 3. Not more than one output should be shorted at a time. Switching Characteristics (VCC = 5 V, Ta = 25C) Item Propagation Delay Time Output Enable Time Output Disable Time Rev.2.00, Jul.16.2004, page 3 of 7 Symbol tPLH tPHL tZH tZL tHZ tLZ Min -- -- -- -- -- -- Typ 20 22 17 20 21 30 Max 35 35 22 25 30 40 Unit Conditions ns CL = 15 pF ns CL = 15 pF ns CL = 5 pF HD26LS32A 1. tPLH, tPHL Test circuit VCC Input Output 2 k Pulse Generator CL 5 k 2V Waveforms 2.5 V Input A 0V 0V -2.5 V 2.5 V Input B 0V 0V -2.5 V t PLH t PHL VOH Output 1.3 V 1.3 V VOL Rev.2.00, Jul.16.2004, page 4 of 7 HD26LS32A 2. tHZ, tZH Test circuit VCC Output 2 k S1 2.5 V CL 5 k Input Pulse Generator 2V Waveforms 3V Enable G 1.3 V 1.3 V 0V 3V Enable G 1.3 V 1.3 V 0V S1 : Open t ZH Output Rev.2.00, Jul.16.2004, page 5 of 7 1.3 V S1 : Closed t HZ 0.5 V VOH 1.4 V 0V HD26LS32A 3. tLZ, tZL Test circuit VCC Output 2 k -2.5 V CL 5 k Input Pulse Generator S2 2V Waveforms 3V Enable 1.3 V 1.3 V 0V 3V Enable G 1.3 V 1.3 V 0V S2 : Open t ZL S2 : Closed t LZ VOH Output Notes: 1.3 V 1.4 V 0.5 V 1. The pulse generator has the following characteristics: PRR = 1 MHz, 50% duty cycle, tr 6 ns, t f 6 ns, Zout = 50 . 2. CL includes probe and jig capacitance. 3. All diodes are 1S2074(H). 4. To test G input, ground G input and apply an inverted input waveform. Rev.2.00, Jul.16.2004, page 6 of 7 VOL HD26LS32A Package Dimensions As of January, 2003 Unit: mm 19.2 20.32 Max 9 6.3 7.4 Max 16 1 8 0.48 0.1 2.54 0.25 2.54 Min 5.06 Max 0.51 Min 1.3 0.89 7.62 + 0.1 0.25 - 0.05 0 - 15 Package Code JEDEC JEITA Mass (reference value) DP-16E Conforms Conforms 1.05 g Unit: mm 19.2 20.32 Max 9 6.3 7.4 Max 16 1 8 *0.48 0.08 2.54 Min 5.06 Max 2.54 0.25 1.3 0.51 Min 0.89 7.62 *0.25 0.06 0 - 15 *NI/Pd/AU Plating Rev.2.00, Jul.16.2004, page 7 of 7 Package Code JEDEC JEITA Mass (reference value) DP-16FV Conforms Conforms 1.05 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0