GBL Package
Mechanical Data
Weight: 0.071 oz, 2.0 g
Parameter Symbol GBL005 GBL01 Unit
Repetitive peak reverse voltage
Tj-55 to 150 -55 to 150 °C
Tstg -55 to 150 -55 to 150 °C
Parameter Symbol GBL005 GBL01 Unit
4.0 4.0
3.0 3.0
Peak forward surge current IFSM 135 135 A
Maximum instantaneous forward
voltage drop per leg
1.1 1.1
5 5
500 500
Rating for fusing
Typical junction capacitance per
leg (Note 3)
1 - Unit mounted on 3.0" x 3.0" x 0.11" (75 mm x 75 mm x 3 mm) Al plate
3 - Measured at 1.0 MHz and applied reverse bias of 4.0 V
• Ideal for printed circuit boards
2 - Unit mounted on P.C.B. At 0.375" (9.5 mm) lead length and 0.5" x 0.5" (12 mm x
12 mm) copper pads
Typical thermal resistance per leg
Single phase, half sine wave, 60 Hz, resistive or inductive load
For capacitive load derate current by 20%
• High case dielectric strength
Case: Molded plastic body over passivated junctions
• High surge current capability
Terminals: Plated leads, solderable per MIL-STD-750 Method 2026.
• Typical IR less than 0,1 A
Electrical characteristics at Tc = 25 °C, unless otherwise specified
Maximum DC reverse current at
rated DC blocking voltage per leg
Maximum average forward rectified
current
Maximum ratings at Tc = 25 °C, unless otherwise specified
Single Phase Glass Passivated
Silicon Bridge Rectifier
• This series is UL listed under the Recognized
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated chip junction
1
Oct. 2018 http://www.diodemodule.com/silicon_products/bridge_rectifiers/gbl04.pdf