KBL005 thru KBL10
Vishay Semiconductors
formerly General Semiconductor
Document Number 88655 www.vishay.com
13-Aug-03 1
Single-Phase Bridge Rectifier Reverse Voltage 50 and 1000 V
Forward Current 4.0 A
0.220 (5.6)
0.180 (4.6)
0.768 (19.5)
0.726 (18.5)
0.091 (2.30)
0.077 (1.95)
0.052 (1.3) Dia.
0.048 (1.2) Typ.
0.591 (15.0)
0.567 (14.4)
1.1
(27.9)
MIN.
0.640 (16.3)
0.600 (15.2)
1.0
(25.4)
MIN.
0.256 (6.5)
0.236 (6.0)
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
KBL KBL KBL KBL KBL KBL KBL
Symbols 005 01 02 04 06 08 10 Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward output
current at TA=50°CIF(AV) 4.0 A
Peak forward surge current single
sine-wave superimposed on rated load IFSM 200 A
(JEDEC Method) TJ=150°C
Typical thermal resistance per leg (NOTE 1) RΘJA 19
(NOTE 2) RΘJL 2.4 °C/W
Operating junction storage and temperature range TJ, TSTG -50 to +150 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Maximum instantaneous forward drop per leg
at 4.0 A VF1.1 V
Maximum DC reverse current at rated TA= 25°C 5.0 µA
DC blocking voltage per leg TA=125°CIR1.0 mA
Notes:
(1) Thermal resistance from junction to ambient with units mounted on 3.0 x 3.0 x 0.11” thick (7.5 x 7.5 x 0.3cm) Al. plate
(2) Thermal resistance from junction to lead with units mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5" (12 x 12mm) copper pads
Dimensions in inches and (millimeters)
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL listed under the Recognized
Component Index, file number E54214
• High case dielectric strength of 1500 VRMS
• Ideal for printed circuit boards
• High forward surge current capability
• High surge current capability
Mechanical Data
Case: Molded plastic body
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026.
High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3kg) tension
Mounting Position: Any
Weight: 0.2 oz., 5.6 g
Packaging codes/options:
1/300 EA. per Bulk Tray Stack
Case Style KBL
KBL005 thru KBL10
Vishay Semiconductors
formerly General Semiconductor
www.vishay.com Document Number 88655
213-Aug-03
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
Temperature (°C)
Fig. 1 – Derating Curve
Output Rectified Current
Average Forward Current (A)
Fig. 3 – Typical Instantaneous
Forward Characteristics Per Leg
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
Fig. 4 – Typical Reverse Leakage
Characteristics Per Leg
Number of Cycles at 60 HZ
Fig. 2 – Maximum Non-Repetitive Peak
Forward Surge Current Per Leg
Peak Forward Surge Current (A)
Reverse Voltage (V)
Junction Capacitance, pF
Fig. 5 – Typical Junction
Capacitance Per Leg
050 100 150
0
1.0
2.0
3.0
4.0
110 100
25
50
75
100
125
150
175
200
0.6 0.7
100
1.0
1
0.1 0.8 0.9 1.0 1.1 1.2 1.3
020 40 60 80 100
0.01
0.1
1
10
0.1 110 100
0
50
100
150
200
250
TJ = 100°C
TJ = 25°C
P.C.B. Mounting
0.375" (9.5mm) Lead Length
60 HZ Resistive or Inductive Load
Heatsink Mounted
3.0" sq. x 0.06" Thk
(7.5 x 0.15cm) Copper Plate
1.0 Cycle
TJ = 150°C
Single Sine-Wave
(JEDEC Method)
T
J
= 25°C
Pulse Width = 300µs
1% Duty Cycle
TJ = 25°C
f = 1.0MHZ
Vsig = 50mVp-p
