Bulletin PD-2.439 rev. G 07/04 30BQ040 SCHOTTKY RECTIFIER 3 Amp IF(AV) = 3.0Amp VR = 40V Description/ Features Major Ratings and Characteristics Characteristics 30BQ040 Units The 30BQ040 surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. IF(AV) Rectangular waveform 3.0 A VRRM 40 V Small foot print, surface mountable IFSM @ t p= 5 s sine 2000 A Very low forward voltage drop High frequency operation VF @ 3.0 Apk, TJ = 125C 0.43 V Guard ring for enhanced ruggedness and long term reliability TJ range - 55 to 150 C Case Styles 30BQ040 SMC www.irf.com 1 30BQ040 Bulletin PD-2.439 rev. G 07/04 Voltage Ratings Part number VR 30BQ040 Max. DC Reverse Voltage (V) 40 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 30BQ IF(AV) Max. Average Forward Current 3.0 Units Conditions A 4.0 IFSM 50% duty cycle @ TL = 118 C, rectangular wave form 50% duty cycle @ TL= 110 C, rectangular wave form Max. Peak One Cycle Non-Repetitive 2000 Surge Current 110 A EAS Non Repetitive Avalanche Energy 6.0 mJ IAR Repetitive Avalanche Current 1.0 A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 C, IAS = 1.0A, L = 12mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical Electrical Specifications Parameters VFM IRM 30BQ Max. Forward Voltage Drop (1) Max. Reverse Leakage Current (1) Units Conditions 0.53 V @ 3A 0.68 V @ 6A 0.43 V @ 3A TJ = 25 C TJ = 125 C 0.57 V 0.5 mA TJ = @ 6A 30 mA TJ = 125 C 25 C VR = rated VR CT Max. Junction Capacitance 230 pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25C LS Typical Series Inductance 3.0 nH Measured lead to lead 5mm from package body 10000 V/s dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 30BQ TJ Max. Junction Temperature Range (*) - 55 to 150 Tstg Max. Storage Temperature Range RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight - 55 to 150 46 C/W DC operation 0.24 (0.008) g (oz.) IR3F < Rth( j-a) C (**) Device Marking dTj C C/W DC operation SMC 1 Conditions 12 Case Style (*) dPtot Units Similar to DO-214AB thermal runaway condition for a diode on its own heatsink (**) Mounted 1 inch square PCB 2 www.irf.com 30BQ040 Bulletin PD-2.439 rev. G 07/04 100000 T J = 150C 125C 10000 100C 1000 75C 50C 100 25C 10 1 T = 150C J 0 10 20 30 Reverse Voltage - VR (V) T = 125C J 1 40 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T = 25C J Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) Reverse Current - I R (A) 10 0.1 T J = 25C 100 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Forward Voltage Drop - VFM (V) 0 Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 5 10 15 20 25 30 35 40 45 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance Z thJC (C/W) 100 10 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 1 t2 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdm x ZthJC+Tc 0.1 0.00001 0.0001 0.001 0.01 1 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z www.irf.com Notes: 0.1 thJC 10 100 Characteristics (Per Leg) 3 30BQ040 Bulletin PD-2.439 rev. G 07/04 2 150 D=0.20 D=0.25 D=0.33 D=0.50 D=0.75 DC 140 130 Average Power Loss (Watts) Allowable Lead Temperature (C) 160 120 110 100 90 Square wave (D = 0.50) 80% Rated Vr applied 80 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 1.5 DC RMS Limit 1 0.5 see note (2) 70 0 0 1 2 3 4 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current 10000 Non-Repetitive Surge Current - I FSM (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature 1000 100 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - Tp (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 30BQ040 Bulletin PD-2.439 rev. G 07/04 Outline Table Device Marking: IR3F 2.75 (.108) 3.15 (.124) 5.59 (.220) 6.22 (.245) CATHODE 6.60 (.260) 1 7.11 (.280) ANODE 2 .152 (.006) .305 (.012) 1 POLARITY 2.00 (.079) 2.62 (.103) 2 PART NUMBER .102 (.004) 0.76 (.030) 1.52 (.060) 7.75 (.305) 8.13 (.320) .203 (.008) Outline SMC Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR3F VOLTAGE CURRENT IR LOGO YYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" www.irf.com 5 30BQ040 Bulletin PD-2.439 rev. G 07/04 Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code 30 B Q 040 TR - 1 2 3 4 5 6 1 - Current Rating 2 - B = Single Lead Diode 3 - Q = Schottky Q Series 4 - Voltage Rating (040 = 40V) 5 - y none = Box (1000 pieces) y TR = Tape & Reel (3000 pieces) 6 y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/04 6 www.irf.com