www.amccaps.com
Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467
22
Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 (716) 372-5225 Fax (716) 372-5467
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN .100" TYP
.055" ± .010
.020" ± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
Mechanical characteristics
HigH TemperaTure STacked capaciTorS
Example Part number written: 101T23W106KJ4 =Rated 100 VDC@20C, 10uF± 10% X7R in T23 size.
how to order
VOLTAGE
Standard Voltages:
500 = 50 V
101 = 100 V
201 = 200 V
CASE SIZE
See Chart
DIELECTRIC
N = NPO
W = X7R
CAPACITANCE
1st two digits are
significant; third digit
denotes number of
zeros.
103 = .01 µF
104 = 0.1 µF
105 = 1.0 µF
106 = 10 µF
TOLERANCE
J = ± 5% *
K = ± 10%
M = ± 20%
* (NPO only)
LEAD STYLE
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
N = Straight Lead
MARKING
3 = Special Mark
4 = Standard Mark
6 = EIA 2-digit
SPECIAL CODE
S = Other Special
101 T23 106 K J 4 S
W
Key Features
• For Use at Temperatures Up to 200°C
• Rated Working Voltages from 50V to 200V
• Rugged Stack with Hi-Temp Lead-Attachment
• MLC Designs Utilizing Military Grade Ceramics
• Custom Sizes, Voltages, and Values Available
applications
For High Temperature Applications Such As:
- Oil Well Logging (Downhole)
- Geophysical Probes
- Jet Engine Controls
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN .100" TYP
.055" ± .010
.020" ± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
J-LeadStraight Lead L-Lead
Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467
www.amccaps.com
23
Case
Size
NPO Max Capacitance (µF) X7R Max Capacitance (µF)
50 V 100 V 200 V 50 V 100 V 200 V
T05 .056 .047 .022 1.20 0.68 0.33
T25 0.10 .082 .039 2.20 1.20 0.68
T35 0.15 0.12 .068 3.30 1.80 1.00
T45 0.22 0.18 .082 4.70 2.70 1.20
T55 0.27 0.22 0.10 5.60 3.30 1.50
T04 0.12 0.10 .047 2.70 1.50 0.82
T24 0.22 0.18 .082 4.70 2.70 1.50
T34 0.33 0.27 0.12 8.20 3.90 2.20
T44 0.47 0.39 0.18 12.0 5.60 3.30
T54 0.56 0.56 0.27 15.0 8.20 3.90
T03 0.47 0.39 0.22 10.0 5.60 2.70
T23 0.82 0.68 0.39 18.0 10.0 4.70
T33 1.20 1.00 0.68 27.0 15.0 8.20
T43 1.80 1.50 0.82 39.0 22.0 10.0
T53 2.20 1.80 1.00 47.0 27.0 12.0
capacitance / Voltage selection
Case
Size
A B C D D E F Leads
per side(max.”) (max”) ±.025 (min.”) (max.”) (max.”) (min.”)
T05 .120 .185
T25 .240 .305
T35 .360 .425 .250 .224 .275 .300 .080 3
T45 .480 .545
T55 .650 .715
T04 .120 .185
T24 .240 .305
T34 .360 .425 .400 .350 .425 .440 .180 4
T44 .480 .545
T54 .650 .715
T03 .120 .185
T23 .240 .305
T33 .360 .425 .450 .950 1.075 .500 .180 10
T43 .480 .545
T53 .650 .715
Mechanical characteristics
NPO DIELECTRIC X7R DIELECTRIC
TEMPERATURE COEFFICIENT: 0 ± 30 ppm, -55 to 12C 0 ± 15% ,-55 to 125°C
CAP DROP AT 200°C: minus 0.5% max minus 45% max
DISSIPATION FACTOR: .001 (0.1%) max, 1Khz, 25°C .025 (2.5%) max, 1KHz, 25°C
INSULATION RESISTANCE: 1000 Ohm-Farads or 100 Gigohms 1000 Ohm-Farads or 100 Gigohms
@25 °C whichever is less @ 25°C, WVDC whichever is less @ 2C, WVDC
INSULATION RESISTANCE: 1 Ohm-Farads or 100 Megohms 1 Ohm-Farads or 100 Megohms
@200 °C whichever is less @ 20C, WVDC whichever is less @ 200°C, WVDC
DIELECTRIC STRENGTh: 2.5 X WVDC, 2C, 50 mA max 2.5 X WVDC, 25°C, 50 mA max
TEST PARAMETERS: 1Khz ± 50Hz, 1.0±0.2 VRMS, 25°C 1Khz ± 50Hz, 1.0.2 VRMS, 25°C
dielectric characteristics