APEM www.apem.com B2-117
B2
4700 and 4800 series
Momentary or alternate action pushbutton switches
Distinctive features and specifications
APPROVALS
Models 4731A, 4736A, 4741A, 4746A are UL, CSA and
VDE (EN 61058-1
approved.
Models 4831A, 4836A, 4841A, 4846A are VDE (EN 61058-1) approved.
Marking : to order switches marked UL/CSA, complete appropriate box of ordering format. VDE is standard marked.
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- silver contacts (A) : 3A 250VAC - 6A 125VAC
- copper contacts (C) : 2A 250VAC - 4A 125VAC
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals
3.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
GENERAL SPECIFICATIONS
• Torque : 0,95 Nm (.70 Ft.lb) max. applied to nut
• Panel thickness : 5 mm (.196) max. between 2 nuts
• Total travel : 4,5 mm (.177) +/- 0,5 (.019)
• Operating temperature : -20°C to +65°C
• Hand soldering : 270°C max. for 10 seconds max. - Iron Ø 3 mm (.118)
MATERIALS
• Case : melamine-phenolic
• Plunger : polyamide
• Bushing : polyamide
• Contacts : A: silver
C: copper, silver plated
❑Butt action contacts
❑UL, CSA and VDE (EN 61058-1) approved
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 1 hex nut U166 and 1 knurled nut U520 in the same
colour as the plunger. They are presented in section I.
Packaging unit : single pole models : 40 pieces - Double pole models : 20 pieces.
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
EN 61058-1
The company reserves the right to change specifications without notice.
18-Serie 4700-4800-A_24-Serie 4700-4800-A 04/11/14 15:11 Page117