For technical questions, contact: powertron@vishaypg.com
MF2000 Series
Powertron
Document Number: 64313
Revision: 20-09-10
www.powertron.de
1
Type
Power
Rating
Watts @
70°C
Resis-
tance
Range
( W )
Maximum
Voltage H(MAX) D(MAX)
d
±0.002”
[±0.05mm]
L(MIN) W(MIN)
RN
Size
MFM2207 0.40 1 to 5M 300 ( See MFM2207 Drawing ) -
MF2207 0.40 1 to 10M 300 0.260
[6.5]
0.100
[2.5]
0.028
[0.7]
1.20
[30]
0.300
[7.5] RN55
MF2617 0.65 3 to 10M 500 0.600
[15.2]
0.230
[5.8]
0.032
[0.8]
1.20
[30]
0.690
[17.5] RN65
Resistances from 1 to 10MOhms•
Power Rating 0.4 to 0.65Watts•
Resistance Tolerances to ±0.05%•
TCR’s to ±3ppm/K•
Very Low Inductance•
Matched Sets Available•
E192 Values in Stock•
SPECIFICATIONS
Specication Value
Resistance Range 1 Ohms to 10MOhms
Tolerances ±0.05% to ±1%
Temperature Coefcient ( See Charts )
Temperature Range -25°C to +125°C ( TC >= 25ppm/K )
-10°C to +85°C ( TC < 25ppm/K )
Insulation Resistance >10000 MOhms
Climatic Category 55/125/56
Max Soldering Temperature +260°C / 10s
Voltage Coefcient < 5ppm/V
MFM2207
For technical questions, contact: powertron@vishaypg.com
MF2000 Series
Powertron
Document Number: 64313
Revision: 20-09-10
www.powertron.de
2
SPECIFICATIONS (continued)
Part Number - Resistance - Tolerance - TCR
Example: MF2207 1.1 kOhm 0.05% 5ppm
( Note: If no TCR is specied / the highest value will be supplied )
TCR
( ± ppm/K )
Resistances Available at These Tolerances
±0.05% ±0.1% ±0.25% ±0.5% ±1%
5 50 - 250K 10 - 500K 10 - 500K 10 - 500K -
10 50 - 510K 5 - 1M 5 - 1M 5 - 1M -
15 50 - 510K 5 - 1.5M 5 - 1.5M 5 - 2M 1 - 2M
25 50 - 510K 5 - 1.5M 5 - 3M 2 - 5M 1 - 5M
50 50 - 510K 5 - 2M 3 - 3M 2 - 5M 1 - 5M
0 25 50 75 100 125 150 175 200
0
20
40
60
80
100
120
Power ( % )
Ambient Temperature (°C)
Power Derating Curve
TCR
( ± ppm/K )
Resistances Available at These Tolerances
±0.05% ±0.1% ±0.25% ±0.5% ±1%
3 50 - 120K 30 - 200K 30 - 200K 30 - 200K -
5 50 - 250K 10 - 500K 10 - 500K 10 - 500K -
10 50 - 510K 5 - 1M 50 - 1M 50 - 1M -
15 50 - 510K 5 - 1.5M 5 - 2M 5 - 2M 1 - 2M
25 50 - 510K 5 - 3M 2 - 3M 2 - 5M 1 - 5M
50 50 - 510K 5 - 3M 2 - 3M 2 - 10M 1 - 10M
TCR
( ± ppm/K )
Resistances Available at These Tolerances
±0.05% ±0.1% ±0.25% ±0.5% ±1%
10 240 - 250K 100 - 250K 50 - 250K 20 - 510K 20 - 510K
15 240 - 250K 100 - 250K 50 - 250K 20 - 510K 20 - 510K
25 240 - 510K 100 - 1M 50 - 2M 20 - 5M 10 - 5M
50 100 - 510K 50 - 10M 10 - 10M 5 - 10M 3 - 10M
MFM2207 TCR / Tolerance / Resistance Chart
MF2207 TCR / Tolerance / Resistance Chart
MF2617 TCR / Tolerance / Resistance Chart
Ordering Information
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11