CC-E Series Ultra Compact, 1.5W to 25W Single and Dual DC-DC Converters Compact Footprint / Low Profile Through Hole or SMT Versions 5V, 12V, 24V & 48V Inputs 3.3 to 30V1 Single, 12 to 15V Dual Outputs Output Voltage Adjustment Input - Output Isolation RoHS Compliant 5 Year Warranty Key Market Segments & Applications Telecommunications Instrumentation Features & Benefits Feature Datacom Benefit Compact Self contained Multiple Input Voltage configurations Open frame (no potting) Less pcb area used Requires no external components Easier system configuration Lighter in weight, suitable for surface mount (R version) Specifications Nominal Output Voltage DC Input Efficiency Output Voltage Tolerance Output Adjustment (via trim pin) Line Regulation Load Regulation Temperature Coefficient Preload Output Ripple (typ./max.BW 50MHz) Overcurrent Protection Overvoltage Protection Remote On/ Off V V % % V mV mV % mV - Operating Temp.- Convection Operating Temp.- Forced Air Storage Temperature Humidity (non Condensing) Isolation Voltage Isolation Resistance Shock Vibration (non Operating) Safety Agency Approvals Weight Size (L x W x H) (DIP Through Hole and SMD package) (SIP Through Hole only) Warranty C C C m/s2 g in 1. 2. - 3.3V 5V 12/15V 12/15 (24/30)1 5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V 71 to 90% model dependant 1.5-10W: 3%, 15-25W: 5% 5% 3.15-3.6V 4.75-6.0V 11.4-15V 22.8 - 30V 20 (40 CC15; 30 CC25) 40 80 40 (120 CC15; 200 CC25) 100 6002 < 0.02%/C No preload required 40/120 30/120 Output current limiting with automatic recovery, shutdown CC15, 25 type No CC1R5, 3, 6, & 10: RC terminal open, output is OFF; RC terminal to -Vin (0-0.4V), output is ON CC15 & CC25: RC terminal open, output is ON; RC terminal to +Vin, output is OFF -40 to 85C, derates linearly to 40% load from 50C to 85C -40C to 85C with 1m/s air full load -40C to 85C 95% RH max.(maximum wet-bulb temperature: 38C) 500VAC 1 min. Input to output, input to case, output to case Input to output, input to case, output to case: 50M ohm min. (500VDC) 980m/s2 (100G) 6ms (6 directions, each 3 times) 10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours UL60950-1, CSA60950-1, EN60950-1, CE Mark CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0, CC15: 12.5, CC25: 20.0 CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335 CC10: 1.400 x 0.890 x 0.335; CC15: 1.500 x 1.264 x 0.295; CC25: 1.701 x 1.768 x 0.295 CC3 (SIP): 1.09 x 0.362 x 0.705 5 years For 24V/30V output - connnect across +Vout & -Vout and leave "common out" pin not connected Based upon equal load current from both outputs 3. 4. For 15V output connect trim to -Vout See Installation Manual for full specifications, test methods of parameters and application notes 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 115 CC-E Series Model Selector Output Voltage (V) Single Outputs 3.3 3.3 3.3 3.3 3.3 3.3 5 5 5 5 5 5 5 12(15) 12(15) 12(15) 12(15) 12(15) Dual Outputs 12 (15)3 12 (15)3 12 (15)3 12 (15)3 12 (15)3 Output Current (A) Output Power (W) 0.4 0.8 1.2 2.5 4.5 7.5 0.3 0.6 1.0 1.2 2.0 3.0 5.0 0.125(0.1) 0.25(0.2) 0.5(0.4) 0.8(0.64) 1.0(0.8) 0.06(0.05) 0.125(0.1) 0.25(0.2) 0.4(0.32) 0.45(0.36) 5V Input 12V Input 24V Input 48V Input 1.5 3 6 10 15 25 1.5 3 5 6 10 15 25 1.5 3 6 10 10 CC1R5-0503SF-E CC3-0503SF-E CC6-0503SF-E CC10-0503SF-E CC1R5-0505SF-E CC3-0505SF-E CC6-0505SF-E CC10-0505SF-E CC1R5-0512SF-E CC3-0512SF-E CC6-0512SF-E CC10-0512SF-E - CC1R5-1203SF-E CC3-1203SF-E CC6-1203SF-E CC10-1203SF-E CC1R5-1205SF-E CC3-1205SF-E CC6-1205SF-E CC10-1205SF-E CC1R5-1212SF-E CC3-1212SF-E CC6-1212SF-E CC10-1212SF-E CC1R5-2403SF-E CC3-2403SF-E CC6-2403SF-E CC10-2403SF-E CC15-2403SF-E CC25-2403SF-E CC1R5-2405SF-E CC3-2405SF-E CC6-2405SF-E CC10-2405SF-E CC15-2405SF-E CC25-2405SF-E CC1R5-2412SF-E CC3-2412SF-E CC6-2412SF-E CC10-2412SF-E CC1R5-4803SF-E CC3-4803SF-E CC6-4803SF-E CC10-4803SF-E CC1R5-4805SF-E CC3-4805SF-E CC6-4805SF-E CC10-4805SF-E CC1R5-4812SF-E CC3-4812SF-E CC6-4812SF-E CC10-4812SF-E 1.5 3 6 10 10 CC1R5-0512DF-E CC3-0512DF-E CC6-0512DF-E CC10-0512DF-E - CC1R5-1212DF-E CC3-1212DF-E CC6-1212DF-E CC10-1212DF-E CC1R5-2412DF-E CC3-2412DF-E CC6-2412DF-E CC10-2412DF-E CC1R5-4812DF-E CC3-4812DF-E CC6-4812DF-E CC10-4812DF-E CC10- F-E (DIP TYPE) CC10- R-E (SMD TYPE) 8.5 (8.8max.) Outline Drawing 4.0 22.60.2 22.60.2 4.0 8.4 (8.5max.) Outline Drawing t=0.3 3.5 t=0.3 35.56 25.4 5 6 7-0.3 0.6 10 9 7 5.08 (3.68) 0.5 4 1.0 Options Version Description F-E R-E S-E Through hole mounting (DIP pkg) Surface mount (DIP pkg) Through hole mounting (SIP pkg - CC3) Other Lambda Industrial Products PX 10 - 40W 12, 24, 48V DC-DC converters PAQ, 50 -700W quarter, half & full bricks PAH, PAF 1.8 3 4 2 5 7-0.3 0.6 1 6 7 5.08 5.08 5.08 (3.68) 10.16 No.10, 11 2.7 11 2 1 2.7 (3.68) 10.16 5.08 1.8 3.5 8 No.8, 9 5.08 5.08 5.08 5.08 (3.68) 3 25.4 0.5 35.56 5.08 Coplanarity 0.1max. 38.86 P i n o u t (CC1R5, 3, 6, and 10) Pin Single Dual 1 2 3 4 5 6 7 +Vin RC -Vin NC -Vout TRM +Vout +Vin RC -Vin -Vout Common out TRM +Vout For CC15 and 25 see Installation Manual online For Additional Information, please visit us.tdk-lambda.com/lp/products/cc-series.htm 116 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 Revision A5: Jan 2010