cui.com
date 05/22/2017
page 1 of 5
SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR
FEATURES
• strain relief
• 3~13 pins
• 100 Vac rated
RoHS
SD - XX
Base Number
PART NUMBER KEY
SPECIFICATIONS
parameter conditions/description min typ max units
rated input voltage 100
12
Vac
Vdc
rated input current at 100 Vac
at 12 Vdc
1
2
A
A
contact resistance 30 mΩ
insulation resistance at 500 Vdc 100 MΩ
voltage withstand for 1 minute 1,000 Vac
insertion force 4 kg
withdrawal force 1 3.5 kg
operating temperature 5 70 °C
life 5,000 cycles
RoHS 2011/65/EU
Pin Options
30 = 3 pins
40 = 4 pins
50 = 5 pins, 180 degrees
51 = 5 pins, 240 degrees
60 = 6 pins
70 = 7 pins
80 = 8 pins, 270 degrees
81 = 8 pins, 262 degrees
130 = 13 pins
For more information, please visit the product page.
cui.com
date 05/22/2017 │ page 2 of 5CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR
0.70.028
45°
2.0 0.079 9.00.354 50.61.992
0.2 6.50.256
0.15
0.059
1.5
(TYP)
0.62215.8
13.10.516
0.15
MECHANICAL DRAWINGS
units: mm[inches]
tolerance: ±0.1 mm MATERIAL PLATING
contact pins (30~80) brass nickel
contact pins (81, 130) brass silver
shell steel nickel
insulator (30~80, 130) PBT
insulator (81) ABS
boot EVA
60°
45°
60°
72° 90°
45°
0.7
SD-30 SD-50 SD-51
SD-60 SD-70 SD-80
SD-40
For more information, please visit the product page.
cui.com
date 05/22/2017 │ page 3 of 5CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR
45°
0.90.035
2.00 0.079
41°
6.50.256
0.3
0.059
(8 PLCS)
1.5
16.0
0.3
0.630
13.20.520
8.30.327 59.02.323
1.0
8.8 0.35 50.11.97
9.20.36
15.9 0.63
13.2 0.52
2.5
0.10
4.5
2.5 0.10
0.307.5
0.10
2.5
0.18
0.780.03
0.02
(13 PLCS)
units: mm[inches]
tolerance: ±0.1 mm
SD-81
SD-130
For more information, please visit the product page.
cui.com
date 05/22/2017 │ page 4 of 5CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR
PIN DETAILS
2
1
covermetal shieldhousing
3
2
2
3
1
MECHANICAL ASSEMBLY
21
STEP 1
solder wires to
housing (3),
assemble metal
shield pieces (2
)
onto housing (3
)
STEP 2
slide cover (1)
over metal shield (2)
2
2
3
Note: SD-130 has solid solder pins.
All other models have solder cups.
For more information, please visit the product page.
date 05/22/2017 │ page 5 of 5CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR
CUI oers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to aect its safety or eectiveness.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
techsupport@cui.com
rev. description date
1.0 initial release 02/23/2006
1.01 new template applied 02/15/2012
1.02 updated housings 04/12/2012
1.03 corrected center pin positioning on SD-80 09/13/2013
1.04 updated datasheet 05/22/2017
The revision history provided is for informational purposes only and is believed to be accurate.
REVISION HISTORY
For more information, please visit the product page.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CUI Inc.:
SD-70BV SD-70LS SD-60J SD-80LP SD-30BV SD-50J SD-70 SD-40LP SD-50LS SD-60LP SD-40J SD-50
SD-30 SD-60LS SD-130 SD-80 SD-30LP SD-70LP SD-30LS SD-60BV SD-60 SD-40LS SD-80LS SD-80BV
SD-40