ICTE5.0 thru ICTE18C, 1N6373 thru 1N6386 Vishay General Semiconductor TRANSZORB(R) Transient Voltage Suppressors FEATURES * Glass passivated chip junction * Available in uni-directional and bi-directional * 1500 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Case Style 1.5KE TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. PRIMARY CHARACTERISTICS VWM 5.0 V to 18 V PPPM 1500 W PD 6.5 W IFSM 200 A TJ max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use C suffix (e.g. ICTE-18C). Electrical characteristics apply in both directions. MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC-Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Peak pulse power dissipation with a 10/1000 s waveform (1) (Fig. 1) Peak pulse current with a 10/1000 s waveform (1) (Fig. 3) Power dissipation on infinite heatsink at TL = 75 C (Fig. 8) Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) Maximum instantaneous forward voltage at 100 A for uni-directional only Operating junction and storage temperature range LIMIT UNIT PPPM 1500 W IPPM See next table A PD 6.5 W IFSM 200 A VF 3.5 V TJ, TSTG - 55 to + 175 C Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2 (2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum Document Number: 88356 Revision: 12-Feb-09 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 ICTE5.0 thru ICTE18C, 1N6373 thru 1N6386 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (JEDEC REGISTERED DATA) (TA = 25 C unless otherwise noted) JEDEC TYPE NUMBER GENERAL SEMICONDUCTOR PART NUMBER STAND-OFF VOLTAGE VWM (V) MINIMUM BREAKDOWN VOLTAGE AT 1.0 mA VBR (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (A) MAXIMUM CLAMPING VOLTAGE AT IPP = 1.0 A VC (V) MAXIMUM CLAMPING VOLTAGE AT IPP = 10 A VC (V) MAXIMUM PEAK PULSE CURRENT IPP (A) 5.0 6.0 300 7.1 7.5 160 UNI-DIRECTIONAL TYPES 1N6373 (2) ICTE-5 (2) 1N6374 ICTE-8 8.0 9.4 25.0 11.3 11.5 100 1N6375 ICTE-10 10.0 11.7 2.0 13.7 14.1 90 1N6376 ICTE-12 12.0 14.1 2.0 16.1 16.5 70 1N6377 ICTE-15 15.0 17.6 2.0 20.1 20.6 60 1N6378 ICTE-18 18.0 21.2 2.0 24.2 25.2 50 BI-DIRECTIONAL TYPES 1N6382 ICTE-8C 8.0 9.4 50.0 11.4 11.6 100 1N6383 ICTE-10C 10.0 11.7 2.0 14.1 14.5 90 1N6384 ICTE-12C 12.0 14.1 2.0 16.7 17.1 70 1N6385 ICTE-15C 15.0 17.6 2.0 20.8 21.4 60 1N6386 ICTE-18C 18.0 21.2 2.0 24.8 25.5 50 Notes: (1) "C" Suffix indicates bi-directional (2) ICTE-5 and 1N6373 are not available as bi-directional (3) Clamping factor: 1.33 at full rated power; 1.20 at 50 % rated power; Clamping factor: the ratio of the actual VC (Clamping Voltage) to the VBR (Breakdown Voltage) as measured on a specific device ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ICTE-5-E3/54 0.968 54 1400 13" diameter paper tape and reel ICTE-5HE3/54 (1) 0.968 54 1400 13" diameter paper tape and reel Note: (1) Automotive grade AEC-Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88356 Revision: 12-Feb-09 ICTE5.0 thru ICTE18C, 1N6373 thru 1N6386 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 000 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 C CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 100 10 1 Measured at Zero Bias 10 000 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p Measured at Stand-Off Voltage VWM 1000 0.1 1.0 s 10 s 100 s 1.0 ms 100 10 ms 10 1.0 100 VBR - Breakdown Voltage (V) Figure 1. Peak Pulse Power Rating Curve Figure 4. Typical Junction Capacitance Uni-Directional 100 000 100 75 50 25 Measured at Zero Bias Bi-Directional Type Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 C 10 000 1000 Measured at Stand-Off Voltage VWM 100 0 0 25 50 75 100 125 150 175 1.0 200 10 100 TJ - Initial Temperature (C) VBR - Breakdown Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 5. Typical Junction Capacitance 150 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 s Peak Value IPPM 100 IFSM - Peak Forward Surge Current (A) IPPM - Peak Pulse Current, % IRSM 200 td - Pulse Width (s) CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 0.1 s Half Value - IPP IPPM 2 50 10/1000 s Waveform as defined by R.E.A. td 0 200 200 TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 50 10 0 1.0 2.0 3.0 4.0 1 5 10 50 100 t - Time (ms) Number of Cycles at 60 Hz Figure 3. Pulse Waveform Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Document Number: 88356 Revision: 12-Feb-09 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 ICTE5.0 thru ICTE18C, 1N6373 thru 1N6386 Vishay General Semiconductor 8.0 Uni-Directional Only TA = 25 C PD - Power Dissipation (W) 7.0 ICTE-18 ICTE-15 ICTE-12 ICTE-10 ICTE-8 10 ICTE-5 IPP - Peak Pulse Current (A) 50 6.0 5.0 4.0 3.0 L = 0.375" (9.5 mm) Lead Lengths 2.0 1.0 1 0 6 8 10 12 14 16 18 20 22 24 26 28 0 25 50 75 100 125 150 175 VC - Clamping Voltage (V) TL - Lead Temperature (C) Figure 7. Typical Characteristics Clamping Voltage Figure 8. Power Derating Curve 200 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style 1.5KE 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.038 (0.96) DIA. www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88356 Revision: 12-Feb-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1