Product Folder Sample & Buy Technical Documents Support & Community Tools & Software TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 TLV1117 Adjustable and Fixed Low-Dropout Voltage Regulator 1 Features 3 Description * The TLV1117 device is a positive low-dropout voltage regulator designed to provide up to 800 mA of output current. The device is available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V, and adjustable-output voltage options. All internal circuitry is designed to operate down to 1-V input-to-output differential. Dropout voltage is specified at a maximum of 1.3 V at 800 mA, decreasing at lower load currents. 1 * * * * 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V, and Adjustable-Output Voltage Options Output Current of 800 mA Specified Dropout Voltage at Multiple Current Levels 0.2% Line Regulation Maximum 0.4% Load Regulation Maximum Device Information 2 Applications * * * * * ORDER NUMBER Electronic Points of Sale Medical, Health, and Fitness Applications Printers Appliances and White Goods TV Set-Top Boxes PACKAGE (PIN) BODY SIZE TLV1117DCY SOT-223 (4) 6.50 mm x 3.50 mm TLV1117DRJ SON (8) 4.00 mm x 4.00 mm TLV1117KVU TO-252 (3) 6.60 mm x 6.10 mm TLV1117KCS TO-220 (3) 10.16 mm x 8.70 mm TLV1117KCT TO-220 (3) 10.16 mm x 8.59 mm TLV1117KTT DDPAK, TO-263 (3) 10.18 mm x 8.41 mm 4 Simplified Schematic TLV1117-ADJ INPUT OUTPUT ADJ/GND 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com Table of Contents 1 2 3 4 5 6 7 8 Features .................................................................. Applications ........................................................... Description ............................................................. Simplified Schematic............................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 1 1 1 1 2 3 4 7.1 7.2 7.3 7.4 7.5 7.6 7.7 4 4 4 5 6 7 8 Absolute Maximum Ratings ..................................... Handling Ratings ...................................................... Recommended Operating Conditions....................... Thermal Information .................................................. TLV1117C Electrical Characteristics ........................ TLV1117I Electrical Characteristics .......................... Typical Characteristics .............................................. Detailed Description ............................................ 10 8.1 8.2 8.3 8.4 9 Overview ................................................................. Functional Block Diagram ....................................... Feature Description................................................. Device Functional Modes........................................ 10 10 10 10 Application and Implementation ........................ 12 9.1 Typical Application ................................................. 12 10 Power Supply Recommendations ..................... 13 11 Layout................................................................... 13 11.1 Layout Guidelines ................................................. 13 11.2 Layout Example .................................................... 13 12 Device and Documentation Support ................. 14 12.1 Trademarks ........................................................... 14 12.2 Electrostatic Discharge Caution ............................ 14 12.3 Glossary ................................................................ 14 13 Mechanical, Packaging, and Orderable Information ........................................................... 14 Changes from Revision K (April 2013) to Revision L Page * Updated data sheet to new TI standards - no specification changes. .................................................................................. 1 * Deleted Ordering Information table. ...................................................................................................................................... 1 * Added Applications. ................................................................................................................................................................ 1 * Added Device and Documentation Support section............................................................................................................. 14 * Added Mechanical, Packaging, and Orderable Information section..................................................................................... 14 5 Revision History Changes from Revision J (April 2013) to Revision K Page * Added additional package options.......................................................................................................................................... 3 * Added ESD warning. ............................................................................................................................................................ 14 2 Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 TLV1117 www.ti.com SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 6 Pin Configuration and Functions KVU (TO-252) PACKAGE (TOP VIEW) INPUT 2 OUTPUT 1 ADJ/GND DCY (SOT-223) PACKAGE (TOP VIEW) OUTPUT 3 2 ADJ/GND 1 VIN(1) 2 (1) VIN(1) OUTPUT VIN 1 ADJ/GND 8 NC 7 VOUT(2) 3 6 VOUT(2) 4 5 VOUT(2) VOUT INPUT 2 OUTPUT 1 ADJ/GND KCT, KCS (TO-220) PACKAGE (TOP VIEW) DRJ (QFN) PACKAGE (TOP VIEW) INPUT 3 OUTPUT 3 OUTPUT OUTPUT KTT (TO-263) PACKAGE (TOP VIEW) 3 2 1 INPUT OUTPUT ADJ/GND (1) VIN pins (2, 3, 4) must be connected together. (2) VOUT pins (5, 6, 7) must be connected together. Table 1. Pin Functions PIN NAME KTT KVU DCY DRJ KCT TYPE DESCRIPTION ADJ/GND 1 1 1 1 1 I/O INPUT 3 3 3 2, 3, 4 3 I Output voltage adjustment pin. Connect to a resistor divider. Voltage input OUTPUT 2 2 2 5, 6, 7 2 O Voltage output NC - - - 8 - - No connect Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 3 TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com 7 Specifications 7.1 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN VIN Continuous input voltage TJ Operating virtual-junction temperature (1) MAX UNIT 16 V 150 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 7.2 Handling Ratings Tstg Storage temperature range V(ESD) (1) (2) Electrostatic discharge MIN MAX UNIT C -65 150 Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins (1) 0 2500 Charged device model (CDM), per JEDEC specification JESD22-C101, all pins (2) 0 1500 V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 7.3 Recommended Operating Conditions VIN Input voltage IO Output current TJ Operating virtual-junction temperature (1) 4 MIN (1) MAX TLV1117 2.7 15 TLV1117-15 2.9 15 TLV1117-18 3.2 15 TLV1117-25 3.9 15 TLV1117-33 4.7 15 TLV1117-50 6.4 TLV1117I V 15 0.8 TLV1117C UNIT 0 125 -40 125 A C The input-to-output differential across the regulator should provide for some margin against regulator operation at the maximum dropout (for a particular current value). This margin is needed to account for tolerances in both the input voltage (lower limit) and the output voltage (upper limit). The absolute minimum VIN for a desired maximum output current can be calculated by the following: VIN(min) = VOUT(max) + VDO(max at rated current) Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 TLV1117 www.ti.com SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 7.4 Thermal Information TLV1117 THERMAL METRIC (1) (2) (3) PowerFlex UNITS KTE (3 PINS) KTP (3 PINS) DRJ (8 PINS) DCY (4 PINS) KVU (3 PINS) KCS, KCT (3 PINS) KTT (3 PINS) RJA Junction-to-ambient thermal resistance 38.6 49.2 38.3 104.3 50.9 30.1 27.5 RJC(top) Junction-to-case (top) thermal resistance 34.7 60.6 36.5 53.7 57.9 44.6 43.2 RJB Junction-to-board thermal resistance 3.2 3.1 60.5 5.7 34.8 1.2 17.3 JT Junction-to-top characterization parameter 5.9 8.7 0.2 3.1 6 5 2.8 JB Junction-to-board characterization parameter 3.1 3 12 5.5 23.7 1.2 9.3 RJC(bot) Junction-to-case (bottom) thermal resistance 3 3 4.7 n/a 0.4 0.4 0.3 RJP Thermal resistance between the die junction and the bottom of the exposed pad. 2.7 1.4 1.78 n/a n/a 3 1.94 (1) (2) (3) C/W For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. For thermal estimates of this device based on PCB copper area, see the TI PCB Thermal Calculator. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA) / JA. Operating at the absolute maximum TJ of 150C can affect reliability. Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 5 TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com 7.5 TLV1117C Electrical Characteristics TJ = 0C to 125C, all typical values are at TJ = 25C (unless otherwise noted) TEST CONDITIONS (1) PARAMETER Reference voltage, VREF VIN - VOUT = 2 V, IOUT = 10 mA, TJ = 25C VIN - VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA VIN = 3.5 V, IOUT = 10 mA, TJ = 25C VIN = 2.9 V to 10 V, IOUT = 0 to 800 mA VIN = 3.8 V, IOUT = 10 mA, TJ = 25C VIN = 3.2 V to 10 V, IOUT = 0 to 800 mA VIN = 4.5 V, IOUT = 10 mA, TJ = 25C Output voltage, VOUT VIN = 3.9 V to 10 V, IOUT = 0 to 800 mA VIN = 5 V, IOUT = 10 mA, TJ = 25C VIN = 4.75 V to 10 V, IOUT = 0 to 800 mA VIN = 7 V, IOUT = 10 mA, TJ = 25C VIN = 6.5 V to 12 V, IOUT = 0 to 800 mA Line regulation Load regulation Dropout voltage, VDO (2) TLV1117 TLV1117-15 TLV1117-18 TLV1117-25 TLV1117-33 TLV1117-50 MIN TYP MAX 1.238 1.25 1.262 1.225 1.25 1.27 1.485 1.5 1.515 1.455 1.5 1.545 1.782 1.8 1.818 1.746 1.8 1.854 2.475 2.5 2.525 2.450 2.5 2.550 3.267 3.3 3.333 3.235 3.3 3.365 4.950 5.0 5.050 4.900 5.0 5.100 0.035% 0.2% IOUT = 10 mA, VIN - VOUT = 1.5 V to 13.75 V TLV1117 IOUT = 0 mA, VIN = 2.9 V to 10 V TLV1117-15 1 6 IOUT = 0 mA, VIN = 3.2 V to 10 V TLV1117-18 1 6 IOUT = 0 mA, VIN = 3.9 V to 10 V TLV1117-25 1 6 IOUT = 0 mA, VIN = 4.75 V to 15 V TLV1117-33 1 6 IOUT = 0 mA, VIN = 6.5 V to 15 V TLV1117-50 IOUT = 10 mA to 800 mA, VIN - VOUT = 3 V TLV1117 IOUT = 0 to 800 mA, VIN = 2.9 V 1 10 0.2% 0.4% TLV1117-15 1 10 IOUT = 0 to 800 mA, VIN = 3.2 V TLV1117-18 1 10 IOUT = 0 to 800 mA, VIN = 3.9 V TLV1117-25 1 10 IOUT = 0 to 800 mA, VIN = 4.75 V TLV1117-33 1 10 IOUT = 0 to 800 mA, VIN = 6.5 V TLV1117-50 1 15 UNIT V -- mV -- mV IOUT = 100 mA 1.1 1.2 IOUT = 500 mA 1.15 1.25 IOUT = 800 mA 1.2 1.3 1.2 1.6 1.7 5 mA 5 10 mA 0.01 0.1 %/W 80 120 A 0.2 5 A Current limit VIN - VOUT = 5 V, TJ = 25C (3) Minimum load current VIN = 15 V TLV1117 Quiescent current VIN 15 V All fixed-voltage options Thermal regulation 30-ms pulse, TA = 25C Ripple rejection VIN - VOUT = 3 V, Vripple = 1 Vpp, f = 120 Hz ADJ pin current 0.8 60 75 V A dB Change in ADJ pin current VIN - VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA Temperature stability TJ = full range 0.5% -- Long-term stability 1000 hrs, No load, TA = 125C 0.3% -- Output noise voltage (% of VOUT) f = 10 Hz to 100 kHz 0.003% -- (1) (2) (3) 6 All characteristics are measured with a 10-F capacitor across the input and a 10-F capacitor across the output. Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Dropout is defined as the VIN to VOUT differential at which VOUT drops 100 mV below the value of VOUT, measured at VIN = VOUT(nom) + 1.5 V. Current limit test specified under recommended operating conditions. Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 TLV1117 www.ti.com SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 7.6 TLV1117I Electrical Characteristics TJ = -40C to 125C, all typical values are at TJ = 25C (unless otherwise noted) TEST CONDITIONS (1) PARAMETER Reference voltage, VREF VIN - VOUT = 2 V, IOUT = 10 mA, TJ = 25C VIN - VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA VIN = 3.5 V, IOUT = 10 mA, TJ = 25C VIN = 2.9 V to 10 V, IOUT = 0 to 800 mA VIN = 3.8 V, IOUT = 10 mA, TJ = 25C VIN = 3.2 V to 10 V, IOUT = 0 to 800 mA VIN = 4.5 V, IOUT = 10 mA, TJ = 25C Output voltage, VOUT VIN = 3.9 V to 10 V, IOUT = 0 to 800 mA VIN = 5 V, IOUT = 10 mA, TJ = 25C VIN = 4.75 V to 10 V, IOUT = 0 to 800 mA VIN = 7 V, IOUT = 10 mA, TJ = 25C VIN = 6.5 V to 12 V, IOUT = 0 to 800 mA Line regulation Load regulation Dropout voltage, VDO (2) TLV1117 TLV1117-15 TLV1117-18 TLV1117-25 TLV1117-33 TLV1117-50 MIN TYP MAX 1.238 1.25 1.262 1.200 1.25 1.29 1.485 1.5 1.515 1.44 1.5 1.56 1.782 1.8 1.818 1.728 1.8 1.872 2.475 2.5 2.525 2.4 2.5 2.6 3.267 3.3 3.333 3.168 3.3 3.432 4.95 5.0 5.05 4.80 5.0 5.20 0.035% 0.3% IOUT = 10 mA, VIN - VOUT = 1.5 V to 13.75 V TLV1117 IOUT = 0 mA, VIN = 2.9 V to 10 V TLV1117-15 1 10 IOUT = 0 mA, VIN = 3.2 V to 10 V TLV1117-18 1 10 IOUT = 0 mA, VIN = 3.9 V to 10 V TLV1117-25 1 10 IOUT = 0 mA, VIN = 4.75 V to 15 V TLV1117-33 1 10 IOUT = 0 mA, VIN = 6.5 V to 15 V TLV1117-50 IOUT = 10 mA to 800 mA, VIN - VOUT = 3 V TLV1117 IOUT = 0 to 800 mA, VIN = 2.9 V 1 15 0.2% 0.5% TLV1117-15 1 15 IOUT = 0 to 800 mA, VIN = 3.2 V TLV1117-18 1 15 IOUT = 0 to 800 mA, VIN = 3.9 V TLV1117-25 1 15 IOUT = 0 to 800 mA, VIN = 4.75 V TLV1117-33 1 15 IOUT = 0 to 800 mA, VIN = 6.5 V TLV1117-50 1 20 UNIT V -- mV -- mV IOUT = 100 mA 1.1 1.3 IOUT = 500 mA 1.15 1.35 IOUT = 800 mA 1.2 1.4 1.2 1.6 1.7 5 mA 5 15 mA 0.01 0.1 %/W 80 120 A 0.2 10 A Current limit VIN - VOUT = 5 V, TJ = 25C (3) Minimum load current VIN = 15 V TLV1117 Quiescent current VIN 15 V All fixed-voltage options Thermal regulation 30-ms pulse, TA = 25C Ripple rejection VIN - VOUT = 3 V, Vripple = 1 Vpp, f = 120 Hz 0.8 ADJ pin current 60 75 V A dB Change in ADJ pin current VIN - VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA Temperature stability TJ = full range 0.5% -- Long-term stability 1000 hrs, No load, TA = 125C 0.3% -- Output noise voltage (% of VOUT) f = 10 Hz to 100 kHz 0.003% -- (1) (2) (3) All characteristics are measured with a 10-F capacitor across the input and a 10-F capacitor across the output. Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Dropout is defined as the VIN to VOUT differential at which VOUT drops 100 mV below the value of VOUT, measured at VIN = VOUT(nom) + 1.5 V. Current limit test specified under recommended operating conditions Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 7 TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com 7.7 Typical Characteristics 0 1.8 TJ = 255C DLoad = 800 mA 1.6 -0.05 Short-Circuit Current (A) 1.4 TJ = 1255C -0.1 DVOUT (%) 1.2 1 0.8 -0.15 -0.2 0.6 -0.25 0.4 -0.3 0.2 0 0 3 6 9 12 -0.35 -50 15 -25 0 Input/Output Differential (V) Figure 1. Short-Circuit Current vs (VIN - VOUT) 90 70 80 100 125 f = 120 Hz Ripple Rejection (dB) Ripple Rejection (dB) 75 70 50 40 30 20 60 50 40 30 20 10 10 0 0 10 100 1k 10k 100k 0 200 Frequency (Hz) 600 800 Figure 4. Ripple Rejection vs Load Current (ADJ Version) 2 150 1.5 140 130 ADJ Pin Current (mA) 1 0.5 0 -0.5 -1 120 110 100 90 80 -1.5 -2 -50 400 Load (mA) Figure 3. Ripple Rejection vs Frequency (ADJ Version) Output Voltage Variation (%) 50 Figure 2. Load Regulation 80 60 8 25 Temperature (5C) 70 -25 0 25 50 75 100 125 150 60 -50 -25 0 25 50 75 100 125 150 Temperature (5C) Temperature (5C) Figure 5. Temperature Stability Figure 6. ADJ Pin Current vs Temperature Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 TLV1117 www.ti.com SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 Typical Characteristics (continued) 100 2.4 90 2.2 Output-Voltage Deviation 1.6 1.4 -0.1 CIN = 10 mF COUT = 10-mF Tantalum -0.2 VIN = 4.8 V Preload = 0.1 A 1.2 1 0.8 0.6 -0.3 0.4 Load Current 0.2 -0.4 -0.5 -60 Load Current (A) 1.8 0 -40 -20 0 7 Input Voltage 6 80 2 Output Voltage Deviation (mV) 0.1 Output Voltage Deviation (V) 2.6 70 5 60 50 40 30 CIN = 0.1 mF COUT = 10-mF Tantalum IOUT = 0.1 A 3 20 Output-Voltage Deviation 10 2 0 0 -10 -0.2 -20 -40 -20 20 4 Input Voltage (V) 0.2 Time (ms) 1 0 20 40 60 80 100 120 140 Time (ms) Figure 7. TLV1117-33 Load Transient Response Figure 8. TLV1117-33 Line Transient Response Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 9 TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com 8 Detailed Description 8.1 Overview The TLV1117 device is a positive low-dropout voltage regulator designed to provide up to 800 mA of output current. The device is available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V, and adjustable-output voltage options. All internal circuitry is designed to operate down to 1-V input-to-output differential. Dropout voltage is specified at a maximum of 1.3 V at 800 mA, decreasing at lower load currents. The TLV1117 device is designed to be stable with tantalum and aluminum electrolytic output capacitors having an ESR between 0.2 and 10 . Unlike pnp-type regulators, in which up to 10% of the output current is wasted as quiescent current, the quiescent current of the TLV1117 device flows into the load, increasing efficiency. The TLV1117C device is characterized for operation over the virtual junction temperature range of 0C to 125C, and the TLV1117I device is characterized for operation over the virtual junction temperature range of -40C to 125C. 8.2 Functional Block Diagram Functional Block Diagram 80 !A + 1.25 V Overload Block INPUT 5 mA OUTPUT ADJUST 8.3 Feature Description 8.3.1 NPN Output Drive NPN output topology provides lower output impedance than most LDOs. However, an output capacitor is required. To support maximum current and lowest temperature, 1.4-V headroom is recommended (less for lower currents) (VI - VO). 8.3.2 Overload Block Current limiting and over temperature shutdown protects against overload or under heat sinking. 8.3.3 Programmable Feedback Op amp with 1.25-V offset input at the ADJUST pin provides easy output voltage programming. For current regulation applications, a single resistor whose resistance value is 1.25 V / IOUT and power rating is greater than (1.25 V)2 / R should be used. For voltage regulation applications, two resistors set the output voltage. 8.4 Device Functional Modes 8.4.1 Normal operation The device OUTPUT pin will source current necessary to make OUTPUT pin 1.25 V greater than ADJUST terminal to provide output regulation. 10 Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 TLV1117 www.ti.com SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 Device Functional Modes (continued) 8.4.2 Operation With Low Input Voltage The adjustable version of the device requires 1-V headroom (VI - VO) to operate in regulation. With less headroom, the device may drop out and OUTPUT voltage will be INPUT voltage minus drop out voltage. 8.4.3 Operation at Light Loads The device passes its bias current to the OUTPUT pin. The load or feedback must consume this minimum current for regulation or the output may be too high. 8.4.4 Operation in Self Protection When an overload occurs the device will shut down the output stage or reduce the output current to prevent device damage. The device will automatically reset from the overload. The output may be reduced or alternate between on and off until the overload is removed. Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 11 TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com 9 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI's customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality. 9.1 Typical Application 1N4002 (See Note D) TLV1117 - ADJ INPUT VI OUTPUT VO ADJ/GND 10 F (see Note C) IADJ VREF R1 100 F (see Note A) CADJ (see Note B) R2 Figure 9. Basic Adjustable Regulator The adjustable version of the TLV1117 will take a 2.7 to 15-V input. The voltage VREF refers to the voltage between the output and the ADJUST pin, typically 1.25 V. The VREF voltage causes a current to flow across R1, which is the same current that will flow across R2 (minus the negligible 50-A IADJ). Therefore, R2 can be adjusted to create a larger voltage drop from GND and set the output voltage. The output voltage equation is described in Detailed Design Procedure. 9.1.1 Design Requirements * (A) Output capacitor selection is critical for regulator stability. Larger COUT values benefit the regulator by improving transient response and loop stability. This device is designed to be stable with tantalum and aluminum electrolytic output capacitors having an ESR between 0.2 and 10 . * (B) CADJ can be used to improve ripple rejection. If CADJ is used, a COUT that is larger in value than CADJ must be used. * (C) CIN is recommended if TLV1117 device is not located near the power-supply filter. * (D) An external diode is recommended to protect the regulator if the input instantaneously is shorted to GND. 9.1.2 Detailed Design Procedure The output voltage can be calculated as shown in Figure 10: VOUT R2 * VREF1 IADJ u R2 (c) R1 Figure 10. IADJ can be neglected in most applications because its value is approximately 80 A. 12 Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 TLV1117 www.ti.com SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 Typical Application (continued) 9.1.3 Application Curves 1.4 1.2 TJ = 255C Dropout Voltage (V) 1 0.8 TJ = 1255C 0.6 0.4 0.2 0 0 100 200 300 400 500 600 700 800 Load Current (mA) Figure 11. Dropout Voltage vs Load Current 10 Power Supply Recommendations The fixed and adjustable versions of the TLV1117 have different recommended ranges of operating voltage. Refer to Recommended Operating Conditions for specific operating ranges. 11 Layout 11.1 Layout Guidelines One or two input capacitors are recommended if the TLV1117 is not located near its power supply output filter capacitor. These capacitors can filter high-frequency noise and mitigate brief voltage surges from the input. Traces on the input and output pins of the device should be wide enough to support the full range of current needed in the application to minimize IxR drop. 11.2 Layout Example OUTPUT Ground COUT R2 Power INPUT OUTPUT R1 ADJ/GND Cadj PF Ground Figure 12. Layout Example Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 13 TLV1117 SLVS561L - DECEMBER 2004 - REVISED OCTOBER 2014 www.ti.com 12 Device and Documentation Support 12.1 Trademarks All trademarks are the property of their respective owners. 12.2 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 12.3 Glossary SLYZ022 -- TI Glossary. This glossary lists and explains terms, acronyms and definitions. 13 Mechanical, Packaging, and Orderable Information The following pages include mechanical packaging and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser based versions of this data sheet, refer to the left hand navigation. 14 Submit Documentation Feedback Copyright (c) 2004-2014, Texas Instruments Incorporated Product Folder Links: TLV1117 PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLV1117-15CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T2 TLV1117-15CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T2 TLV1117-15CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T2 TLV1117-15CDRJR ACTIVE SON DRJ 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR 0 to 125 ZYH TLV1117-15IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T3 TLV1117-15IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T3 TLV1117-15IKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 125 ZF15 TLV1117-18CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T4 TLV1117-18CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T4 TLV1117-18CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T4 TLV1117-18CDRJR ACTIVE SON DRJ 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR 0 to 125 ZYK TLV1117-18CKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR 0 to 125 ZE18 TLV1117-18IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T5 TLV1117-18IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T5 TLV1117-18IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T5 TLV1117-18IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 ZYL TLV1117-18IKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 125 ZF18 Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 24-Aug-2018 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLV1117-25CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T6 TLV1117-25CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T6 TLV1117-25CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 T6 TLV1117-25CKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR 0 to 125 ZE25 TLV1117-25IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T8 TLV1117-25IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 T8 TLV1117-25IDRJR ACTIVE SON DRJ 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 ZYN TLV1117-25IKCS PREVIEW TO-220 KCS 3 50 TBD Call TI Call TI -40 to 125 TLV1117-33CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V3 TLV1117-33CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V3 TLV1117-33CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V3 TLV1117-33CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V3 TLV1117-33CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR 0 to 125 ZYP TLV1117-33CKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR 0 to 125 ZE33 TLV1117-33DCY PREVIEW SOT-223 DCY 4 80 TBD Call TI Call TI 0 to 125 TLV1117-33IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 (V3, VS) TLV1117-33IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 (V3, VS) TLV1117-33IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 VS TLV1117-33IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 VS Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 24-Aug-2018 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLV1117-33IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 ZYR TLV1117-33IKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 125 ZF33 TLV1117-50CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 VT TLV1117-50CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 VT TLV1117-50CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 VT TLV1117-50CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 VT TLV1117-50CDRJR ACTIVE SON DRJ 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR 0 to 125 ZE50 TLV1117-50CKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR 0 to 125 ZE50 TLV1117-50IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 VU TLV1117-50IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 VU TLV1117-50IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 VU TLV1117-50IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 ZF50 TLV1117-50IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 ZF50 TLV1117-50IKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 125 ZF50 TLV1117CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V4 TLV1117CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V4 TLV1117CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V4 TLV1117CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR 0 to 125 V4 Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 24-Aug-2018 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLV1117CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR 0 to 125 ZYS TLV1117CKCS ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type 0 to 125 TLV1117C TLV1117CKCT ACTIVE TO-220 KCT 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type 0 to 125 TLV1117C TLV1117CKTTR ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 TLV1117C TLV1117CKTTRG3 ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) CU SN Level-3-245C-168 HR 0 to 125 TLV1117C TLV1117CKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR 0 to 125 TV1117 TLV1117IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 V2 TLV1117IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 V2 TLV1117IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 V2 TLV1117IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR -40 to 125 V2 TLV1117IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 ZYT TLV1117IKCS ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 125 TLV1117I TLV1117IKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 125 TLV1117I TLV1117IKTTR ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) CU SN Level-3-245C-168 HR -40 to 125 TLV1117I TLV1117IKVURG3 ACTIVE TO-252 KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 125 TY1117 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 4 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jul-2018 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TLV1117-15CDCYR SOT-223 DCY 4 2500 330.0 12.4 TLV1117-15CDCYR SOT-223 DCY 4 2500 330.0 TLV1117-15CDRJR SON DRJ 8 3000 330.0 TLV1117-15IDCYR SOT-223 DCY 4 2500 TLV1117-15IDCYR SOT-223 DCY 4 TLV1117-15IKVURG3 TO-252 KVU TLV1117-15IKVURG3 TO-252 KVU TLV1117-18CDCYR SOT-223 TLV1117-18CDCYR TLV1117-18CDRJR TLV1117-18CKVURG3 W Pin1 (mm) Quadrant 7.05 7.4 1.9 8.0 12.0 Q3 12.4 7.0 7.42 2.0 8.0 12.0 Q3 12.4 4.25 4.25 1.15 8.0 12.0 Q2 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 DCY 4 2500 330.0 12.4 6.55 7.25 1.9 8.0 12.0 Q3 SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 SON DRJ 8 3000 330.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-18CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117-18IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 TLV1117-18IDCYR SOT-223 DCY 4 2500 330.0 12.4 6.55 7.25 1.9 8.0 12.0 Q3 TLV1117-18IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117-18IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-18IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117-25CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jul-2018 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TLV1117-25CDCYR SOT-223 DCY 4 2500 330.0 12.4 TLV1117-25CKVURG3 TO-252 KVU 3 2500 330.0 16.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 7.05 7.4 1.9 8.0 12.0 Q3 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-25CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117-25IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 TLV1117-25IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117-25IDRJR SON DRJ 8 3000 330.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117-33CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 TLV1117-33CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117-33CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117-33CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117-33CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-33IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117-33IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117-33IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-33IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117-50CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 TLV1117-50CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117-50CDRJR SON DRJ 8 3000 330.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117-50CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-50CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117-50IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117-50IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117-50IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117-50IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117CDCYR SOT-223 DCY 4 2500 330.0 12.4 6.55 7.25 1.9 8.0 12.0 Q3 TLV1117CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 TLV1117CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117CKTTR DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2 TLV1117CKTTR DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.8 16.1 4.9 16.0 24.0 Q2 TLV1117CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 TLV1117IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.0 7.42 2.0 8.0 12.0 Q3 TLV1117IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3 TLV1117IDCYR SOT-223 DCY 4 2500 330.0 12.4 6.55 7.25 1.9 8.0 12.0 Q3 TLV1117IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2 TLV1117IKTTR DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.8 16.3 5.11 16.0 24.0 Q2 TLV1117IKTTR DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.8 16.1 4.9 16.0 24.0 Q2 TLV1117IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 TLV1117IKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.8 8.0 16.0 Q2 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jul-2018 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV1117-15CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-15CDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-15CDRJR SON DRJ 8 3000 367.0 367.0 35.0 TLV1117-15IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-15IDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-15IKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-15IKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-18CDCYR SOT-223 DCY 4 2500 336.0 336.0 48.0 TLV1117-18CDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-18CDRJR SON DRJ 8 3000 367.0 367.0 35.0 TLV1117-18CKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-18CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-18IDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-18IDCYR SOT-223 DCY 4 2500 336.0 336.0 48.0 TLV1117-18IDRJR SON DRJ 8 1000 210.0 185.0 35.0 TLV1117-18IKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-18IKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-25CDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-25CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 Pack Materials-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jul-2018 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV1117-25CKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-25CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-25IDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-25IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-25IDRJR SON DRJ 8 3000 367.0 367.0 35.0 TLV1117-33CDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-33CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-33CDRJR SON DRJ 8 1000 210.0 185.0 35.0 TLV1117-33CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-33CKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-33IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-33IDRJR SON DRJ 8 1000 210.0 185.0 35.0 TLV1117-33IKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-33IKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-50CDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117-50CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-50CDRJR SON DRJ 8 3000 367.0 367.0 35.0 TLV1117-50CKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-50CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117-50IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117-50IDRJR SON DRJ 8 1000 210.0 185.0 35.0 TLV1117-50IKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117-50IKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117CDCYR SOT-223 DCY 4 2500 336.0 336.0 48.0 TLV1117CDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117CDRJR SON DRJ 8 1000 210.0 185.0 35.0 TLV1117CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0 TLV1117CKTTR DDPAK/TO-263 KTT 3 500 350.0 334.0 47.0 TLV1117CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117CKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 TLV1117IDCYR SOT-223 DCY 4 2500 350.0 334.0 47.0 TLV1117IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 TLV1117IDCYR SOT-223 DCY 4 2500 336.0 336.0 48.0 TLV1117IDRJR SON DRJ 8 1000 210.0 185.0 35.0 TLV1117IKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0 TLV1117IKTTR DDPAK/TO-263 KTT 3 500 350.0 334.0 47.0 TLV1117IKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 TLV1117IKVURG3 TO-252 KVU 3 2500 350.0 334.0 47.0 Pack Materials-Page 4 MECHANICAL DATA MPDS094A - APRIL 2001 - REVISED JUNE 2002 DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE 6,70 (0.264) 6,30 (0.248) 3,10 (0.122) 2,90 (0.114) 4 0,10 (0.004) M 3,70 (0.146) 3,30 (0.130) 7,30 (0.287) 6,70 (0.264) Gauge Plane 1 2 0,84 (0.033) 0,66 (0.026) 2,30 (0.091) 4,60 (0.181) 1,80 (0.071) MAX 3 0-10 0,10 (0.004) M 0,25 (0.010) 0,75 (0.030) MIN 1,70 (0.067) 1,50 (0.059) 0,35 (0.014) 0,23 (0.009) Seating Plane 0,08 (0.003) 0,10 (0.0040) 0,02 (0.0008) 4202506/B 06/2002 NOTES: A. B. C. D. All linear dimensions are in millimeters (inches). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Falls within JEDEC TO-261 Variation AA. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OUTLINE KVU0003A TO-252 - 2.52 mm max height SCALE 1.500 TO-252 10.41 9.40 B 1.27 0.89 6.22 5.97 A 1 2.29 2 4.58 5.460 4.953 6.70 6.35 3 0.890 0.635 C A B 1.02 0.61 3X 0.25 NOTE 3 OPTIONAL 0.61 0.46 2.52 MAX C 0.61 0.46 SEE DETAIL A 5.21 MIN 3 2 4.32 MIN 4 1 EXPOSED THERMAL PAD NOTE 3 0.51 GAGE PLANE 0 -8 0.13 0.00 1.78 1.40 A 7.000 DETAIL A TYPICAL 4218915/A 02/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Shape may vary per different assembly sites. 4. Reference JEDEC registration TO-252. www.ti.com EXAMPLE BOARD LAYOUT KVU0003A TO-252 - 2.52 mm max height TO-252 2X (2.75) 2X (1) (6.15) 1 4 (4.58) SYMM (5.55) 3 (R0.05) TYP (4.2) (2.5) PKG LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:6X 0.07 MAX ALL AROUND 0.07 MIN ALL AROUND EXPOSED METAL EXPOSED METAL SOLDER MASK OPENING METAL SOLDER MASK OPENING METAL UNDER SOLDER MASK NON SOLDER MASK DEFINED SOLDER MASK DEFINED SOLDER MASK DETAILS NOT TO SCALE 4218915/A 02/2017 NOTES: (continued) 5. This package is designed to be soldered to a thermal pad on the board. For more information, see Texas Instruments literature numbers SLMA002(www.ti.com/lit/slm002) and SLMA004 (www.ti.com/lit/slma004). 6. Vias are optional depending on application, refer to device data sheet. It is recommended that vias under paste be filled, plugged or tented. www.ti.com EXAMPLE STENCIL DESIGN KVU0003A TO-252 - 2.52 mm max height TO-252 (1.18) TYP 2X (1) 2X (2.75) (0.14) 1 (R0.05) (1.33) TYP SYMM (4.58) 4 3 20X (0.98) (4.2) 20X (1.13) PKG SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL EXPOSED PAD 65% PRINTED SOLDER COVERAGE BY AREA SCALE:8X 4218915/A 02/2017 NOTES: (continued) 7. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 8. Board assembly site may have different recommendations for stencil design. www.ti.com PACKAGE OUTLINE KCS0003B TO-220 - 19.65 mm max height SCALE 0.850 TO-220 4.7 4.4 10.36 9.96 1.32 1.22 2.9 2.6 6.5 6.1 8.55 8.15 (6.3) ( 3.84) 12.5 12.1 19.65 MAX 9.25 9.05 3X 3.9 MAX 13.12 12.70 3 1 3X 0.47 0.34 0.90 0.77 2.79 2.59 2X 2.54 3X 1.36 1.23 5.08 4222214/B 08/2018 NOTES: 1. Dimensions are in millimeters. Any dimension in brackets or parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Reference JEDEC registration TO-220. www.ti.com EXAMPLE BOARD LAYOUT KCS0003B TO-220 - 19.65 mm max height TO-220 0.07 MAX ALL AROUND 3X 2X (1.7) METAL (1.2) 2X SOLDER MASK OPENING (1.7) 2 1 R (0.05) SOLDER MASK OPENING (2.54) 3 0.07 MAX ALL AROUND (5.08) LAND PATTERN EXAMPLE NON-SOLDER MASK DEFINED SCALE:15X 4222214/B 08/2018 www.ti.com REVISIONS REV DESCRIPTION ECR DATE A RELEASE NEW DRAWING 2151829 10/22/2015 J. NOQUIL / T. LEQUANG A CORRECT NOTE 1 2175971 08/17/2018 E. PREISS / K. SINCERBOX SCALE SIZE A 4222214 ENGINEER / DRAFTSMAN PAGE REV B 4 OF 4 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2018, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: TLV1117-18CDCYRG3 TLV1117-25CDCYRG3 TLV1117-33CDCYRG3 TLV1117-33IDCYRG3 TLV111750CDCYRG3 TLV1117-50IDCYRG3 TLV1117IDCYG3 TLV1117-15CDCYRG3 TLV1117-18CDCYG3 TLV111718IDCYG3 TLV1117-18IDCYRG3 TLV1117-33CDCYG3 TLV1117-33IDCYG3 TLV1117-50CDCYG3 TLV111733IDRJRG4 TLV1117-50CDRJRG4 TLV1117-50IDRJRG4 TLV1117-15CDCY TLV1117-15CDCYR TLV111715CDRJR TLV1117-15IDCY TLV1117-15IDCYR TLV1117-18CDCY TLV1117-18CDCYR TLV1117-18CDRJR TLV1117-18IDCY TLV1117-18IDCYR TLV1117-18IDRJR TLV1117-25CDCY TLV1117-25CDCYR TLV1117-25IDCY TLV1117-25IDCYR TLV1117-25IDRJR TLV1117-33CDCY TLV1117-33CDCYR TLV1117-33CDRJR TLV111733IDCY TLV1117-33IDCYR TLV1117-33IDRJR TLV1117-50CDCY TLV1117-50CDCYR TLV1117-50CDRJR TLV1117-50IDCY TLV1117-50IDCYR TLV1117-50IDRJR TLV1117CDCY TLV1117CDCYG3 TLV1117CDCYR TLV1117CDRJR TLV1117CKCS TLV1117CKCSE3 TLV1117CKTER TLV1117CKTPR TLV1117CKTPRG3 TLV1117CKVURG3 TLV1117IDCY TLV1117IDCYR TLV1117IDRJR TLV1117IKCS TLV1117IKCSE3 TLV1117IKTER TLV1117IKTPR TLV1117IKTPRG3 TLV1117IKVURG3 TLV1117CDCYRG3 TLV1117IDCYRG3 TLV1117-15CKVURG3 TLV1117-15IKVURG3 TLV1117-18CKVURG3 TLV1117-18IKVURG3 TLV1117-25CKVURG3 TLV1117-33CKVURG3 TLV1117-33IKVURG3 TLV1117-50CKVURG3 TLV1117-50IKVURG3 TLV1117CKTTR TLV1117CKTTRG3 TLV1117IKTTR TLV1117IKTTRG3 TLV1117CKCT