IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, (Single, Dual, Quad Channel) Single Channel A 1 6 B C 2 5 C NC 3 4 E FEATURES * * * * * * * Dual Channel A 1 8 E C 2 7 C C 3 6 C A 4 5 E AGENCY APPROVALS * UL1577, file no. E52744 system code H, double protection * cUL tested to CSA 22.2 bulletin 5A * DIN EN 60747-5-2 (VDE 0884) / DIN EN 60747-5-5 pending available with option 1 * BSI IEC 60950; IEC 60065 * FIMKO Quad Channel SMD A 1 16 E C 2 15 C C 3 14 C A 4 13 E A 5 12 E C 6 11 C C 7 10 C A 8 9 125 mA load current rating Fast rise time, 10 s Fast fall time, 35 s Single, dual and quad channel Solid state reliability Standard DIP packages Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The IL30 single, ILD55 dual, and ILQ30, ILQ31, ILQ55 quad are optically coupled isolators with gallium arsenide infrared emitters and silicon photodarlington sensors. Switching can be achieved while maintaining a high degree of isolation between driving and load circuits, with no crosstalk between channels. These optocouplers can be used to replace reed and mercury relays with advantages of long life, high speed switching and elimination of magnetic fields. The ILD55 is designed to reduce board space requirements in high density applications. E ORDERING INFORMATION DIP I L x # # - X PART NUMBER 0 0 # PACKAGE OPTION T TAPE AND REEL 7.62 mm Option 7 Option 9 x = D (Dual) or Q (Quad) > 0.7 mm AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO DIP-6 DIP-8 SMD-8, option 7 SMD-8, option 9 DIP-16 SMD-16, option 7 SMD-16, option 9 VDE, UL, cUL, BSI, FIMKO DIP-16 SINGLE CHANNEL DUAL CHANNEL 100 IL30 - 100 ILD55 ILD55-X007 ILD55-X009T (1) - > 0.1 mm QUAD CHANNEL CTR - - 100 - 100 - 100 ILQ30, ILQ55 ILQ55-X007 ILQ30-X009, ILQ55-X009T (1) 100 ILQ30-X001 200 ILQ31 200 - Notes * Additional options may be possible, please contact sales office. (1) Also available in tubes, do not put "T" on the end. Rev. 1.8, 28-Jul-14 Document Number: 83621 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER INPUT Peak reverse voltage Forward continuous current Power dissipation Derate linearly from 25 C OUTPUT TEST CONDITION Collector emitter breakdown voltage PART SYMBOL VALUE UNIT VRM IF Pdiss 3 60 100 1.33 V mA mW mW/C IL30 ILQ30 ILD55 ILQ55 BVCEO BVCEO BVCEO BVCEO IC Pdiss 30 30 55 55 125 150 2 V V V V mA mW mW/C IL30 ILD55 ILQ30 ILQ31 ILQ55 IL30 ILD55 ILQ30 ILQ31 ILQ55 Ptot Ptot Ptot Ptot Ptot 250 400 500 500 500 3.3 3.3 6.67 6.67 6.67 5300 7 7 175 -55 to +125 mW mW mW mW mW mW/C mW/C mW/C mW/C mW/C VRMS mm mm -55 to +100 10 C s Collector (load) current Power dissipation Derate linearly from 25 C COUPLER Total package power dissipation Derate linearly from 25 C Isolation test voltage Creepage distance Clearance distance Comparative tracking index Storage temperature COUPLER Operating temperature Lead soldering time at 260 C VISO CTI Tstg Tamb C Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER INPUT Forward voltage Reverse current Capacitance OUTPUT Collector emitter breakdown voltage Collector emitter leakage current Collector emitter capacitance COUPLER Collector emitter saturation voltage Isolation test voltage Isolation resistance Capacitance (input to output) TEST CONDITION SYMBOL IF = 20 mA VR = 3 V VR = 0 V VF IR CO IC = 100 A VCE = 10 V, IF = 0 A VCE = 10 V, f = 1 MHz BVCEO ICEO CCE IC = 50 mA, IF = 50 mA VCEsat MIN. TYP. MAX. UNIT 1.25 0.1 25 1.5 10 V A pF 1 3.4 100 0.9 1 30/55 5300 RIO CIO 1012 0.5 V nA pF V VRMS pF Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 1.8, 28-Jul-14 Document Number: 83621 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION Current transfer ratio IF = 10 mA, VCE = 5 V PART SYMBOL MIN. TYP. IL30 CTR 100 400 MAX. UNIT % ILD55 CTR 100 400 % ILQ30 CTR 100 400 % ILQ55 CTR 100 400 % ILQ31 CTR 200 400 % SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Rise time VCC = 13.5 V, IF = 50 mA, RL = 100 tr MIN. TYP. 10 MAX. UNIT s Fall time VCC = 13.5 V, IF = 50 mA, RL = 100 tf 35 s TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 10 1.3 Tamb = -55 C NIce - Normalized Ice VF - Forward Voltage (V) 1.4 1.2 Tamb = 25 C 1.1 1.0 0.9 Tamb = 85 C VCE = 5 V VCE = 1 V 0.1 0.01 0.8 0.001 0.1 0.7 0.1 1 10 100 IF - Forward Current (mA) iil30_01 10 100 Fig. 3 - Normalized Non-Saturated and Saturated Collector Emitter Current vs. LED Current 10 Normalized to: VCE = 5 V IF = 10 mA 0.8 0.6 VCE = 5 V 0.4 0.2 NIcb - Normalized (Icb) 1.2 1.0 1 IF - LED Current (mA) iil30_03 Fig. 1 - Forward Voltage vs. Forward Current NCTRce - Normalized CTRce 1 Normalized to: IF = 10 mA VCE = 5 V 1 Normalized to: Vcb = 3.5 V IF = 10 mA 0.1 0.01 VCE = 1 V 0.0 0.1 iil30_02 1 10 100 1000 IF - LED Current (mA) Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Rev. 1.8, 28-Jul-14 0.001 0.1 iil30_04 1 10 100 IF - LED Current (mA) Fig. 4 - Normalized Collector Base Photocurrent vs. LED Current Document Number: 83621 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors 12 000 VCE = 5 V IF hFE - Current Gain 10 000 8000 VCE = 1 V tD tR 6000 VO t PLH 4000 2000 V TH = 1.5 V 0 0.01 t PHL 0.1 iil30_05 1 10 tF iil30_08 Base Current Fig. 8 - Switching Waveform Fig. 5 - hFE Current Gain vs. Base Current VCC = 13.5 V 80 tpLH - Low/High Propagation Delay (s) tS 100 VCC = 5 V Vth = 1.5 V 1 k 60 F = 10 kHz, DF = 50 % RL VO 220 40 470 20 IF = 50 mA 100 0 5 0 10 15 20 IF - LED Current (mA) iil30_06 iil30_09 Fig. 6 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current Fig. 9 - Switching Schematic tpHL - High/Low Propagation delay (s) 20 VCC = 5 V Vth = 1.5 V 1 k 15 10 100 5 0 0 iil30_07 5 10 15 20 IF - LED Current (mA) Fig. 7 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current Rev. 1.8, 28-Jul-14 Document Number: 83621 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters DIP-6 9.00 max. 8.60 0.10 7.62 typ. 6.50 0.25 0.50 0.10 0.79 min. 2.54 typ. 1.27 0.10 0.85 0.10 6 5 4 1 2 3 3.10 0.50 3.55 0.25 0.90 min. 3 to 9 0.25 0.10 PIN ONE I.D. DIP-8 10.20 max. 9.75 0.15 7.62 typ. 6.60 0.25 0.50 min. 1.27 0.10 0.50 0.10 2.54 typ. 8 7 6 5 1 2 3 4 3.10 0.50 3.55 0.25 0.70 min. 3 to 9 .10 0.25 0 PIN ONE I.D. Rev. 1.8, 28-Jul-14 Document Number: 83621 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors DIP-16 20.30 max. 7.62 typ. 19.90 0.15 6.60 0.25 0.50 min. 1.27 0.10 0.50 0.10 3.10 0.50 3.55 0.25 0.70 min. .10 3 to 9 0.25 0 2.54 typ. 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 PIN ONE I.D. SMD-6, Option 7 10.30 max. 7.62 typ. 9.00 max. 8.60 0.10 6.50 0.25 1.27 0.10 0.25 0.10 4.30 0.30 0.70 min. 3.55 0.25 0.90 min. 0.50 min. 2.54 typ. 5 Leads coplanarity 0.1 max. 4 .25 R0 1.78 2.54 0.76 6 8.00 min. 1.52 PIN ONE I.D. 8.00 min. 11.05 1 Rev. 1.8, 28-Jul-14 2 3 Document Number: 83621 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-6, Option 9 10.05 max. 7.62 typ. 6.50 0.25 9.00 max. 8.60 0.10 3.55 0.25 0.20 0.10 0.25 0.10 0.90 min. 0.50 min. 1.27 0.10 8.00 min. Leads coplanarity 0.1 max. 2.54 typ. 5 4 .25 R0 1.78 2.54 0.76 6 1.52 PIN ONE I.D. 8.00 min. 11.05 1 2 3 SMD-8, Option 7 0.25 0.10 0.50 min. 3.55 0.25 0.70 min. 4.30 0.30 10.30 max. 7.62 typ. 6.60 0.25 10.20 max. 9.75 0.15 1.27 0.10 0.50 min. 2.54 typ. 7 6 Leads coplanarity 0.1 max. 5 .25 R0 1.78 2.54 0.76 8 8.00 min. 1.52 8.00 min. PIN ONE I.D. 1 Rev. 1.8, 28-Jul-14 2 3 4 11.05 Document Number: 83621 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-8, Option 9 10.05 max. 7.62 typ. 6.60 0.25 10.20 max. 9.75 0.15 1.27 0.10 0.25 0.10 3.55 0.25 0.20 0.10 0.70 min. 0.50 min. 8.00 min. Leads coplanarity 0.1 max. 2.54 typ. 8 6 5 0.76 7 .25 1.78 2.54 R0 1.52 8.00 min. PIN ONE I.D. 1 2 3 4 11.05 SMD-16, Option 7 0.25 0.10 3.55 0.25 0.50 min. 19.90 0.15 0.70 min. 4.30 0.30 10.30 max. 7.62 typ. 6.60 0.25 20.30 max. 1.27 0.10 0.50 min. 2.54 typ. 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.76 16 Leads coplanarity 0.1 max. 8.00 min. .25 R0 1.78 2.54 PIN ONE I.D. 1.52 8.00 min. 11.05 Rev. 1.8, 28-Jul-14 Document Number: 83621 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-16, Option 9 10.05 max. 7.62 typ. 6.60 0.25 20.30 max. 19.90 0.15 1.27 0.10 0.25 0.10 3.55 0.25 0.20 0.10 0.70 min. 0.50 min. Leads coplanarity 0.1 max. 8.00 min. 2.54 typ. 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.76 16 .25 R0 1.78 2.54 PIN ONE I.D. 1.52 8.00 min. 11.05 PACKAGE MARKING (Example) ILD55 V YWW H 68 Notes * Only option 1 and 7 reflected in the package marking * The VDE logo is only marked on option 1 parts * Tape and reel suffix (T) is not part of the package marking Rev. 1.8, 28-Jul-14 Document Number: 83621 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: IL30 IL31 ILD30 ILD31 ILD55 ILQ55 ILQ30 ILQ31 ILD30-X009 ILD30-X009T ILD31-X007 ILD31-X007T ILD31-X009T ILD31-X017T ILD55-X007 ILD55-X009 ILD55-X009T ILQ30-X001 ILQ30-X009 ILQ55-X007 ILQ55X009 ILQ55-X009T