April 2006 / A
Page 1
TAK CHEONG ®
SEMICONDUCTOR
DO-41 General Purpose
Plastic Silicon Rectifier
Specification Features:
Case: Epoxy, Molded
Weight: 0.4 gram (approximately)
Finish: All external surfaces corrosion resistant and terminal leads are
readily solderable
Lead and mounting surface temperature for soldering purposed:
260℃ Max. for 10 seconds 1.16 inch from case
Low reverse leakage, High forward surge capability
Cathode indicated by polarity band
Absolute Ma ximum Ra ti ng s TA = 25°C unless otherwise noted
Parameter TC1N4001 TC1N4002 TC1N4003 TC1N4004 TC1N4005 TC1N4006 TC1N4007 Units
Maximum repetitive peak
reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage 35 70 140 280 420 560 700 V
Maximum DC blocking voltage 50 100 200 400 600 800 1000 V
Maximum average forward
rectifier current IF(AV)
0.375” (9.5mm) lead length at
TA=75℃
1.0 A
Peak forward surge current
8.3mS single half sine-wave
superimposed on reted load 30 A
Maximum full load reverse
current, IR(AV)
full cycle average 0.375”
(9.5mm) lead length TL=75℃
30 uA
Operating Junction and storage
temperature range -50 to +150 °C
Typical Thermal Resistance
(note1) 60 °C/W
Note 1: Thermal resistance from junctiont ambient at 0.375” (9.5mm) lead length, P.C.B. mounted.
Electrical Characteristics TA = 25°C unless otherwise noted
Device Type BV @ IR
(Volts)
Min
IR
(uA)
IR @ VR
(uA)
Max
VR
(Volts)
TC1N4001 50 5 5 50
TC1N4002 100 5 5 100
TC1N4003 200 5 5 200
TC1N4004 400 5 5 400
TC1N4005 600 5 5 600
TC1N4006 800 5 5 800
TC1N4007 1000 5 5 1000
VF Forward Voltage = 1.1 V Maximum @ IF = 1.0 A for all types
CJ Typical Junction Capacitance = 15 pF at 4.0V, 1MHz
AXIAL LEAD
DO-41
DEVICE MARKING DIAGRAM
1N400X : TC1N4001~TC1N4007
: Tak Cheong Logo
Y : Assembly site code (1, 2, 3…)
Cathode Anode
ELECTRICAL SYMBOL
1N4001
Y
TC1N4001 through TC1N4007 Series
April 2006 / A
Page 2
TAK CHEONG ®
SEMICONDUCTOR
Ordering Information
Device Package Quantity
TC1N4001~TC1N4007 Bulk 1,000
TC1N4001~TC1N4007TB Tape and Ammo 5,000
TC1N4001~TC1N4007TR Tape and Reel 5,000
Others (…contact Tak Cheong sales representatives)
Package Outline
Package Case Outline
DO-41 D0-41
Millimeters Inches
DIM
Min Max Min Max
A 0.72 0.86 0.028 0.034
B 4.10 5.20 0.161 0.205
C 25.40 --- 1.000 ---
D 2.04 2.71 0.080 0.107
Notes: 1. All dimensions are within JEDEC standard DO-204AL.
2. DO-41 polarity denoted by cathode band.
