For technical questions in the Americas, contact foilsupport1@vishay.com
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com
Document Number: 63031
Revision 08-Mar-05
www.vishay.com
116
QPL Networks
Vishay Foil Resistors
THROUGH HOLE
• ISRAEL: foilsales.israel@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com • AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
SALES
Bulk Metal® Foil Technology
1445Q-14 Pin and 1446Q-16 Pin DIP Packages
FEATURES
Hermetically Sealed for maximum environmental
protection - 100% leak protection
Gross Leak: No bubbles
Fine Leak: < 5 x 10–7 cc/sec
(MIL-STD-220, Method 112, Test C, Procedure 111A)
•Tested per MIL-PRF-83401
Ceramic Package: 94% Alumina (Al2O3)
Lid: Gold plated Kovar
Solder: Tin/Gold
Leads: Alloy 42 (Iron Nickel) with 100µ Inches gold plating
(MIL-STD-1276, Type G-21-A)
Gold ball wire bonding
Foil Chips V15X5
ADDITIONAL TESTING TO MIL SPEC
Group A testing to MIL-PRF-83401 imposes the following:
1. Thermal shock 100%
5X from – 65 to + 125C.
2. Power conditioning 100%
2. 1 100 hours at 25C, full power.
2. 2 R and ratio calculation.
3. Visual and Mechanical after the above tests (sample plan)
3. 1 Conformity to physical size.
3. 2 Workmanship
3. 3 Damage due to the above tests.
4. 10% PDA or one piece whichever is greater.
5. Solderability (sample plan).
Group B sample testing to MIL-PRF-83401 imposes the following:
1. Temperature Coefficient of Resistance (sample plan).
2. Resistance to solvents (sample plan).
Vishay Models 1445Q and 1446Q networks are qualified to
MIL-PRF-83401, Characteristic C, Schematic A. Actual
performance exceeds all the requirements of MIL-PRF-83401
characteristics "C."
Model 1445Q contains 7 resistors and 1446Q contains 8 resistors.
Qualified resistance range is 100 ohms through 10Kohms. Other
values are available non-QPL. Power rating is 0.1 Watt.
0.040 –0.070
(1.01 –1.78)
0.830 + 0.046
- 0.070
(21.08 + 1.17)
- 1.78
0.300 ±0.010
(7.62 ±0 .25)
0.008 –0.016
(0.20 –0.41)
NO. 1 LEAD
0.200
(5.08) MAXIMUM
0.135 +0.015/ –0.010
(3.43 +0.38/–0.25)
0.015 –0.022
(0.38 –0.56)
0.100
(2.54) TYPICAL
(VIEWED FROM TOP)
FIGURE 1 - MODEL 1445Q DIMENSIONS
0.015 –0.022
(0.38 –0.56)
0.040 - 0.070 TYPICAL
(1.01 - 1.78)
0.270 +0.035/–0.030
(6.86 +0.89/–0.76)
0.008 –0.016
(0.20 –0.41)
NO. 1 LEAD
0.100
(2.54) TYP.
0.135 +0.015/–0.010
(3.43 +0.38/–0.25)
0.200 MAXIMUM
(5.08)
0.740 ±0.045
(18.80 ±1.14)
(VIEWED FROM TOP)
0.300 ±0.010
(7.62 ±0.25)
0.270 + 0.035
- 0.030
(6.86 + 0.89)
- 0.76
FIGURE 2 - MODEL 1446Q DIMENSIONS
Product may not
be to scale
TYPICAL
For technical questions in the Americas, contact foilsupport1@vishay.com
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com www.vishay.com
117
QPL Networks
Vishay Foil Resistors
Document Number: 63031
Revision 08-Mar-05
THROUGH HOLE
• ISRAEL: foilsales.israel@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com • AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
SALES
YRCVHKM
TEST OR CONDITION
1. R's are not cumulative. For purposes of determining reliability calculations, consider the characteristics shown as figures of merit and
allow no more than ± 0.05% R lifetime. Allow proportionately less if the severity of anticipated environmental stress is small compared to
the tests as defined in MIL-PRF-83401.
TABLE 2 - RESISTANCE VALUE
Example: 1002 = 10K
A four digit designator in
which the first three digits
are significant figures and
the fourth digit indicates
the number of zeros to
follow.
± 5 ± 25 ± 50 ± 50 ± 50 ± 100 ± 300
± 5 ± 5 ± 5 ± 5NANANA
+ 70°C
+ 125°C
± 0.02% ± 0.08% ± 0.25% ± 0.25% ± 0.50% ± 0.70% ± 0.70%
± 0.01% ± 0.04% ± 0.03% ± 0.03% NA NA NA
± 0.02% ± 0.03% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.50%
± 0.02% ± 0.02% ± 0.02% ± 0.02% NA NA NA
± 0.02% ± 0.03% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.50%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
± 0.01% ± 0.03% ± 0.10% ± 0.10% ± 0.25% ± 0.25% ± 0.25%
± 0.01% ± 0.02% ± 0.03% ± 0.03% NA NA NA
± 0.01% ± 0.05% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.25%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
± 0.02% ± 0.05% ± 0.20% ± 0.20% ± 0.40% ± 0.50% ± 0.50%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
± 0.02% ± 0.03% ± 0.25% ± 0.25% ± 0.25% ± 0.25% ± 0.25%
± 0.02% ± 0.02% ± 0.03% ± 0.03% NA NA NA
± 0.02% ± 0.03% ± 0.25% ± 0.25% ± 0.25% ± 0.25% ± 0.25%
± 0.02% ± 0.02% ± 0.03% ± 0.03% NA NA NA
± 0.05% ± 0.1% ± 0.10% ± 0.10% ± 0.50% ± 0.50% ± 2.00%
± 0.025% ± 0.03% ± 0.03% ± 0.03% NA NA NA
± 0.05% ± 0.1% ± 0.10% ± 0.10% ± 0.50% ± 0.50% ± 2.00%
± 0.025% ± 0.03% ± 0.03% ± 0.03% NA NA NA
± 0.02% ± 0.05% ± 0.10% ± 0.10% ± 0.20% ± 0.50% ± 1.00%
± 0.01% ± 0.02% ± 0.03% ± 0.03% NA NA NA
± 0.01% ± 0.03% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.50%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
10,000M
± 0.005(V) ± 0.05(A) ± 0.1%(B) ± 0.1%(B) ± 0.1%(B) ± 0.5%(D) ± 1.0%(F)
± 0.01(T) ± 0.1(B) ± 0.5%(D) ± 0.5%(D) ± 0.5%(D) ± 1.0%(F) ± 2.0%(G)
± 0.05(A) ± 0.5(D) ± 1.0%(F) ± 1.0%(F) ± 1.0%(F) ± 2.0%(G) ± 5.0%(J)
± 0.1(B)
± 0.5(D)
± 1.0(F)
FIGURE 3 - SCHEMATIC “A”
*For characteristics H, K and M the “C”
power rating must be acceptable.
CHARAC- TCR TCR SEAL
TERISTIC ABSOLUTE TRACK
C± 50 ± 5 Hermetic
V± 50 ± 5 Non-Hermetic
H± 50 N.A. Non-Hermetic
K± 100 N.A. Non-Hermetic
M± 300 N.A. Non-Hermetic
Qualification to Characteristic “C” allows Vishay
to supply to the following characteristics*
TABLE 1 - TCR CHARACTERISTIC
MIL-PRF-83401
For Model: /01 N = 7
/02 N = 8
1
N-1
2 3
N
Bulk Metal® Foil Technology
1445Q-14 Pin and 1446Q-16 Pin DIP Packages
Resistance Temp Characteristic ppm/°C
Tracking To Reference Element
(- 55 to + 125°C) ppm/°C
Max Ambient Temp at Rated Wattage
Max Ambient Temp at Zero Power
Thermal Shock and Power Conditioning
Low Temperature Operation R
Ratio
Short Time Overload R
Ratio
Terminal Strength R
Ratio
Resistance to Soldering Heat R
Ratio
Moisture Resistance R
Ratio
Shock (Specified Pulse) R
Ratio
Vibration, High Frequency R
Ratio
Load Life R
(+ 70°C, Full Power, 1,000 Hours) Ratio
+ 25°C Power Rating R
(1,000 hrs.) Ratio
High Temperature Exposure R
(+ 125°C, 100 Hours) Ratio
Low Temperature Storage R
Ratio
Insulation Resistance
Resistance Tolerance and,
when applicable,
Resistance Ratio Accuracy
TABLE 3 - MIL-PRF-83401 PERFORMANCE SPECIFICATIONS
N-1 N
For technical questions in the Americas, contact foilsupport1@vishay.com
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com
Document Number: 63031
Revision 08-Mar-05
www.vishay.com
118
QPL Networks
Vishay Foil Resistors
THROUGH HOLE
• ISRAEL: foilsales.israel@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com • AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
SALES
Vishay is qualified
from 100 through
10K.
(see Table 2)
M83401 01 C 1002 B A
MILITARY SLASH TCR RESISTANCE RESISTANCE SCHEMATIC**
SPECIFICATION SHEET CHARACTERISTIC VALUE TOLERANCE
MIL-PRF-83401 Vishay is qualified
to the following
slash sheets:
/01 14pin DIP,Vishay
P/N 1445Q
/02 16 pin DIP,Vishay
P/N 1446Q
Vishay is qualified
to Characteristic C
(see Table 1)
Vishay is quali-
fied to schematic
“A”.
(see Figure 3)
Vishay is qualified
to the following
tolerances:
B=0.1%
D=0.5%*
F=1.0%*
G= 2.0%
J=5.0%
*For standard values by tolerance see Table III of MIL-PRF-83401.
All values are considered standard when the specified tolerance is tighter than 0.10%.
** What to do if QPL is required and no schematic is available:
Schematic "X" – Additional special schematics may be identified as "X"
schematic and described fully in the detailed specifications.
DSCC Drawings – Anyone can request DSCC Drawings if the part is to be used
on a military contract. Submit either a catalog sheet or SCD
to DSCC or call Vishay for more information.
*** Hot solder dip leads are available upon request
EXAMPLES:
14 Pin, 7 Resistor, 10K000, 0.1% Tolerance —
M83401 01 C 1002 B A
MILITARY SLASH TCR RESISTANCE RESISTANCE SCHEMATIC
SPECIFICATION SHEET CHARACTERISTIC VALUE TOLERANCE
16 Pin, 8 Resistor, 100R00, 0.1% Tolerance —
M83401 02 C 1000 F A
MILITARY SLASH TCR RESISTANCE RESISTANCE SCHEMATIC
SPECIFICATION SHEET CHARACTERISTIC VALUE TOLERANCE
TABLE 4 - ORDERING INFORMATION - VISHAY QUALIFIED M83401 SERIES (MIL-PRF-83401) NETWORKS
Bulk Metal® Foil Technology
1445Q-14 Pin and 1446Q-16 Pin DIP Packages
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.