FR201 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS FR207 TECHNICAL SPECIFICATIONS OF FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * * * * * * Fast switching Low leakage Low forward voltage drop High current capability High current surge High reliability DO-15 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Mounting position: Any Weight: 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL FR201 FR202 FR203 FR204 FR205 FR206 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage T A = 25 oC IO 2.0 Amps I FSM 70 Amps VF 1.3 Volts 5.0 uAmps 100 uAmps IR Maximum Full Load Reverse Current Full Cycle Average, .375*(9.5mm) lead length at T L = 55 oC Maximum Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ 40 T J , T STG -65 to + 150 Operating and Storage Temperature Range FR207 UNITS 250 150 500 nSec pF 0 C NOTES : 1. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 88 NEXT NEXT NEXT EXIT BACK BACK EXI BACK EXIT RATING AND CHARACTERISTIC CURVES ( FR201 THRU FR207 ) DC COMPONENTS CO., LTD. R 89 NEXT EXIT BACK NEXT EXI BACK EXIT NEXT BACK