MCC MPSA42 THRU omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components MPSA43 Features NPN Silicon High Through Hole Package 150oC Junction Temperature Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Voltage Transistor 625mW Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Halogen free available upon request by adding suffix "-HF" * TO-92 A E Mechanical Data Case: TO-92, Molded Plastic B Marking: MPSA42 ----A42 MPSA43 ----MPSA43 Maximum Ratings @ 25oC Unless Otherwise Specified Charateristic Symbol Collector-Emitter Voltage MPSA42 VCEO MPSA43 Collector-Base Voltage MPSA42 VCBO MPSA43 MPSA42 Emitter-Base Voltage VEBO MPSA43 Collector Current(DC) IC Power Dissipation@T A=25oC Pd Power Dissipation@T C=25oC Pd Thermal Resistance, Junction to Ambient Air R JA Thermal Resistance, Junction to Case R JC Operating & Storage Temperature Value 300 200 300 200 Unit 5.0 V 300 625 5.0 1.5 12 mA mW mW/oC W mW/oC 200 o 83.3 Tj, TSTG -55~150 C V V C/W o C/W o C D E E B C B C STRAIGHT LEAD BENT LEAD BULK PACK AMMO PACK G DIMENSIONS DIM A B C D E G INCHES MIN .175 .175 .500 .016 .135 .095 .173 MM MAX .185 .185 --.020 .145 .105 .220 MIN 4.45 4.45 12.70 0.41 3.43 2.42 4.40 MAX 4.70 4.70 --0.63 3.68 2.67 5.60 NOTE Straight Lead Bent Lead * For ammo packing detailed specification, click here to visit our website of product packaging for details. www.mccsemi.com Revision: D 1 of 4 2013/01/01 MCC MPSA42 thru MPSA43 TM Micro Commercial Components ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Characteristic Min Max 300 200 -- -- 300 200 -- -- 5.0 -- -- -- 0.25 0.1 -- -- 0.25 0.1 Unit OFF CHARACTERISTICS Collector - Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB = 0) V(BR)CEO Vdc MPSA42 MPSA43 Collector - Base Breakdown Voltage (IC = 100 Adc, IE = 0) V(BR)CBO Vdc MPSA42 MPSA43 Emitter - Base Breakdown Voltage (IE = 10 Adc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 200 Vdc, IE = 0) (VCB = 160 Vdc, IE = 0) MPSA42 MPSA43 Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) (VEB = 4.0 Vdc, IC = 0) MPSA42 MPSA43 Vdc Adc ICBO Adc IEBO ON CHARACTERISTICS(1) hFE DC Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 50 mAdc, VCE = 10 Vdc) Collector - Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) 25 80 25 -- -- -- 0.5 0.4 VBE(sat) -- 0.9 Vdc fT 50 -- MHz -- -- 3.0 4.0 250 -- VCE(sat) MPSA42 MPSA43 Base-Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) Vdc SMALL- SIGNAL CHARACTERISTICS Current - Gain -- Bandwidth Product (IC = 10 mAdc, VCE = 5 Vdc, f = 30MHz) Collector-Base Capacitance (VCB = 20 Vdc, IE = 0, f = 1.0 MHz) 1. Pulse Test: Pulse Width 300 s, Duty Cycle Ccb MPSA42 MPSA43 pF 2.0%. www.mccsemi.com Revision: D 2 of 4 2013/01/01 MCC MPSA42 thru MPSA43 TM Micro Commercial Components 120 hFE , DC CURRENT GAIN VCE = 10 Vdc TJ = +125C 100 80 25C 60 40 -55C 20 0 0.1 1.0 10 100 IC, COLLECTOR CURRENT (mA) Figure 1. DC Current Gain 100 f T, CURRENT-GAIN -- BANDWIDTH (MHz) 80 C, CAPACITANCE (pF) Ceb @ 1MHz 10 1.0 0.1 0.1 Ccb @ 1MHz 1.0 10 100 VR, REVERSE VOLTAGE (VOLTS) 70 60 50 40 30 20 10 1.0 1000 Figure 2. Capacitance TJ = 25C VCE = 20 V f = 20 MHz 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 3. Current-Gain - Bandwidth 1.4 V, VOLTAGE (VOLTS) 1.2 VCE(sat) @ 25C, IC/IB = 10 VCE(sat) @ 125C, IC/IB = 10 VCE(sat) @ -55C, IC/IB = 10 VBE(sat) @ 25C, IC/IB = 10 1.0 0.8 VBE(sat) @ 125C, IC/IB = 10 VBE(sat) @ -55C, IC/IB = 10 VBE(on) @ 25C, VCE = 10 V VBE(on) @ 125C, VCE = 10 V VBE(on) @ -55C, VCE = 10 V 0.6 0.4 0.2 0.0 0.1 1.0 10 IC, COLLECTOR CURRENT (mA) 100 Figure 4. "ON" Voltages www.mccsemi.com Revision: D 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Ammo Packing: 20Kpcs/Carton Part Number-AP Part Number-BP Bulk: 100Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-AP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: D 4 of 4 2013/01/01 3