SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White PACKAGE DIMENSIONS 0.130 (3.3) 0.114 (2.9) O0.094 [O2.4] 0.118 (3.0) 0.102 (2.6) 0.091 (2.3) 0.083 (2.1) TOP POLARITY MARK 0.024 (0.6) 0.016 (0.4) 0.083 (2.1) 0.067 (1.7) 0.006 (0.15) 0.146 (3.7) 0.130 (3.3) SIDE 0.032 (0.8) BOTTOM _ _ for -2, -3, -4, -9, -B and W for -7 APPLICATIONS POLARITY * Automotive interior lighting NOTE: Dimensions for all drawings are in inches (mm). * Status indication for consumer electronics and office equipment DESCRIPTION These surface mount LEDs are designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configuration conform to EIA-535 BAAC standard specification for case size 3528 tantalum capacitor. These LEDs are ideal for backlighting and optical coupling into light pipes. FEATURES * GaN/SIC technology for -B and -W * Wide viewing angle of 120 * Water clear optics * Moisture-proof packaging * Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel (c) 2003 Fairchild Semiconductor Corporation Page 1 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White ABSOLUTE MAXIMUM RATINGS (TA =25C Unless otherwise specified) QTLP670C Parameter Symbol Units -2 -3 -4 -7 -B -W IF 30 30 30 30 30 30 mA Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) IFM 160 160 160 180 100 100 mA Reverse Voltage (IR = 10 A) VR 5 5 5 5 5 5 V Power Dissipation PD 84 84 84 72 135 135 mW Continuous Forward Current Operating Temperature TOPR -40 to +85 C Storage Temperature TSTG -40 to +90 C Lead Soldering Time TSOL 260 for 5 sec C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) QTLP670C Part Number Symbol Condition -2 -3 -4 -7 -B -W Luminous Intensity (mcd) Minimum Typical IV 5 5 15 25 20 20 10 10 25 40 30 30 2.8 2.8 2.8 2.4 4.5 4.5 2.0 2.0 2.1 1.9 3.8 3.8 IF = 20mA Forward Voltage (V) Maximum Typical VF IF = 20mA Wavelength (nm) Peak P 635 585 565 660 430 -- Dominant D 630 590 570 645 465 -- Chromatic Coordinate x,y -- -- -- -- -- x = 0.26 y = 0.28 IF = 20mA Spectral Line Half Width (nm) 45 35 30 20 65 -- IF = 20mA 21/2 120 120 120 120 120 120 IF = 20mA Viewing Angle () (c) 2003 Fairchild Semiconductor Corporation Page 2 of 7 IF = 20mA 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White TYPICAL PERFORMANCE CURVES Fig. 2 Relative Luminous Intensity vs. DC Forward Current Fig. 1 Forward Current vs. Forward Voltage 2.0 90 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 80 70 HER 60 GREEN AlGaAs RED 50 YELLOW 40 30 BLUE & WHITE 20 10 AlGaAs RED 1.5 1.0 BLUE & WHITE HER YELLOW GREEN 0.5 0.0 0 1.0 2.0 3.0 5.0 4.0 0 5 10 15 20 25 30 IF - DC FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) Fig. 3 Relative Intensity vs. Peak Wavelength HER WHITE GREEN YELLOW AlGaAs RED RELATIVE INTENSITY 1.0 0.5 0 300 350 400 450 BLUE 500 550 600 650 700 750 WAVELENGTH (nm) Fig.5 Maximum Forward Current vs. Ambient Temperature Fig.4 Radiation Diagram -20 -10 0 10 20 -30 30 -40 40 -50 50 -60 60 -70 70 -80 -90 1.0 IF - FORWARD CURRENT (mA) 50 40 30 20 10 80 0 90 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 0 1.0 40 60 80 100 TA - AMBIENT TEMPERATURE (C) REL. LUMINOUS INTENSITY (%) (c) 2003 Fairchild Semiconductor Corporation 20 Page 3 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.063 [1.60] 0.095 [2.41] 0.071 [1.80] 2X RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240 C MAX +5 C/s MAX -5 C/s MAX 60 - 120 sec Preheating 120 - 150 C MAX (c) 2003 Fairchild Semiconductor Corporation Page 4 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 +0.5 -0.0 O62.00.5 2.5 0 0.5 O1801 5 0. 2.5 O12.75 +0.25 -0.0 1.75 Progressive direction 2.00.05 4.0 0.23 O1.55.05 3.84 8.0 3.50.05 (sprocket) 4.0 2.24 3.12 for -2, -3, -4, -9, -B and -W Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm Polarity marks are on the sprocket side. (c) 2003 Fairchild Semiconductor Corporation Page 5 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 +0.5 -0.0 O62.00.5 2.5 0 0.5 O1801 5 0. 2.5 O12.75 +0.25 -0.0 1.75 Progressive direction 2.00.05 4.0 0.23 O1.55.05 3.84 8.0 3.50.05 (sprocket) 4.0 2.24 3.12 for -7 Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm Polarity marks are on the opposite sprocket side. (c) 2003 Fairchild Semiconductor Corporation Page 6 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-3 Yellow QTLP670C-4 Green QTLP670C-7 AlGaAs Red QTLP670C-B Blue QTLP670C-W White DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. (c) 2003 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 7 of 7 9/3/03