15
ALLIED COMPONENTS INTERNATIONAL
714-665-1140 www.alliedcomponents.com
RoHS
REVISED 01/07/11
*Complete part number by inserting “S” for Standard Temp. or “I” for Industrial Temp. All specifications subject to change without notice.
Unless otherwise specified all tolerances are: ±0.25 in mm
MECHANICAL
10/100 Base-T Ethernet Application
Meets IEEE 802.3 & ANSI X 3.263 standards
Impedance: 100OHMS
Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias
Always EU RoHS/ELV Compliant, wave solder capable to 265°C
RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F
Single Port RJ45 CONNECTOR
WITH INTEGRATED MAGNETICS,TAB DOWN
AR1007-1328_
Standard operating temp: 0ºC to +70ºC (see footnote)
Industrial operating temp: -40ºC to +85ºC (see footnote)
2.54
13.50
8.89
3.05
21.60 Max15.90
LED-RLED-L
3.38
3.5
YELLOWGREEN
Back View
P9 P10 P11 P12
P1
P8
5.08
ALLIED
AR1007-1328_
YYWW
Electrical Specifications @ 25°C
Part
Number
OCL(uH Min)
@ 100kHz, 0.1V Turns Ratio
chip: cable
(±3%)
Insertion Loss
(dB Max) Return Loss
(dB Min)
With 8mA DC Bias 0.5-100MHz 0.5-30MHz 30.1-60MHz 60.1-80MHz
AR1007-1328_ 350 1CT:1CT 1.1 18 18-20*log(f/30) 12
Electrical Specifications @ 25°C
Part
Number EMI
Fingers LED
(L/R)
Cross Talk
(dB Min) CMRR
(dB Min)
0.5-100MHz
HI-POT
(VDC)
0.5-40MHz 40.1-100MHz
AR1007-1328_ YES G/Y 35 33-20*log(f/50) 30 2250
15
ALLIED COMPONENTS INTERNATIONAL
714-665-1140 www.alliedcomponents.com
RoHS
REVISED 01/07/11
Unless otherwise specified all tolerances are: ±0.05 in mm
PCB LAYOUT
SCHEMATICS
AR1007-1328_
AR1007-1328_
Notes:
1. R1-R4=75OHMS,1/16W,5%Resistors.
2. C1=1000pF,2KV Decouping Capacitor.
3. LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA.
4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=5
Single Port RJ45 CONNECTOR
WITH INTEGRATED MAGNETICS,TAB DOWN
P11
P12
YELLOW
P9
P10
GREEN
2KV
1000pF
1CT:1CT
1CT:1CT
MATERIALS
AR1007-1328_
Housing: PBT, Flammability Rating 94V-O.
Shell: C2680 Brass, 0.20mm thick, 50u"Min nickel plating.
Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated.
LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads.
2. 54
3. 05
8. 89
2. 54
7* 1.27 =8.89
1
2
7
8
9
10 12
11
11. 43
15. 49
3. 38
5. 08
7.57
