Features INNOLINE Efficiency up to 96%, no need for heatsinks! Pin-out compatible with LM78XX Linear Regs. Low profile (L*W*H=11.6*8.5*10.4mm) Wide input range (5V ~ 42V) Short circuit protection, thermal shutdown Non-standard outputs available as specials Low ripple and noise See Innoline App Notes for use as a positive-tonegative inverter (alternative to 79xx regulator) DC/DC-Converter with 3 year Warranty 1.0 AMP SIP3 Single Output Description The R-78Cxx-1.0 series switching regulators are ideally suited to replace 1 Amp 78xx linear regulators and are pin compatible. Efficiencies of up to 96% means that very little energy is wasted as heat and the high input voltage is a useful feature. Selection Guide Part Number SIP3 Input Range (V) Output Voltage (V) Output Current (A) Efficiency Min. Vin Max. Vin (%) (%) R-78C1.8-1.0 5 - 42 1.8 1.0 80 71 R-78C3.3-1.0 7 - 42 3.3 1.0 89 79 R-78C5.0-1.0 8 - 42 5 1.0 93 85 R-78C9.0-1.0 12 - 42 9 1.0 95 90 R-78C12-1.0 15 - 42 12 1.0 96 92 R-78C15-1.0 18 - 42 15 1.0 96 94 RoHS 2011/65/EU 6/6 Specifications ( typical at 25C, 10% minimum load, unless otherwise specified ) Conditions All Series All Series All Series All Series Min. Vout+3V 1.8V 0mA* Typ. Max. 42V 15V 1000mA 65mA 1mA Continuous, automatic recovery All Series 2% 3% All Series 0.2% All Series 0.4% 100% <-> 50% load 75mV 100% <-> 10% load 200mV Ripple & Noise (20Mhz BW Limited) Vin = 24V, Vout =1.8V-15V 75mVp-p 100mVp-p With 10F MLCC output capacitor Full Load 30mVp-p Temperature Coefficient -40C ~ +85C ambient 0.015%/C Max capacitance Load with normal start-up time, no external components 470F with <1 second start up time + diode protection circuit 6800F Switching Frequency 280kHz 350kHz 420kHz Operating Temperature Range -40C +85C Maximum Case Temperature +100C Storage Temperature Range -55C +125C Case Thermal Impedance 70C/W Conducted Emissions (with filter) EN55022 Class B Radiated Emissions (with filter) EN55022 Class B ESD EN61000-4-2 Class A Radiated Immunity EN61000-4-3 Class A Package Weight 2g Packing Quantity 42 pcs per Tube Case Material Non-Conductive Black Plastic continued on next page www.recom-power.com REV: 0/2015 IEC/EN-60950-1 Certified R-78C-1.0 Derating-Graph (Ambient Temperature) 120 100 Output Power (%) Characteristics Input Voltage Range Output Voltage Range Output Current Short Circuit Input Current (Vin =24V) No Load Input Current Short Circuit Protection Output Voltage Accuracy (At 100% Load) Line Regulation (100% Load, Vin max.) Load Regulation (10 to 100% full load) Dynamic Load Stability 80 60 40 20 0 Safe Operating Area -40 0 25 50 Operating Temperature (C) 75 68 85 100 Refer to Application Notes I-19 R-78Cxx-1.0 Series INNOLINE DC/DC-Converter Specifications ( typical at 25C, 10% minimum load, unless otherwise specified ) Potting Material IEC/EN General Safety Standby Power Fast Transient Conducted Immunity Magnetic Field Immunity MTBF (+25C) (+68C) Report: SPCLVD 1407030-1 EN61000-4-4 EN61000-4-6 EN61000-4-8 using MIL-HDBK 217F using MIL-HDBK 217F Epoxy (UL94V-0) IEC/ EN-60950-1, 2nd Edition EN62301:2005 Class A Class A Class A 8600 x 10 hours. 3880 x 10 hours. Note: No load operation will not damage these devices, however they may not meet all specifications. A minimum load of 10mA is recommended. Zener Diode Calculation Minimum Zener Breakdown Voltage (VZmin) Voutnom + 3% Accuracy VIN R-78 VOUT R-78C Vout 1.8V (1.85V max.) 3.3V (3.4V max.) 5V (5.15V max.) 9V (9.27V max.) 12V (12.36V max.) 15V (15.45V max.) Zener Voltage, Vz (Vzmin) 2.0V (1.90V) 3.6V (3.42V) 5.6V (5.32V) 10V (9.50V) 13V (12.35V) / 14V (13.30V) 17V (16.15V) Recomended Zener Diode MMSZ679T1G MMSZ4685T1G MMSZ4690T1G MMSZ4697T1G MMSZ4700T1G / MMSZ4701T1G MMSZ4704T1G Application Examples High efficiency regulated outputs +5VDC REC3-0512DRW/H2/A +12VDC R-78C5.0-1.0 +Vin Com R-78C C1 C2 -12VDC -Vin C1: Optional , C2 : Required (further decoupling filtering may be necessary between the two converters) - Triple Outputs - Wide input range 8V to 42V - High System Efficiency, Suitable for 12V, 24V or 36V Battery Powered Devices Standard Application Circuit R-78C5.0-1.0 +Vin +24VDC unreg. (27~40VDC) +Vout C1 (Optional) Com Low Voltage AC input, regulated DC output C2 (Optional) 10F MLCC Use soft start supply 24VAC +/-20% Com ~ + ~ - +5V reg. R-78C5.0-1.0 C1 C2 - Low Voltage AC Input - Regulated and Protected DC Output C2 : optional Com Package Style and Pinning (mm) 8.50 SIP3 PIN Package RECOM 10.40 R-78C5.0-1.0 0.51 typ. **** Pb Front 1 2 3 0.70 1.0 4.10 Recommended Footprint Details 1.00 o+0.15/0 11.60 0.25 Bottom View 3.21 5.08 RECOM R-78C5.0-1.0 **** Pb 2.54 2.0 Top View 2.54 Pin Connections Pin # 1 2 3 xx.x 0.5mm xx.xx 0.25mm +Vin GND +Vout The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. I-20 REV: 0/2015 www.recom-power.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: R-78C5.0-1.0 R-78C1.8-1.0 R-78C12-1.0 R-78C15-1.0 R-78C3.3-1.0 R-78C9.0-1.0