Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Overview KEMET's Goldmax conformally coated radial through-hole ceramic capacitors in X8L dielectric feature a +150C maximum operating temperature and is considered "general purpose high temperature". These components are fixed, ceramic dielectric capacitors that are suited for high temperature bypass and decoupling applications or frequency discriminating circuits, where Q and stability of capacitance characteristics are not critical. X8L exhibits a predictable change in capacitance with respect to time and voltage, and boasts a minimal change in capacitance with reference to ambient temperature up to +125C. Beyond +125C X8L displays a wider variation in capacitance. Capacitance change is limited to 15% from -55C to +125C and +15, -40% from +125C to +150C. Driven by the demand for a more robust and reliable component, X8L dielectric capacitors were developed for critical applications where reliability at higher operating temperatures are a concern. These capacitors are widely used in automotive circuits as well as general high temperature applications. In addition to commercial grade, automotive grade devices are available and meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements. These devices meet the flame test requirements outlined in UL Standard 94V-0. Benefits * Radial through-hole form factor * Conformally coated * Operating temperature range of -55C to +150C * Lead (Pb)-Free, RoHS and REACH compliant Click image above for interactive 3D content Ordering Information Open PDF in Adobe Reader for full functionality C 320 C 475 K 3 N 5 T A 7301 Ceramic Style/Size Specification/ Series Capacitance Code (pF) Capacitance Tolerance1 Rated Voltage (VDC) Dielectric Design Lead Finish Failure Rate Packaging (C-Spec) N= X8L 5= Multilayer A= N/A See "Packaging C-Spec Ordering Options Table" below 315 316 317 318 320 321 322 323 324 325 326 327 328 C= Standard First two digits J = 5% represent K = 10% significant M = 20% figures. Third digit specifies number of zeros. 3 = 25 5 = 50 T = 100% Matte Sn H = SnPb (60/40) Additional capacitance tolerance offerings may be available. Contact KEMET for details. For overmolding applications please contact your KEMET representative. 1 One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 1 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Benefits cont'd * DC voltage ratings of 25 and 50 V * Capacitance offerings ranging from 0.15 F up to 4.7 F * Available capacitance tolerances of 5%, 10% & 20% * Commercial and Automotive (AEC-Q200) grades available * Non-polar device, minimizing installation concerns * 100% pure matte tin-plated lead finish allowing for excellent solderability * SnPb-plated lead finish option available upon request (60/40) * Encapsulation meets flammability standard UL 94V-0 Applications Typical applications include use in extreme environments, such as down-hole oil exploration, under-hood automotive, military and aerospace. Application Notes These devices are not recommended for use in overmold applications and/or processes. Packaging C-Spec Ordering Options Table Packaging/Grade Ordering Code (C-Spec) Packaging Type1 Commercial Grade Bulk Bag 12" Tape & Reel (16.00.5 mm lead length) 12" Tape & Reel (18.0 mm minimum lead length) Ammo Pack (16.00.5 mm lead length) Ammo Pack (18.0 mm minimum lead length) Not required (Blank) 7301 7303 7305 7317 Automotive Grade Bulk Bag Automotive Grade 12" Tape & Reel (16.00.5 mm lead length) 12" Tape & Reel (18.0 mm minimum lead length) Ammo Pack (16.00.5 mm lead length) Ammo Pack (18.0 mm minimum lead length) 1 9170 9170 7301 9170 7303 9170 7305 9170 7317 Bulk bag option is required for Size/Style C321 and C331. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 2 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Dimensions - Inches (Millimeters) Shoulder Bend (Short) L C317 C321 C322 T Shoulder Bend (Tall) L C318 C323 C328 H Seating Plane F F S L T LL LL F S L C324 H All Others: 0.06 max (1.52 mm) Snap-In Type 2 H T C315 C320 S Outside Kink C316 C326 C327 L C340: 0.10 max (2.54 mm) H Seating Plane LL Straight T T Snap-In Type 1 L T C325 H H Seating Plane Seating Plane F LL C31X C32X C31X C32X 1 F Style / Size 315 316 324 320 326 317 318 321 322 323 325 328 327 LL F S E S E Series Seating Plane LL S Lead Spacing 0.030 (0.78) 0.100 (2.54) 0.200 (5.08) 0.250 (6.35) 0.200 (5.08) S * May be supplied in a "Shoulder Bend" or "Straight" Lead configuration. Please see Capacitance Range Waterfall section of this document to determine lead configuration availability by capacitance value. L Length Maximum H Height Maximum T Thickness Maximum 0.150 (3.81) 0.150 (3.81) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.150 (3.81) 0.150 (3.81) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.120 (3.14) 0.230 (5.08) 0.230 (5.84) 0.230 (5.84) 0.300 (7.62) 0.200 (5.08) 0.235 (5.97) 0.260 (6.60) 0.260 (6.60) 0.300 (7.62) 0.300 (7.62) 0.300 (7.62) 0.320 (8.13) 0.100 (2.54) 0.100 (2.54) 0.125 (3.18)1 0.125 (3.18)1 0.125 (3.18)1 0.100 (2.54) 0.100 (2.54) 0.125 (3.18)1 0.125 (3.18)1 0.125 (3.18)1 0.125 (3.18)1 0.125 (3.18)1 0.125 (3.18)1 F Lead Diameter +0.004 (0.10), -0.001 (0.025) LL Lead Length Minimum 0.020 (0.51) 0.276 (7.00) 0.200 (5.08) 0.276 (7.00) 0.276 (7.00) 0.200 (5.08) 0.276 (7.00) 0.276 (7.00) 0.276 (7.00) 0.276 (7.00) 0.276 (7.00) 0.276 (7.00) 0.276 (7.00) 0.200 (5.08) Thickness maximum (T) = 0.160" (4.07 mm) for capacitance values greater than or equal to 4.7 F (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 3 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Automotive C-Spec Information KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. The details regarding test methods and conditions are referenced in the document AEC-Q200, Stress Test Qualification for Passive Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval Process warrant (PPAP). Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, "9170." This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade component, without the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET's OEM Automotive customers and are not granted the same "privileges" as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited (see details below). Product Change Notification (PCN) The KEMET Product Change Notification system is used to communicate primarily the following types of changes: * Product/process changes that affect product form, fit, function, and/or reliability * Changes in manufacturing site * Product obsolescence Process/Product change Obsolescence* Days prior to implementation KEMET assigned Yes (with approval and sign off) Yes 180 days Minimum 9170 Yes (without approval) Yes 90 days Minimum 1 1 Customer Notification due to: KEMET Automotive C-Spec KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. Production Part Approval Process (PPAP) The purpose of the Production Part Approval Process is: * To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. * To provide the evidence that all customer engineering design record and specification requirements are properly understood and fulfilled by the manufacturing organization. * To demonstrate that the established manufacturing process has the potential to produce the part 1 2 3 4 5 KEMET assigned 9170 1 1 PPAP (Product Part Approval Process) Level KEMET Automotive C-Spec KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. Part Number specific PPAP available Product family PPAP only (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 4 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 2, Performance & Reliability. Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit their website at www.aecouncil.com. Environmental Compliance Lead (Pb)-free, REACH and RoHS compliant without exemptions when ordered with a 100% tin (Sn) wire lead finish. Product ordered with tin/ lead (Sn60/Pb40) wire lead finish do not meet RoHS criteria. Series 300 (C3XX) 1 Termination Finish (Wire Lead) RoHS Compliant RoHS Exemption Code REACH Compliant1 Halogen Free 100% Matte Sn Yes n/a Yes Yes Sn60/Pb40 No n/a Yes Yes REACH compliance indicates product does not contain Substance/s of Very High Concern (SVHC (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 5 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range: Capacitance Change with Reference to +25C and 0 VDC Applied (TCC): Aging Rate (Maximum % Cap Loss/Decade Hour): Dielectric Withstanding Voltage: Dissipation Factor (DF) Maximum Limit at +25C: Insulation Resistance (IR) Limit at +25C: -55C to +150C 15%(-55C to +125C) +15%, -40% (+125C to +150C) 3.0% 250% of rated voltage (51 seconds and charge/discharge not exceeding 50 mA at +25C) 2.5% 1,000 megohm microfarads or 100 G (Rated voltage applied for 1205 seconds at +25C) To obtain IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Capacitance and dissipation factor (DF) measured under the following conditions: 1 MHz 100 kHz and 1.0 Vrms 0.2 V if capacitance 1,000 pF 1 kHz 50 Hz and 1.0 Vrms 0.2 V if capacitance > 1,000 pF Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." Post Environmental Limits High Temperature Life, Biased Humidity and Storage Life Dielectric Rated DC Voltage Capacitance Value DF (%) Capacitance Shift IR X8L 25 50 All 5.0 3.0 20% 10% of initial limit (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 6 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Table 1A - C31X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall C315, C316, C317, C318 Style/Size (0.100" & 0.200" Lead Spacing) Rated Voltage (VDC) 25 50 Voltage Code 3 5 Capacitance 0.15F 0.18F 0.22F 0.27F 0.33F 0.39F 0.47F 0.56F 0.68F Capacitance Tolerance Capacitance Code (Available Capacitance) 154 184 224 274 334 394 474 564 684 154 184 224 Rated Voltage (VDC) 25 50 Voltage Code 3 5 J = 5% K = 10% M = 20% Table 1B - C32X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall C320, C322, C323, C326, C328 Style/Size (0.100" & 0.200" Lead Spacing) Rated Voltage (VDC) 25 50 Voltage Code 3 5 Capacitance 0.15F 0.18F 0.22F 0.27F 0.33F 0.39F 0.47F 0.56F 0.68F 0.82F 1.0F 1.2F 1.5F 1.8F 2.2F 2.7F 3.3F 3.9F 4.7F Capacitance Tolerance J = 5% K = 10% M = 20% Capacitance Code (Available Capacitance) 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 154 184 224 394 474 564 684 824 105 Rated Voltage (VDC) 25 50 Voltage Code 3 5 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 7 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Table 1C - C32X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall C321, C324, C325, C327 Style/Size (0.100" & 0.200" Lead Spacing) Rated Voltage (VDC) 25 50 Voltage Code 3 5 Capacitance 0.39F 0.47F 0.56F 0.68F 0.82F 1.0F 1.2F 1.5F 1.8F 2.2F 2.7F 3.3F 3.9F 4.7F Capacitance Tolerance Capacitance Code (Available Capacitance) 394 474 564 684 824 105 125 155 185 225 275 335 395 475 394 474 564 684 824 105 Rated Voltage (VDC) 25 50 Voltage Code 3 5 J = 5% K = 10% M = 20% (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 8 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Soldering Process Recommended Soldering Methods: * Solder Wave * Hand Soldering (Manual) Recommended Soldering Profile: * Optimum Wave Solder Profile Solder Wave Peak Temperature 260C Entrance to Solder Wave Degrees - C Flux Zone 250 225 200 175 150 125 100 75 50 25 Exit from Solder Wave (Time in Wave - 2 to 4 Seconds) Preheat Zone Hot Air Debridging Exit from Solder Machine 80C to 120C Entrance to Solder Machine Free Air Cool Bottom Side Temperature Range Entrance to In-Line Cleaner Exit from In-Line Cleaner (time in cleaner may be less) Immersion in Cleaning Vapor 150C Maximum Top Side Nominal 0 1 2 3 Time (Minutes) 4 5 6 Mounting All encased capacitors will pass the Resistance to Soldering Heat of MIL-STD-202, Method 210, Condition B. This test simulates wave solder topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded ceramic capacitors. * Hand Soldering (Manual) Manual Solder Profile with Pre-heating Soldering Gradual Cooling Gradual Preheat 60 - 120 Seconds Recommend 2.5C/second Maximum 3 seconds Delta T < = 120C (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 9 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Table 2 - Performance & Reliability: Test Methods and Conditions Stress Reference Solderability J-STD-002 Temperature Cycling JESD22 Method JA-104 Biased Humidity MIL-STD-202 Method 103 Moisture Resistance Thermal Shock High Temperature Life Storage Life Vibration Resistance to Soldering Heat Terminal Strength Mechanical Shock Resistance to Solvents MIL-STD-202 Method 106 MIL-STD-202 Method 107 MIL-STD-202 Method 108/EIA-198 MIL-STD-202 Method 108 MIL-STD-202 Method 204 MIL-STD-202 Method 210 MIL-STD-202 Method 211 MIL-STD-202 Method 213 MIL-STD-202 Method 215 Test or Inspection Method Magnification 50X. Conditions: a) Method A, at 235C, Category 3 5 cycles (-55C to +125C), measurement at 24 hours +/-4 hours after test conclusion. Load humidity, 1,000 hours 85C/85%RH and rated voltage. Add 100 K ohm resistor. Measurement at 24 hours +/-4 hours after test conclusion. Low volt humidity, 1,000 hours 85C/85%RH and 1.5 V. Add 100 K ohm resistor. Measurement at 24 hours +/-4 hours after test conclusion. t = 24 hours/cycle. Steps 7a & 7b not required. Unpowered. Measurement at 24 hours +/-4 hours after test conclusion. -55C to +125C. Note: Number of cycles required - 300. Maximum transfer time - 20 seconds. Dwell time - 15 minutes. Air - Air. 1,000 hours at 125C (85C for Z5U) with 1 X rated voltage applied. 125C, 0 VDC for 1,000 hours. 5 g for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8"X5" PCB .031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10-2000 Hz. Condition B. No preheat of samples. Note: single wave solder - procedure 2. Conditions A (454g), Condition C (227g) Figure 1 of Method 213, Condition C. Add aqueous wash chemical - OKEM Clean or equivalent. Storage & Handling The un-mounted storage life of a leaded ceramic capacitor is dependent upon storage and atmospheric conditions as well as packaging materials. While the ceramic chips enveloped under the epoxy coating themselves are quite robust in most environments, solderability of the wire lead on the final epoxy-coated product will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature and exposure to direct sunlight - reels may soften or warp, and tape peel force may increase. KEMET recommends storing the un-mounted capacitors in their original packaging, in a location away from direct sunlight, and where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. For optimum solderability, capacitor stock should be used promptly, preferably within 18 months of receipt. For applications requiring pre-tinning of components, storage life may be extended if solderability is verified. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 10 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Construction Epoxy Encapsulation Finish Layer (Sn) Detailed Cross Section Barrier Layer (Ni) Base Metal (Cu) Lead Attach Solder (95Sn/5Ag) Lead Attach Solder (95Sn/5Ag) Dielectric Material (BaTiO3) Inner Electrodes (Ni) Base Metal (Cu) Finish Layer (Sn) Barrier Layer (Ni) Core Metal Barrier Layer Lead Wire Std Alt 1 Steel Cu Ni 100% 60% Sn Finish Layer Matte Sn 40% Pb Alt 2 Cu -- 60% Sn 40% Pb Inner Electrodes (Ni) Epoxy Encapsulation Marking STYLE/SIZE C31X, C32X KEMET ID Capacitance Tolerance Code Rated Capacitance Code Rated Voltage Code Front Back To properly request the inclusion of the date code in the marking ordering code please contact your KEMET representative. 1 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 11 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Packaging Quantities Style/ Size 315 316 317 318 320 321 322 323 324 325 326 327 328 Standard Bulk Quantity Ammo Pack Quantity Maximum Reel Quantity Maximum (12" Reel) 2,500 2,500 N/A N/A 2,500 2,500 500/Bag (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 12 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Tape & Reel Packaging Information KEMET offers standard reeling of Molded and Conformally Coated Radial Leaded Capacitors in accordance with EIA standard 468. Parts are taped to a tagboard carrier strip, and wound on a reel as shown in Figure 1. Kraft paper interleaving is inserted between the layers of capacitors on the reel. Ammopack is also available, with the same lead tape configuration and package quantities. P H1 D0 H P2 H 1mm Maximum (0.039") W2 P1 H0 W0 F W Carrier L1 T Tape P0 Ceramic Radial Tape and Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) D0 0.2 (0.008) P0 0.3 (0.012) H 0.2 (0.008) L1 Maximum t 0.2 (0.008) T Maximum W +1.0/-0.5 (+0.039/-0.020) W0 Minimum W2 Maximum 4.00 (0.157) 12.7 (0.500) 4.0 (0.157) 1.0 (0.039) 0.7 (0.051) 1.5 (0.059) 18.0 (0.709) 5.0 (0.197) 3.0 (0.118) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 13 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) Ceramic Radial Tape and Reel Dimensions cont'd Metric will govern Variable Dimensions -- Millimeters (Inches) F 0.78 (0.030)1 P1 0.30 (0.012)1 P 0.3 (0.012) P2 1.3 (0.51) 2.54 (0.100) 5.08 (0.200) 12.7 (0.500) 6.35 (0.250) 4.32 (0.170) 3.89 (0.153) 12.7 (0.500) 6.35 (0.250) 5.08 (0.200) 3.81 (0.150) 12.7 (0.500) 6.35 (0.250) 5.59 (0.220) 3.25 (0.128) 12.7 (0.500) 6.35 (0.250) 6.98 (0.275) 2.54 (0.100) 12.7 (0.500) 6.35 (0.250) 7.62 (0.300) 2.24 (0.088) 12.7 (0.500) 6.35 (0.250) 9.52 (0.375) 7.62 (0.300) 12.7 (0.500) 6.35 (0.250) 10.16 (0.400) 7.34 (0.290) 25.4 (1.000) N/A 12.06 (0.475) 6.35 (0.250) 25.4 (1.000) N/A 14.60 (0.575) 5.08 (0.200) 25.4 (1.000) N/A 17.14 (0.675) 3.81 (0.15) 25.4 (1.000) N/A H H0 Straight Lead Configuration Formed Lead Configuration2 Packaging C-Spec3 7301/7305 7303/7317 7301/7305 7303/7317 16.00.5 (0.6300.020) 18.0 (0.709) Minimum 16.00.5 (0.6300.020) 18.0 (0.709) Minimum Measured at the egress from the carrier tape, on the component side. Formed lead configuration includes: "shoulder bend", "inside kink", "outside kink", and "snap-in". For more information regarding available lead configurations see "Dimensions" section of this document. 3 The "Packaging C-Spec" is a 4 digit code which identifies the packaging type, lead length and/or lead material. When ordering, the proper code must be included in the 15th through 18th character positions of the ordering code. See "Ordering Information" section of this document for further details. 1 2 Symbol Reference Table D0 P0 P F P1 P2 H H0 H1 H L1 t W W0 W2 Sprocket Hole Diameter Sprocket Hole Pitch Component Pitch Lead Spacing Sprocket Hole Center to Lead Center Sprocket Hole Center To Component Center Height to Seating Plane (Straight Leads Only) Height to Seating Plane (Formed Leads Only) Component Height Above Tape Center Component Alignment Lead Protrusion Composite Tape Thickness Carrier Tape Width Hold-Down Tape Width Hold-Down Tape Location (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 14 Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 - 50 VDC (Commercial and Automotive Grade) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1093_GOLDMAX_X8L * 4/7/2017 15