SCOPE: Dual Mode, +5V/Programmable Micropower Voltage Regulator Device Type 01 02 03 Generic Number MAX663M(x)/883B MAX664M(x)/883B MAX666M(x)/883B SMD Ordering Information 5962-9212601MPA 5962-9212602MPA 5962-9212603MPA Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter Mil-Std-1835 Case Outline Package Code MAXIM SMD JA P GDIP1-T8 or CDIP2-T8 8 LEAD CERDIP J8 Absolute Maximum Ratings Input Supply Voltage Device 01 & 03 ................................................................... +18V Input Supply Voltage Device 02 ..............................................................................-18V Terminal Voltage Range: Device 01 (Sense, VOUT1, Shutdown, VSET, VTC)...................GND -0.3V to (VIN+0.3V) Device 01 (VOUT2)..............................................................GND -0.3V to (VOUT1+0.3V) Device 02 (VOUT, Shutdown1, Shutdown2, VSET, VOUT1) ......................VIN -0.3V to (GND+0.3V) Device 02 (SENSE)...............................................................VIN -0.3V to (VOUT1+0.3V) Device 03 (Sense, VOUT, LBI, Shutdown, VSET)................... (GND -0.3V) to VIN+0.3V Device 03 (LBO)...................................................................... (GND -0.3V) to +16.5V Output Source Current: Device 01 (VOUT2) .................................................................................................50mA Device 01 (VOUT1) .................................................................................................25mA Device 03 (VOUT) ...................................................................................................50mA Output Sink Current: Device 01 (VTC) ................................................................................................. -20mA Device 02 (VOUT1, VOUT2) ................................................................................... -25mA Device 03 (LBO) .............................................................................................. -20mA Lead Temperature (soldering, 10 seconds) ............................................................... +300C Storage Temperature .................................................................................. -65C to +150C Continuous Power Dissipation ..............................................................................TA=+70C 8 lead CERDIP(derate 8.0mW/C above +70C) .................................................... 640mW Junction Temperature TJ ....................................................................................... +150C Thermal Resistance, Junction to Case, JC: .......................................................... 55C/W Thermal Resistance, Junction to Ambient, JA: .................................................. 125C/W Recommended Operating Conditions. Ambient Operating Range (TA) .............................................................. -55C to +125C Input Voltage Range: Device 01 & 03 ................................................................................ +2.2V to +16.5V Device 02 ........................................................................................... -2.2V to -16.5V Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ---------------------------- Electrical Characteristics of MAX663/664/666 /883B for /883B and SMD 5962-92126 19-0073 Page 2 of Rev. C 8 TABLE 1 ELECTRICAL TESTS PARAMETER Quiescent Current Symbol CONDITIONS 1/ -55 C <=TA<= +125C Unless otherwise specified VIN=16.5V, no external load IQ VIN=-16.5V, no external load Output Voltage VOUT VSET=GND, IOUT=1mA +2.0VVIN+15.0V, VOUT=VSET Line Regulation Load Regulation VRLINE VRLOAD +2.2VVIN+15.0V, VOUT=VSET Group A Subgroup Device type Limits Min 2/ 1 2,3 01,03 1 2,3 02 1 2,3 01,03 4.75 4.50 1 2,3 02 -5.25 -5.50 1 01,03 2,3 01,03 Limits Max Units 12 20 A 12 20 5.25 5.50 V -4.75 -4.50 .35 .60 %/V -15.0VVIN-2.0V, VOUT=VSET 1 02 -15.0VVIN-2.2V, VOUT=VSET 2,3 02 50AIOUT15.0mA 1 2,3 01 -25 -50 +25 +50 1mAIOUT220.0mA 1 2,3 01 -135 -285 +135 +285 1mAIOUT115.0mA, VOUT2 connected to VOUT1 1 2,3 02 -70 -140 +70 +140 1mAIOUT20.0mA 1 2,3 1 2,3 03 -135 -285 1.27 1.21 +135 +285 1.33 1.39 -1.33 -1.39 -10 -25 -1.27 -1.21 +10 +25 -10 -25 1.4 1.5 +10 +25 .35 .60 mV Reference Voltage VSET 02 01,03 nA VSHDNHI= Output OFF 1 2,3 1 2,3 02 01,03 V VSHDN VSHDNHI=Output OFF VSHDNLO= Output ON Shutdown Input Voltage 1 2,3 1 2,3 ISET VSET=0V, -2V Shutdown Input Voltage V VOUT=VSET, IOUT=1mA VSET=0V, 2V VSET Input Current 01,03 1 2,3 1 2,3 -1.4 -1.5 0.3 0.2 02 01,03 V VSHDN ---------------------------- VSHDNLO=Output ON 1 2,3 Electrical Characteristics of MAX663/664/666 /883B for /883B and SMD 5962-92126 02 -0.3 -0.2 19-0073 Page 3 of Rev. C 8 PARAMETER Symbol Shutdown Input Current ISHDN Output Current NOTE 3 IOUT CONDITIONS -55 C <=TA<= +125C Unless otherwise specified VSHDN= 0V, 9V 1/ Group A Subgroup 1 2,3 Device type 01,03 Limits Min 2/ -10 -25 Limits Max +10 +25 nA VSET=0V, -9V VIN=2.5V, VIN-VOUT=1.5V 1 2,3 1 -10 -25 40 02 +10 +25 01,03 VIN=3.0V, VIN-VOUT=2.0V mA 20 1.21 1.20 -10 -25 LBI Input Threshold Voltage LBI Input Current VLBI ILBI VLBI=0V, 9V Input/Output Saturation Resistance RSAT VIN=2.0V, IOUT1=1.0mA 2,3 1 2,3 1 2,3 1 VIN=2.2V, IOUT1=1.0mA 2,3 1000 VIN=9.0V, IOUT1=2.0mA 1 2,3 150 300 VIN=15.0V, IOUT1=5.0mA 1 2,3 1 150 300 500 Input/Output Saturation Resistance Minimum Load Current RSAT VIN=-2.0V, IOUT1=-1.0mA, VOUT1 connected to VOUT2 03 03 01 02 1.37 1.38 +10 +25 500 VIN=-2.2V, IOUT1=-1.0mA, VOUT1 connected to VOUT2 2,3 1000 VIN=-9.0V, IOUT1=-2.0mA VOUT2 connected to VOUT1 1 2,3 80 150 VIN=-15.0V, IOUT1=-5.0mA VOUT2 connected to VOUT1 1 2,3 1 60 150 1 IL(min) 01,03 02 2,3 01,03 02 LBO Output Saturation Resistance VCT Sink Current VCT Voltage ROSAT ISAT=2mA, VLBI=0V 1 2,3 03 ITC VTC NOTE 4 NOTE 4, ITC=50A 01 01 LBO Output Leakage Current ILBO VLBI=1.4V, VLBO=9V 1,2,3 1 2,3 1,2,3 Electrical Characteristics of MAX663/664/666 /883B for /883B and SMD 5962-92126 V nA -1 A 10 -10 0.6 0.2 03 100 200 2 1.0 1.4 2 mA V NOTE 1: Unless otherwise specified: VIN=+9V and VOUT=+5.0V for device types 01 and 03. VIN=-9V and VOUT=-5.0V for device type 02. ---------------------------- Units 19-0073 Page 4 of Rev. C 8 A NOTE 2: The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this table. Negative current shall be defined as conventional current flow out of a device terminal. NOTE 3: VIN-VOUT is given as a maximum differential voltage under specified output current conditions. For device type 01, output current is from VOUT2. NOTE 4: Output has a positive temperature coefficient. Using it in conjunction with the input of the regulator at VSET, a negative coefficient results in the output voltage. The VTC pin will not source current. TERMINAL NUMBER 1 2 3 4 5 6 7 8 01 MAX663 Sense VOUT2 VOUT1 GND SHDN VSET VTC VIN (+) 02 MAX664 VOUT2 Sense SHDN VIN (-) SHDN VSET VOUT1 GND ---------------------------- 03 MAX666 Sense VOUT LBI GND SHDN VSET LBO VIN(+) Electrical Characteristics of MAX663/664/666 /883B for /883B and SMD 5962-92126 19-0073 Page 5 of Rev. C 8 19-0073 Page 6 of Rev. C 8 BLOCK DIAGRAMS: DEVICE TYPE 01: See New Release Data Book 1992 4-128. DEVICE TYPE 02: See New Release Data Book 1992 4-129. DEVICE TYPE 03: See New Release Data Book 1992 4-129. ---------------------------- Electrical Characteristics of MAX663/664/666 /883B for /883B and SMD 5962-92126 QUALITY ASSURANCE Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in MilStd-883. Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015: 1. Test Condition, A, B, C, or D. 2. TA = +125C minimum. 3. Interim and final electrical test requirements shall be specified in Table 2. Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B, C, and D inspection. Group A inspection: 1. Tests as specified in Table 2. 2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted. Group C and D inspections: a. End-point electrical parameters shall be specified in Table 1. b. Steady-state life test, Method 1005 of Mil-Std-883: 1. Test condition A, B, C, D. 2. TA = +125C, minimum. 3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883. TABLE 2. ELECTRICAL TEST REQUIREMENTS Mil-Std-883 Test Requirements Interim Electric Parameters Method 5004 Final Electrical Parameters Method 5005 Group A Test Requirements Method 5005 Group C and D End-Point Electrical Parameters Method 5005 * Subgroups per Method 5005, Table 1 1 1*, 2, 3 1, 2, 3 1 PDA applies to Subgroup 1 only. ---------------------------- Electrical Characteristics of MAX663/664/666 /883B for /883B and SMD 5962-92126 19-0073 Page 7 of Rev. C 8