BTA30-600CW3G, BTA30-800CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. http://onsemi.com Features * * * * * * * * * TRIACS 30 AMPERES RMS 600 thru 800 VOLTS Blocking Voltage to 800 Volts On-State Current Rating of 30 Amperes RMS at 95C Uniform Gate Trigger Currents in Three Quadrants High Immunity to dV/dt - 500 V/ms minimum at 125C Minimizes Snubber Networks for Protection Industry Standard TO-220AB Package - Internally Isolated High Commutating dI/dt - 4.0 A/ms minimum at 125C Internally Isolated (2500 VRMS) These are Pb-Free Devices MT2 MT1 G MARKING DIAGRAM 4 MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Rating Symbol Peak Repetitive Off-State Voltage (Note 1) (TJ = -40 to 125C, Sine Wave, 50 to 60 Hz, Gate Open) BTA30-600CW3G BTA30-800CW3G VDRM, VRRM On-State RMS Current (Full Cycle Sine Wave, 60 Hz, TC = 95C) IT(RMS) 30 A ITSM 400 A I2t 667 A2sec VDSM/ VRSM VDRM/VRRM +100 V IGM 4.0 A PG(AV) 0.5 W Operating Junction Temperature Range TJ -40 to +125 C Storage Temperature Range Tstg -40 to +150 C RMS Isolation Voltage (t = 300 ms, R.H. 30%, TA = 25C) Viso 2500 V Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TJ(initial) = 25C) Circuit Fusing Consideration (t = 8.3 ms) Non-Repetitive Surge Peak Off-State Voltage (TJ = 25C, t = 8.3 ms) Peak Gate Current (TJ = 125C, t 20 ms) Average Gate Power (TJ = 125C) Value Unit V 1 600 800 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. BTA30-xCWG AYWW 3 TO-220AB CASE 221A STYLE 12 x A Y WW G = 6 or 8 = Assembly Location = Year = Work Week = Pb-Free Package 2 PIN ASSIGNMENT 1 Main Terminal 1 2 Main Terminal 2 3 Gate 4 No Connection ORDERING INFORMATION Device Package Shipping BTA30-600CW3G TO-220AB (Pb-Free) 50 Units / Rail BTA30-800CW3G TO-220AB (Pb-Free) 50 Units / Rail *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2010 October, 2010 - Rev. 1 1 Publication Order Number: BTA30-600CW3/D BTA30-600CW3G, BTA30-800CW3G THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Case (AC) Junction-to-Ambient Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 seconds Symbol Value Unit RqJC RqJA 1.8 60 C/W TL 260 C ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted; Electricals apply in both directions) Symbol Min Typ Max - - - - 0.005 3 - - 1.55 - - - - - - 35 35 35 - - 50 - - - - - - 75 75 75 - - - - - - 1.3 1.3 1.3 0.15 0.15 0.15 - - - - - - (dI/dt)c 4.0 - - A/ms Critical Rate of Rise of On-State Current (TJ = 125C, f = 120 Hz, IG = 70 mA, tr 100 ns) dI/dt - - 50 A/ms Critical Rate of Rise of Off-State Voltage (VD = 0.66 x VDRM, Exponential Waveform, Gate Open, TJ = 125C) dV/dt 500 - - V/ms Characteristic Unit OFF CHARACTERISTICS Peak Repetitive Blocking Current (VD = Rated VDRM, VRRM; Gate Open) TJ = 25C TJ = 125C IDRM, IRRM mA ON CHARACTERISTICS Peak On-State Voltage (Note 2) (ITM = 42 A Peak) VTM Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 30 W) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) IGT Holding Current (VD = 12 V, Gate Open, Initiating Current = 100 mA) IH Latching Current (VD = 12 V, IG = 42 mA) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) IL Gate Trigger Voltage (VD = 12 V, RL = 30 W) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) VGT Gate Non-Trigger Voltage (TJ = 125C) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) VGD V mA mA mA V V DYNAMIC CHARACTERISTICS Rate of Change of Commutating Current, See Figure 10. (Gate Open, TJ = 125C, No Snubber) 2. Indicates Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. http://onsemi.com 2 BTA30-600CW3G, BTA30-800CW3G Voltage Current Characteristic of Triacs (Bidirectional Device) + Current Symbol Parameter VTM VDRM Peak Repetitive Forward Off State Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Reverse Off State Voltage IRRM Peak Reverse Blocking Current VTM Maximum On State Voltage IH Holding Current on state IRRM at VRRM IH Quadrant 3 MainTerminal 2 - IH off state VTM Quadrant Definitions for a Triac MT2 POSITIVE (Positive Half Cycle) + (+) MT2 Quadrant II (+) MT2 (-) IGT GATE Quadrant I (+) IGT GATE MT1 MT1 REF REF IGT - + IGT (-) MT2 Quadrant III (-) MT2 Quadrant IV (+) IGT GATE (-) IGT GATE MT1 MT1 REF REF - MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used. http://onsemi.com 3 Quadrant 1 MainTerminal 2 + + Voltage IDRM at VDRM BTA30-600CW3G, BTA30-800CW3G 120 35 PAV, AVERAGE POWER (W) 40 TC, CASE TEMPERATURE (C) 125 115 110 105 100 95 90 85 80 0 5 10 15 20 25 IT(RMS), RMS ON-STATE CURRENT (A) 30 25 20 15 10 5 0 30 0 1000 100 30 1 0.1 0.01 0.1 1 10 100 t, TIME (ms) 1000 1*104 Figure 4. Thermal Response 10 35 IH, HOLDING CURRENT (mA) IT, INSTANTANEOUS ON-STATE CURRENT (A) 10 15 20 25 IT(RMS), ON-STATE CURRENT (A) Figure 2. On-State Power Dissipation r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 1. RMS Current Derating 5 TJ = 125C TJ = 25C 1 0.1 0 30 25 MT2 NEGATIVE 20 15 MT2 POSITIVE 10 5 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 TJ, JUNCTION TEMPERATURE (C) 0.5 1.0 1.5 2.0 2.5 3.0 VT, INSTANTANEOUS ON-STATE VOLTAGE (V) Figure 3. On-State Typical Characteristics Figure 5. Holding Current Variation http://onsemi.com 4 25 1.3 20 VGT, GATE TRIGGER VOLTAGE (V) IGT, GATE TRIGGER CURRENT (mA) BTA30-600CW3G, BTA30-800CW3G VD = 12 V RI = 30 W Q3 Q1 15 Q2 10 5 0 -40 -25 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) 110 125 1.1 0.9 Q3 0.7 Q2 0.5 0.3 0.1 -40 -25 -10 5 20 35 50 65 80 95 110 125 TJ, JUNCTION TEMPERATURE (C) Figure 7. Gate Trigger Voltage Variation 80 5000 IL, LATCHING CURRENT (mA) VD = 800 Vpk TJ = 125C 4K 3K 2K 1K 10 100 1000 RG, GATE TO MAIN TERMINAL 1 RESISTANCE (OHMS) 10000 VD = 12 V RI = 30 W 70 60 Q2 Q1 50 Q3 40 30 20 -40 -25 -10 5 20 35 50 65 80 95 110 125 TJ, JUNCTION TEMPERATURE (C) Figure 8. Critical Rate of Rise of Off-State Voltage (Exponential Waveform) Figure 9. Latching Current Variation LL 200 VRMS ADJUST FOR ITM, 60 Hz VAC CHARGE 1N4007 MEASURE I TRIGGER TRIGGER CONTROL dv/dt , CRITICAL RATE OF RISE OF OFFSTATE VOLTAGE (V/ s) Figure 6. Gate Trigger Current Variation 0 VD = 12 V RI = 30 W Q1 CHARGE CONTROL NONPOLAR CL + 200 V MT2 1N914 51 W MT1 G Note: Component values are for verification of rated (di/dt)c. See AN1048 for additional information. Figure 10. Simplified Test Circuit to Measure the Critical Rate of Rise of Commutating Current (di/dt)c http://onsemi.com 5 BTA30-600CW3G, BTA30-800CW3G PACKAGE DIMENSIONS TO-220 CASE 221A-07 ISSUE AA -T- B F 4 Q T SEATING PLANE C S A U 1 2 3 H K Z R L V J G D N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 12: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 MAIN TERMINAL 1 MAIN TERMINAL 2 GATE NOT CONNECTED ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BTA30-600CW3/D