Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Document Number: 45127 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 20-Feb-09 43
VJ X7R Dielectric
Vishay Vitramon
FEATURES
•General purpose dielectric
•Excellent aging characteristics
•Ideal for decoupling and filtering
•Ideal for surge suppression and high voltage
applications
•Wide range of case sizes, voltage ratings and
capacitance values
•Surface mount, precious metal technology, wet built
process
•Halogen-free according to IEC 61249-2-21
ELECTRICAL SPECIFICATIONS
Note: Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
Capacitance Range: 100 pF to 1.8 µF
Voltage Rating: 10 Vdc to 1000 Vdc
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 Vdc applied
X5R: ± 15 % from - 55 °C to + 85 °C, with 0 Vdc applied (4)
Dissipation Factor (DF):
≤ 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz
Aging Rate: 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
1 to 5 second period and the charge/discharge current does
not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630/1000 Vdc: DWV at 150 % of rated voltage
Notes:
(1) DC voltage rating should not be exceeded in application
(2) Process Code may be added with up to three digits, used to control non-standard products and/or special requirements
(3) Case size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements
(4) Selected values for X5R, see selection chart
(5) “A2” temporarily used to identify manufacturing plant for size ≥ 1812
(6) Selected values available, contact mlcc@vishay.com for list of released ratings
ORDERING INFORMATION
VJ0805 (3) Y 102 K X A A T ### (2)(5)
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION DC VOLTAGE
RATING (1)
MARKING PACKAGING PROCESS CODE
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
Y = X7R
G = X5R (4)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
102 = 1000 pF
J = ± 5 %
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % tin plate
matte finish
F = AgPd
B = Polymer
100 % tin plate
matte finish (6)
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
E = 500 V
P = 250 V
L = 630 V
G = 1000 V
A = Unmarked
M = Marked
Note: Marking is
only available for
0805 and 1206
with termination
code “X”
T = 7" reel/plastic tape
C = 7" reel/paper tape
R = 11 1/4" reel/plastic tape
P = 11 1/4" reel/paper tape
O = 7" reel/flamed paper tape
I = 11 1/4"/13"reel/flamed paper
tape
Note: “I” and “O” is used for
“F” termination paper taped size
0402/0603/0805
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45127
44 Revision: 20-Feb-09
VJ X7R Dielectric
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Note:
• Polymer terminations, “B” termination part number code, length dimensions, positive tolerances (including band width) above are allowed to
increase by the following amounts:
0402/0603/3640 size, consult mlcc@vishay.com
0805/1210/1812/2220/2225 max. add length 0.0040"/0.10 mm
1206/1808 max. add length 0.0055"/0.14 mm
DIMENSIONS in inches [millimeters]
EIA STYLE
PART
ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
TERMINATION
(P)
MINIMUM MAXIMUM
0402 VJ0402 0.040 + 0.004/- 0.002
[1.00 + 0.10/- 0.05]
0.020 + 0.004/- 0.002
[0.50 + 0.10/- 0.05]
0.024
[0.60]
0.004
[0.10]
0.016
[0.41]
0603 VJ0603 0.063 ± 0.005
[1.60 ± 0.12]
0.031 ± 0.005
[0.80 ± 0.12]
0.036
[0.92]
0.012
[0.30]
0.018
[0.46]
0805 VJ0805 0.079 ± 0.008
[2.00 ± 0.20]
0.049 ± 0.008
[1.25 ± 0.20]
0.057
[1.45]
0.010
[0.25]
0.028
[0.71]
1206 VJ1206 0.126 ± 0.008
[3.20 ± 0.20]
0.063 ± 0.008
[1.60 ± 0.20]
0.067
[1.70]
0.010
[0.25]
0.028
[0.71]
1210 VJ1210 0.126 ± 0.008
[3.20 ± 0.20]
0.098 ± 0.008
[2.50 ± 0.20]
0.067
[1.70]
0.010
[0.25]
0.028
[0.71]
-VJ1808
0.177 ± 0.010
[4.50 ± 0.25]
0.080 ± 0.010
[2.03 ± 0.25]
0.067
[1.70]
0.010
[0.25]
0.030
[0.76]
1812 VJ1812 0.177 ± 0.010
[4.50 ± 0.25]
0.126 ± 0.008
[3.20 ± 0.20]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
1825 VJ1825 0.177 ± 0.010
[4.50 ± 0.25]
0.252 ± 0.010
[6.40 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
-VJ2220
0.220 ± 0.008
[5.59 ± 0.20]
0.200 ± 0.010
[5.08 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
-VJ2225
0.220 ± 0.010
[5.59 ± 0.25]
0.250 ± 0.010
[6.35 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
-VJ3640
0.360 ± 0.015
[9.14 ± 0.38]
0.400 ± 0.015
[10.20 ± 0.38]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
LW
T
MAX.
P
VJ X7R Dielectric
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Vishay Vitramon
Document Number: 45127 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 20-Feb-09 45
Notes:
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
(2) X5R (- 55 °C to + 85 °C TCC: ± 15 %) for all 0805/10 V ratings
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC X7R
STYLE VJ0402 VJ0603 VJ0805 (2) VJ1206 VJ1210 (1)
EIA TYPE 0402 0603 0805 1206 1210
VOLTAGE (Vdc)
16 25 50 100 16 25 50 100 200 10 16 25 50 100 200 16 25 50 100 200 250 500 630 16 25 50 100 200 500 630
CAP.
CODE CAP.
121 120 pF •• •• •• ••
151 150 pF •• •• •• ••
181 180 pF •• •• •• ••
221 220 pF •• •• •• ••
271 270 pF •• •• •• ••
331 330 pF •• •• •• •• •• •• •• •• •• ••
391 390 pF •• •• •• •• •• •• •• •• •• •• •• •• •
471 470 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
561 560 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
681 680 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
821 820 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
102 1000 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • •
122 1200 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • •
152 1500 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • •
182 1800 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • •
222 2200 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • •
272 2700 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • •
332 3300 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •
392 3900 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •
472 4700 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •
562 5600 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • •
682 6800 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • •
822 8200 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • •
103 0.010 µF •••••• •••••••• •••••••••••••••••••••••••••••••
123 0.012 µF •••• •••••••• •••••••••••••••••••• •••••••••
153 0.015 µF •••• •••••••• ••••••••••••••••••• •••••••••
183 0.018 µF •••• •••••••• •••••••••••••••••••••••••••••
223 0.022 µF •• •••••••• ••••••••••••••••••• ••••••••
273 0.027 µF •• •••••••• ••••••••••••••••••• •••••••
333 0.033 µF •• •••••••• ••••••• •••••••••• •••••••
393 0.039 µF •• •••••••• ••••••• ••••••••• •••••••
473 0.047 µF •• •••••• ••••••• ••••••••• ••••• •
563 0.056 µF •••••• ••••••• ••••••••• •••••
683 0.068 µF •••••• •••••• ••••••••• •••••
823 0.082 µF •••••• •••••• •••••••• •••••
104 0.10 µF •••••• ••••• ••••••••• •••••
124 0.12 µF •• ••••• ••••••• •••••
154 0.15 µF •• ••••• •••••• •••••
184 0.18 µF •• •••••• ••••
224 0.22 µF •• •••••• ••••
274 0.27 µF •• •••••• ••••
334 0.33 µF •• ••• ••••
394 0.39 µF • ••• ••••
474 0.47 µF • ••• ••••
564 0.56 µF • •• •••
684 0.68 µF • •• •••
824 0.82 µF • •• •••
105 1.0 µF • •• •••
125 1.2 µF
155 1.5 µF
185 1.8 µF
225 2.2 µF
275 2.7 µF
335 3.3 µF
395 3.9 µF
475 4.7 µF
565 5.6 µF
685 6.8 µF
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45127
46 Revision: 20-Feb-09
VJ X7R Dielectric
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Note:
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape
SELECTION CHART
DIELECTRIC X7R
STYLE VJ1808 (1) VJ1812 (1) VJ1825 (1) VJ2220 (1) VJ2225 (1) VJ3640 (1)
EIA TYPE - 1812 1825 - - -
VOLTAGE
(Vdc)
50 100 200 500 1000 25 50 100 200 500 1000 25 50 100 200 500 1000 50 100 200 500 25 50 100 200 500 1000 25 50 100 200 500
CAP.
CODE
CAP.
121 120 pF
151 150 pF
181 180 pF
221 220 pF
271 270 pF
331 330 pF
391 390 pF
471 470 pF •
561 560 pF •
681 680 pF •
821 820 pF •
102 1000 pF •• •
122 1200 pF •• •
152 1500 pF •• •
182 1800 pF •• •
222 2200 pF •• •
272 2700 pF •• •
332 3300 pF •• • •
392 3900 pF •• • •
472 4700 pF ••• • •
562 5600 pF ••• • •
682 6800 pF ••• • •
822 8200 pF ••• • •
103 0.010 µF •• •• • • • •
123 0.012 µF •• •• • • •
153 0.015 µF •• •• • • • • • •
183 0.018 µF •• •• • • • • • •
223 0.022 µF •••• ••••• • •••••• •
273 0.027 µF •••• ••••• • •••••• • •
333 0.033 µF ••• ••••• •••••• •••••• • ••
393 0.039 µF ••• ••••• •••••• •••••• • ••
473 0.047 µF ••• ••••• •••••• •••••• • ••
563 0.056 µF ••• ••••• •••••• •••••• • ••
683 0.068 µF ••• ••••• ••••• •••••• • ••
823 0.082 µF ••• ••••• ••••• •••••• • ••
104 0.10 µF ••• ••••• ••••• ••••••• • ••
124 0.12 µF •• •••• ••••• ••••••• ••
154 0.15 µF •• •••• ••••• ••••••• ••
184 0.18 µF •• •••• ••••• ••••••• •••••
224 0.22 µF • •••• •••• ••••••• •••••
274 0.27 µF • •••• •••• ••• ••••• •••••
334 0.33 µF •••• •••• ••• ••••• •••••
394 0.39 µF •••• •••• ••• •••• •••••
474 0.47 µF •••• •••• ••• •••• •••••
564 0.56 µF ••• •••• ••• •••• •••••
684 0.68 µF ••• •••• ••• •••• •••••
824 0.82 µF ••• ••• ••• •••• ••••
105 1.0 µF •• ••• ••• •••• ••••
125 1.2 µF ••• •• •••• ••••
155 1.5 µF ••• • ••• ••••
185 1.8 µF •• • ••• ••••
225 2.2 µF ••••••
275 2.7 µF ••••••
335 3.3 µF ••••
395 3.9 µF ••••
475 4.7 µF •••
565 5.6 µF •
685 6.8 µF •
VJ X7R Dielectric
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Vishay Vitramon
Document Number: 45127 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 20-Feb-09 47
X7R DIELECTRIC - TYPICAL PARAMETERS
15
10
5
0
- 5
- 10
- 15
- 20
TEMPERATURE °C
% CAPACITANCE CHANGE
X7R
- 25
- 30
TYPICAL PARAMETER X7R
TEMPERATURE COEFFICIENT OF CAPACITANCE
- 75 - 50 - 25 0 20 50 75 100 125 150 175
HOURS
1.0
0.0
- 1.0
- 2.0
% CAPACITANCE CHANGE
- 3.0
- 4.0
TYPICAL PARAMETER X7R
AGING RATE
1 10 100 1000 10 000
100
50
TEMPERATURE °C
% VOLTAGE
0
TYPICAL PARAMETER X7R
VOLTAGE VS. TEMPERATURE
150
200
- 75 - 50 - 25 0 20 50 75 100 125 150 175 180
0.0
DISSIPATION FACTOR VS. TEMPERATURE
TEMPERATURE °C
% DISSIPATION FACTOR
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
TYPICAL PARAMETER X7R
- 75 - 50 - 25 0 25 50 75 100 125 150 175
X7R
0.020
0.016
0.012
0.008
0.004
TYPICAL PARAMETER X7R
DISSIPATION FACTOR VS. VOLTAGE
50 V
100 V
DC VOLTS APPLIED
DISSIPATION FACTOR
0 10 20 30 40 50 60 70 80 90 100 UN/V-
TYPICAL PARAMETER X7R
DISSIPATION FACTOR VS. VOLTAGE
0100 200 300 400 500 600 700 UN/V-
0.020
0.016
0.012
0.008
0.000
500/630 V
200 V
DC VOLTS APPLIED
DISSIPATION FACTOR
0 10 20 30 40 50 60 70 80 90 100
0
- 15
- 20
- 25
- 30
- 10
5
5
25 V
RATED 50 V
100 V
TYPICAL PARAMETER X7R
VOLTAGE COEFFICIENT OF CAPACITANCE
DC VOLTS APPLIED
% CAPACITANCE CHANGE
RATED
RATED
10 25 100
10 000
1000
100
10
INSULATION RESISTANCE
(ΩF)
150
TYPICAL PARAMETER X7R
MIN. INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE °C
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
