VJ X7R Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications FEATURES * General purpose dielectric * Excellent aging characteristics * Ideal for decoupling and filtering * Ideal for surge suppression and high voltage applications * Wide range of case sizes, voltage ratings and capacitance values * Surface mount, precious metal technology, wet built process * Halogen-free according to IEC 61249-2-21 ELECTRICAL SPECIFICATIONS Note: Electrical characteristics at + 25 C unless otherwise specified Operating Temperature: - 55 C to + 150 C Capacitance Range: 100 pF to 1.8 F Insulation Resistance (IR): At + 25 C and rated voltage 100 000 M minimum or 1000 F, whichever is less At + 125 C and rated voltage 10 000 M minimum or 100 F, whichever is less Voltage Rating: 10 Vdc to 1000 Vdc Temperature Coefficient of Capacitance (TCC): X7R: 15 % from - 55 C to + 125 C, with 0 Vdc applied X5R: 15 % from - 55 C to + 85 C, with 0 Vdc applied (4) Dissipation Factor (DF): 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz > 25 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz Aging Rate: 1 % maximum per decade Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA 200 Vdc: DWV at 250 % of rated voltage 500 Vdc: DWV at 200 % of rated voltage 630/1000 Vdc: DWV at 150 % of rated voltage ORDERING INFORMATION VJ0805 (3) Y 102 K X CASE CODE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE NOMINAL CODE TOLERANCE RATING (1) 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 Y = X7R Expressed in G = X5R (4) picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 102 = 1000 pF J=5% K = 10 % M = 20 % X = Ni barrier 100 % tin plate matte finish F = AgPd B = Polymer 100 % tin plate matte finish (6) A T ### (2)(5) MARKING PACKAGING PROCESS CODE A Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V E = 500 V P = 250 V L = 630 V G = 1000 V A = Unmarked M = Marked Note: Marking is only available for 0805 and 1206 with termination code "X" T = 7" reel/plastic tape C = 7" reel/paper tape R = 11 1/4" reel/plastic tape P = 11 1/4" reel/paper tape O = 7" reel/flamed paper tape I = 11 1/4"/13"reel/flamed paper tape Note: "I" and "O" is used for "F" termination paper taped size 0402/0603/0805 Notes: (1) DC voltage rating should not be exceeded in application (2) Process Code may be added with up to three digits, used to control non-standard products and/or special requirements (3) Case size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements (4) Selected values for X5R, see selection chart (5) "A2" temporarily used to identify manufacturing plant for size 1812 (6) Selected values available, contact mlcc@vishay.com for list of released ratings Document Number: 45127 Revision: 20-Feb-09 For technical questions, contact: mlcc@vishay.com www.vishay.com 43 VJ X7R Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications DIMENSIONS in inches [millimeters] W L T MAX. P PART ORDERING NUMBER LENGTH (L) 0402 VJ0402 0.040 + 0.004/- 0.002 [1.00 + 0.10/- 0.05] 0.020 + 0.004/- 0.002 [0.50 + 0.10/- 0.05] 0603 VJ0603 0.063 0.005 [1.60 0.12] 0805 VJ0805 1206 EIA STYLE WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION (P) MINIMUM MAXIMUM 0.024 [0.60] 0.004 [0.10] 0.016 [0.41] 0.031 0.005 [0.80 0.12] 0.036 [0.92] 0.012 [0.30] 0.018 [0.46] 0.079 0.008 [2.00 0.20] 0.049 0.008 [1.25 0.20] 0.057 [1.45] 0.010 [0.25] 0.028 [0.71] VJ1206 0.126 0.008 [3.20 0.20] 0.063 0.008 [1.60 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] 1210 VJ1210 0.126 0.008 [3.20 0.20] 0.098 0.008 [2.50 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] - VJ1808 0.177 0.010 [4.50 0.25] 0.080 0.010 [2.03 0.25] 0.067 [1.70] 0.010 [0.25] 0.030 [0.76] 1812 VJ1812 0.177 0.010 [4.50 0.25] 0.126 0.008 [3.20 0.20] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] 1825 VJ1825 0.177 0.010 [4.50 0.25] 0.252 0.010 [6.40 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ2220 0.220 0.008 [5.59 0.20] 0.200 0.010 [5.08 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ2225 0.220 0.010 [5.59 0.25] 0.250 0.010 [6.35 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ3640 0.360 0.015 [9.14 0.38] 0.400 0.015 [10.20 0.38] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] Note: * Polymer terminations, "B" termination part number code, length dimensions, positive tolerances (including band width) above are allowed to increase by the following amounts: 0402/0603/3640 size, consult mlcc@vishay.com 0805/1210/1812/2220/2225 max. add length 0.0040"/0.10 mm 1206/1808 max. add length 0.0055"/0.14 mm www.vishay.com 44 For technical questions, contact: mlcc@vishay.com Document Number: 45127 Revision: 20-Feb-09 VJ X7R Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ0402 VJ0603 VJ0805 (2) VJ1206 EIA TYPE 0402 0603 0805 1206 VOLTAGE (Vdc) 16 25 50 100 16 25 50 100 200 10 16 25 50 100 200 16 25 50 100 200 CAP. CAP. CODE 121 120 pF ** ** ** ** 151 150 pF ** ** ** ** 181 180 pF ** ** ** ** 221 220 pF ** ** ** ** 271 270 pF ** ** ** ** 331 330 pF ** ** ** ** ** ** ** ** 391 390 pF ** ** ** ** ** ** ** ** ** ** 471 470 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 561 560 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 681 680 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 821 820 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 102 1000 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 122 1200 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 152 1500 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 182 1800 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 222 2200 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 272 2700 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 332 3300 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 392 3900 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 472 4700 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 562 5600 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 682 6800 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 822 8200 pF ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 103 0.010 F ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 123 0.012 F ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 153 0.015 F ** ** ** ** ** ** ** ** ** ** * ** ** ** ** ** 183 0.018 F ** ** ** ** ** ** ** ** ** ** * ** ** ** ** ** 223 0.022 F ** ** ** ** ** ** ** ** ** * ** ** ** ** ** 273 0.027 F ** ** ** ** ** ** ** ** ** * ** ** ** ** ** 333 0.033 F ** ** ** ** ** ** ** ** * ** ** ** ** ** 393 0.039 F ** ** ** ** ** ** ** ** * ** ** ** ** * 473 0.047 F ** ** ** ** ** ** ** * ** ** ** ** * 563 0.056 F ** ** ** ** ** ** * ** ** ** ** * 683 0.068 F ** ** ** ** ** * * ** ** ** ** * 823 0.082 F ** ** ** ** ** * * ** ** ** * * 104 0.10 F ** ** ** ** ** * ** ** ** * * 124 0.12 F ** ** ** * ** ** ** * 154 0.15 F ** ** ** * ** ** * * 184 0.18 F * * ** ** * * 224 0.22 F * * ** ** * * 274 0.27 F * * ** ** * * 334 0.33 F * * * * * 394 0.39 F * * * * 474 0.47 F * * * * 564 0.56 F * * * 684 0.68 F * * * 824 0.82 F * * * 105 1.0 F * * * 125 1.2 F 155 1.5 F 185 1.8 F 225 2.2 F 275 2.7 F 335 3.3 F 395 3.9 F 475 4.7 F 565 5.6 F 685 6.8 F Notes: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 (2) X5R (- 55 C to + 85 C TCC: 15 %) for all 0805/10 V ratings ** Paper tape * Plastic tape Document Number: 45127 Revision: 20-Feb-09 For technical questions, contact: mlcc@vishay.com VJ1210 (1) 1210 250 500 630 16 25 50 100 200 500 630 * * * ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** * * * ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * www.vishay.com 45 VJ X7R Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications SELECTION CHART DIELECTRIC X7R VJ1812 (1) VJ1825 (1) VJ2220 (1) STYLE VJ1808 (1) EIA TYPE 1812 1825 VOLTAGE 50 100 200 500 1000 25 50 100 200 500 1000 25 50 100 200 500 1000 50 100 200 500 (Vdc) CAP. CAP. CODE 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF * 561 560 pF * 681 680 pF * 821 820 pF * 102 1000 pF * * * 122 1200 pF * * * 152 1500 pF * * * 182 1800 pF * * * 222 2200 pF * * * 272 2700 pF * * * 332 3300 pF * * * * 392 3900 pF * * * * 472 4700 pF * * * * * 562 5600 pF * * * * * 682 6800 pF * * * * * 822 8200 pF * * * * * 103 0.010 F * * * * * * * * 123 0.012 F * * * * * * * 153 0.015 F * * * * * * * * * * 183 0.018 F * * * * * * * * * * 223 0.022 F * * * * * * * * * * * * * * * * * 273 0.027 F * * * * * * * * * * * * * * * * * 333 0.033 F * * * * * * * * * * * * * * * 393 0.039 F * * * * * * * * * * * * * * * 473 0.047 F * * * * * * * * * * * * * * * 563 0.056 F * * * * * * * * * * * * * * * 683 0.068 F * * * * * * * * * * * * * * 823 0.082 F * * * * * * * * * * * * * * 104 0.10 F * * * * * * * * * * * * * * * 124 0.12 F * * * * * * * * * * * * * 154 0.15 F * * * * * * * * * * * * * 184 0.18 F * * * * * * * * * * * * * 224 0.22 F * * * * * * * * * * * 274 0.27 F * * * * * * * * * * * * 334 0.33 F * * * * * * * * * * * 394 0.39 F * * * * * * * * * * * 474 0.47 F * * * * * * * * * * * 564 0.56 F * * * * * * * * * * 684 0.68 F * * * * * * * * * * 824 0.82 F * * * * * * * * * 105 1.0 F * * * * * * * * 125 1.2 F * * * * * 155 1.5 F * * * * 185 1.8 F * * * 225 2.2 F * 275 2.7 F * 335 3.3 F 395 3.9 F 475 4.7 F 565 5.6 F 685 6.8 F Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 * Plastic tape www.vishay.com 46 For technical questions, contact: mlcc@vishay.com VJ2225 (1) - VJ3640 (1) - 25 50 100 200 500 1000 25 50 100 200 500 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Document Number: 45127 Revision: 20-Feb-09 VJ X7R Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS 15 % CAPACITANCE CHANGE % CAPACITANCE CHANGE TYPICAL PARAMETER X7R TEMPERATURE COEFFICIENT OF CAPACITANCE 10 5 0 -5 X7R - 10 - 15 - 20 - 25 - 30 0.0 - 1.0 - 2.0 - 3.0 - 4.0 1 - 75 - 50 - 25 0 20 50 75 100 125 150 175 TEMPERATURE C TYPICAL PARAMETER X7R VOLTAGE VS. TEMPERATURE 150 100 50 0 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1000 10 000 - 75 - 50 - 25 0 25 50 75 100 125 150 175 TEMPERATURE C TYPICAL PARAMETER X7R DISSIPATION FACTOR VS. VOLTAGE TYPICAL PARAMETER X7R DISSIPATION FACTOR VS. VOLTAGE 0.020 DISSIPATION FACTOR 0.020 0.016 0.012 50 V 0.008 100 V 0.004 0.016 0.012 0.008 200 V 500/630 V 0.000 0 10 20 30 40 50 60 70 80 90 100 UN/V- 0 100 DC VOLTS APPLIED 5 200 300 400 500 DC VOLTS APPLIED 600 700 UN/V- TYPICAL PARAMETER X7R MIN. INSULATION RESISTANCE VS. TEMPERATURE INSULATION RESISTANCE (F) TYPICAL PARAMETER X7R VOLTAGE COEFFICIENT OF CAPACITANCE % CAPACITANCE CHANGE 100 HOURS X7R - 75 - 50 - 25 0 20 50 75 100 125 150 175 180 TEMPERATURE C DISSIPATION FACTOR 10 TYPICAL PARAMETER X7R DISSIPATION FACTOR VS. TEMPERATURE % DISSIPATION FACTOR % VOLTAGE 200 TYPICAL PARAMETER X7R AGING RATE 1.0 10 000 0 5 1000 - 10 25 V RATED - 15 - 20 100 V RATED 50 V RATED - 25 - 30 0 10 20 Document Number: 45127 Revision: 20-Feb-09 30 40 50 60 70 80 DC VOLTS APPLIED 90 100 100 10 10 For technical questions, contact: mlcc@vishay.com 25 100 TEMPERATURE C 150 www.vishay.com 47 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1