307
www.littelfuse.com
6
SILICON DIODE
ARRAYS
Silicon Avalanche Diodes
1500 Watt Axial Leaded Transient Voltage Suppressors
The ICTE/MPTE series 1500 W transient suppressors are designed
specifically for protection of CMOS, NMOS, BiMOS, and other
integrated circuits available today for TTL, DTL, ECL, RTL, and
linear functions. This series offers the lowest clamping voltages.
FEATURES
Stand-off voltage range 5 to 45 Volts
Uni-directional and Bi-directional
Glass passivated junction
Very low clamping voltages
100% surge tested
MAXIMUM RATING
Peak Pulse Power (Ppk): 1500 Watts (10 x 1000µs) @25°C
(see diagram on page 3 for wave form)
5 watt steady state
Response time: 1 x 10-12 seconds (theoretical)
Forward surge rating 200 Amps, 8.3ms half sine wave, (uni-
directional devices only)
Operating & storage temperature: -55°C to +150°C
MECHANICAL CHARACTERISTICS
Case: DO-201AD: Molded plastic over glass
passivated junction
Terminals: Axial leads, solderable per MIL-STD-202
Method 208
Solderable leads = 230°C for 10 seconds (1.59mm from case)
Marking: cathode band, (positive terminal, uni-directional
devices only), device code, logo
Weight: 1.5 grammes (approx)
Agency Approvals: Recognized under the Components
Program of Underwriters Laboratories.
Agency File Number: E128662
Max 1.066
Min 25.4
4.826
5.207
Min 25.4
9.146
9.527
ORDERING INFORMATION
ICTE or MPTE C
Voltage
Bi-Directional
Packaging Option
B = Bulk (500 pcs)
T = Tape and reeled (1500 pcs)
All dimensions in mm
ICTE/MPTE Series
®
ICTE-5/MPTE-5*
ICTE-8/MPTE-8*
ICTE-10/MPTE-10
ICTE-12/MPTE-12
ICTE-15/MPTE-15
ICTE-18/MPTE-18*
ICTE-22/MPTE-22
ICTE-36/MPTE-36
ICTE-45/MPTE-45
Part
Number
Reverse
Standoff
Voltage
Vr
(Volts)
5.0
8.0
10.0
12.0
15.0
18.0
22.0
36.0
45.0
Minimum
Breakdown
Voltage
Vbr @1mA
(Volts)
6.0
9.4
11.7
14.1
17.6
21.2
25.9
42.4
52.9
Maximum
Reverse
Leakage
Ir @ Vr
(µA)
300.0
25.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
Maximum
Clamping
Voltage
VC@ IPP 1=1A
(Volts)
7.1
11.3
13.7
16.1
20.1
24.2
29.8
50.6
63.3
Maximum
Peak Pulse
Current
IPP
(A)
160.0
100.0
90.0
70.0
60.0
50.0
40.0
23.0
19.0
Maximum
Clamping
Voltage
VC@ IPP 2=10A
(Volts)
7.5
11.5
14.1
16.5
20.6
25.2
32.0
54.3
70.0
ICTE-8C/MPTE-8C
ICTE-10C/MPTE-10C
ICTE-12C/MPTE-12C
ICTE-15C/MPTE-15C
ICTE-18C/MPTE-18C
ICTE-22C/MPTE-22C
ICTE-36C/MPTE-36C
ICTE-45C/MPTE-45C
8.0
10.0
12.0
15.0
18.0
22.0
36.0
45.0
9.4
11.7
14.1
17.6
21.2
25.9
42.4
52.9
50.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
11.4
14.1
16.7
20.8
24.8
30.8
50.6
63.3
100.0
90.0
70.0
60.0
50.0
40.0
23.0
19.0
11.6
14.5
17.1
21.4
25.5
32.0
54.3
70.0
ICTE-5 is not available in Bi-directional. Suffix C denotes Bi-directional device. * Preferred voltages.
VFmax = 3.5 Volts max at IF= 50A 300µS square wave pulse
308 www.littelfuse.com
ELECTRICAL SPECIFICATION @ Tamb 25°C
Silicon Avalanche Diodes
Pulse Width (tp)
1µs 1.0µs10µs 100µs 1.0ms 10ms
0.1
1.0
10
100
Pp
(kw)
Figure 2 - Peak Pulse Power Rating Curve
100,000
10,000
1000
1001 2 5 10 20 50 100 200
Pulse width (tp)
Cj (pf)
TJ=2 5°C
f=1.0 MHz
Vsig=50mVp-p
Measured at
Stand-Off
Voltage (VR)
Measured at
Zero Bias
V(BR) - Breakdown Voltage - Volts
ICTE/MPTE Series
1500 Watt Axial Leaded Transient Voltage Suppressors
®
Figure 1 - Typical Junction Capacitance