UNE SOCIETE DE SOVCOR METAL FILM GEKA professional NT..S/NP..S/NY../NK.. ile Features ie - @ = stable film structure _ @ good stability jie superior moisture resistance ~ i. Oe @ foruse in professional electronics Style -SOVCOR Style P Limit. Voltage Tc") Tolerance Resistance Range E-Series at 70C Voz ppm/C % Q NT3S 0,125 200 15 0,1... 1 1K - 200K 192 0,1 0,25 1K 200K 192 192 NP3S 0,25 200 25 0,5 1 100 200K 192 96 0,5 10-1M 192 NY3 0,25 200 50 1 10-1,5M 96 1 101,5M 96 NK3 0,25 200 100 2 5 4,7-1,5M 24 NT4S 0,25 350 15 0,1...1 100 - 499K 96 192 NP4S 0,5 350 25 0.1... 100~1M 96 - 192 0,5 10-1M 192 NY4 0,5 350 50 1 10-3,01M 96 NK4 0,5 350 100 2 5 1-3M 24 N4 0,5 350 200 2 5 1-3M 24 NT5S 0,5 350 15 0,1...1 100 499K 96 - 192 NP5S 0,5 350 25 0,1... 1 1001M 96-192 0,5 10-1M 192 NY5 0,5 350 50 1 10-3,92M 96 NK5 0,5 350 100 2 5 5,13,9M 24 N5 0,5 350 200 2 5 5,1-3,9M 24 1) for TC <15 ppm/C: temperature range -25C ... +85C 88 * coating: dark green marking: see page 128UNE SOCIETE DE METAL FILM SOVCOR GEKA NT..S/NP..S/NY../NK.. professional Style Dimensions (mm) 6mm : : a : D Dmax Linax A d e : N..3.. 1,8 3,9 53 0,5 5,08 (e) N..4.. 2,5 6,2 53 0,6 7,62 N..5.. 3,3 8,7 53 0,6 12,70 * The NK3 resistor can be cropped and + taping corresponds to IEC286 and EIA296D, see page 102 bent to 5.08 mm pitch. + DandL measured in accordance with IEC294 daccording to |EC301 Technical Characteristics Parameter Unit NT3S N..3 NT4S NT..4 NT..5 Power Rating at 70C WwW 0,125 0,25 0,25 0,5 0,5 Limiting Element Voltage V= 200 200 350 350 350 Isolation Voltage V- >500 >500 >700 >700 >700 Thermal Resistance (maximum) K/W 170 170 145 145 110 Terminal Strength, axial N >40 >40 >50 >50 >50 Weight g 0,15 0,15 0,30 0,30 0,50 Failure Rate 10-9/h <10 Insulation Resistance Q 210"! Category Temperature Range C 55/+155!) VYior TC <15 ppm/C: temperature range 25C ... +85C Ordering Information NK3 1,8K +2 A5 Style Resistance Value Tolerance Packaging Q % Packaging Style Tolerance TG pieces/ min. quantity pieces/ min. quantity % pom/C reel per order box per order NT3S/NP3S 0,1...1 15- 25 5000 1 100 1 NY3 0,5 50 5000 1 500 1 NY3 1 50 5000 1 1000 1 NK3 1.2.5 100 5000 1 1000 1 NY3CC/NK3CC 1.5 50-100 - - 500 1 NT4S/NP4S 0,1...1 15- 25 5000 1 100 1 NY4 0,5...1 50 5000 1 500 1 NK4/N4 2..5 100 - 200 5000 1 1000 1 NT5S/NP5S 0,1...1 15- 25 2500 1 100 1 NY5/NK5/N5 0,5..5 50- 20 2500 1 500 1 * further information about packaging: see page 102 89UNE SOCIETE DE METAL FILM SCEKR professional NT..S/NP..S/NY../NK.. 4110 rn rn - 10K 100 N 80 N 1K | CECC 40101-001/019 8 x NK3/ NK5 (245%) 8 60 | NX 2 5 / \ E g & c 3 40 i 1 2 PN foal AN 20 {| 4 | Koo \ 0 enim aN 1 0 20 40 60 80 100 120 140 160 180 200 0 10 100 1000 Derating Ambient Temperature in C HF-Characteristics NK4/TR4 Frequency in MHz 110 100 \ 4 80 + N \ CECC 40 101-003 Ps | N4/ N5 (245%) 60 | L N a = a 3 40 a x 20 } Nl 0 \ 0 20 40 60 80 100 120 140 160 180 200 Derating Ambient Temperature in C 110 aa | | 00 130 al > = @ 120 g ' 2 110 8 z= 100 8 2 90 5 oo. z 80 8 oo = 70 60 0,01 10 100 1K 10K 1M 10M 40 100 1K 10K 100K 1M 10M Non-Linearity A3 Resistance Value in Q Current Noise A; Resistance Value in Q Performance Test Conditions of test *) test results Endurance at 70C IEC 115-1 4.25.1 ; : Ota rated power (P 1000 h at 70C wee power (P70) 3 | < 40.1%... 40.4% 10, Endurance at IEC 115-1 4.25.3 1 < 20.2% upper category temperature 1000 h at 155C 2 $ 20,15% PP gory temp 3 < +0,2% IEC 115-1 4.13 1 < +0,03% Overload-Test 2,5 x rated power or twice the limiting element voltage 2 < +0,01% 2s for N..3.. and 5s styles >N..3.. 3 < +0,03% IEC 115-1 4.16 IEC 68-2-14 1 Thermal Shock Rapid change between upper and 2 < +0,04% lower category temperature 3 IEC 115-1 4.23 1 Climatic sequence dry heat, damp heat cyclic, 2 < +0,1% cold, low air pressure 3 IEC 115-1 4.24 IEC 68-2-3 1 Damp heat steady state 56 days at 40C and 93% relative humidity 2 < +0,2% and U = 0,1 x rated power 3 IEC 115-1 IEC 68-2-20 1 Resistance to soldering heat 10s at 260C 2 < +0,04% solder bath temperature 3 1 115-1 4.1 IEC 68-2-21 Robustness of terminations IEC : 8 . 6 . c 2 < 0,01% tensile, bending and torsion 3 *)14 NK3, NK4, NKS5 tolerance 2% ... 5% 24 NY3, NY4, NY5 tolerance 0,5... 1% 34 N4, N65 tolerance 2% ... 5%. Applicable Specifications * CECC 40101-001/002/003/019 + MIL/UTE/DIN/BS CECC *ESA-SCC 4001 001/002/005/007/009 91