TS53YL503MR10 - Vishay / Sfernice

TS53

www.vishay.com Vishay Sfernice

Revision: 22-Sep-15 1Document Number: 51008

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

5 mm Square Surface Mount Miniature Trimmers Single-Turn

Cermet Sealed

The TS53 trimming potentiometer has been designed for

surface mount applications and offers volumetric efficiency

(5 mm x 5 mm x 2.7 mm) with high performance and

stability.

The TS53 design is suitable for both manual or automatic

operation, and can withstand wave, and reflow soldering

techniques.

FEATURES

• 0.25 W at 70 °C

• For through hole version see T53Y series

• Wide ohmic range (10  to 1 M)

• Small size for optimum packaging density

• Tests according to CECC 41000 or IEC 60393-1

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

DIMENSIONS in millimeters (± 0.25 mm)

RECOMMENDED

SOLDERING AREAS

TS53YL TS53YJ TS53YL TS53YJ

Cruciform screwdriver slot

Ø 2.5, width 0.5

Deep: 0.55

Max. deep (center): 0.7

2.7

6.70

0.20

0.75

2.7

5.5

0.20

1.1 1.3

5.5

1.3

2.3

1.3

2.3

103

1 x 0.20

0.9 x 0.20

2.30

1 x 0.20 0.9 x 0.20

2.30

TS53

www.vishay.com Vishay Sfernice

Revision: 22-Sep-15 2Document Number: 51008

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ELECTRICAL SPECIFICATIONS

Resistive element Cermet

Electrical travel 220° ± 15°

Resistance range 10  to 1 M

Standard series 1 - 2 - 5

Tolerance standard ± 20 %

Circuit diagram

Power rating

linear 0.25 W at + 70 °C

Temperature coefficient See Standard Resistance Element Data table

Limiting element voltage (linear law) 200 V

Contact resistance variation (typical) 1 % or 3 

End resistance (typical) 0.1 % or 3 

Dielectric strength (RMS) 1000 V

Insulation resistance 1 G

MECHANICAL SPECIFICATIONS

Mechanical travel 270 ° ± 10°

Operating torque (max. Ncm) 1.5

End stop torque (max. Ncm) 3.5

Unit weight (max. g) 0.15

Terminals Pure Sn (e3)

ENVIRONMENTAL SPECIFICATIONS

Temperature range -55 °C to +125 °C

Climatic category 55/125/56

Sealing Sealed container IP67

MSL level 4

SOLDERING RECOMMENDATIONS

Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029

Caution

Reflow soldering must be done within 72 h while stored under a max. temperature of 30 °C, 60 % RH after opening the dry pack envelope.

(1)

(2)

(3)

020 40 60 100 120 140 155

0.05

0.10

0.15

0.20

0.25

AMBIENT TEMPERATURE IN °C

POWER IN W

TS53

www.vishay.com Vishay Sfernice

Revision: 22-Sep-15 3Document Number: 51008

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Nothing stated herein shall be construed as a guarantee of quality or durability.

RECOMMENDED METHOD OF STORAGE

Dry box storage is recommended as soon as the hermetic bag has been opened to prevent moisture absorption. The following conditions

should be observed, if dry boxes are not available:

• Storage temperature 10 °C to 30 °C

• Storage humidity  60 % RH max.

After more than 72 h under these conditions, moisture content will be too high for reflow soldering.

In case of moisture absorption, the devices will recover to the former condition by drying under the following condition:

192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or

96 h at 60 °C + 5 °C and < 5 % RH for all device containers (not suitable for reel) or

24 h at 125 °C + 5 °C (not suitable for reel)

PERFORMANCES

TESTS CONDITIONS TYPICAL VALUES AND DRIFTS

RT/RT (%) R1-2/R1-2 (%) OTHER

Electrical endurance 1000 h at rated power

90'/30' - ambient temp. 70 °C ± 2 % ± 3 % Contact resistance variation:

R < 1 % Rn

Climatic sequence

Phase A dry heat 125 °C

Phase B damp heat

Phase C cold -55 °C

Phase D damp heat 5 cycles

± 2 % ± 3 %

Damp heat steady state Temperature 40 °C - RH 93 %

56 days ± 2 % ± 3 % Dielectric strength: 1000 VRMS

Insulation resistance: > 104 M

Charge of temperature -55 °C to +125 °C - 5 cycles ± 1 % V1-2/V1-3  ± 2 %

Mechanical endurance 100 cycles - rated power ± (3 % + 5 )

Shock 50 g - 11 ms

3 successive shocks in 3 directions ± 1 % V1-2/V1-3  ± 1 %

Vibration 10 Hz to 55 Hz

0.75 mm or 10 g - 6 h ± 1 % V1-2/V1-3  ± 1 %

STANDARD RESISTANCE ELEMENT DATA

STANDARD

RESISTANCE

VALUES

LINEAR LAW TYPICAL

TCR

- 55 °C

+ 125 °C

MAX. POWER

AT 70 °C

MAX. WORKING

VOLTAGE

MAX. CURRENT

THROUGH ELEMENT

W V mA ppm/°C

10 0.25 1.58 158

± 100

20 0.25 2.24 112

50 0.25 3.54 71

100 0.25 5.00 50

200 0.25 7.07 35

500 0.25 11.2 22

1K 0.25 15.8 16

2K 0.25 22.4 11

5K 0.25 35.4 7

10K 0.25 50.0 5

20K 0.25 70.7 3.5

50K 0.25 112 2.2

100K 0.25 158 1.6

200K 0.20 200 1.0

500K 0.08 200 0.4

1M 0.04 200 0.2

TS53

www.vishay.com Vishay Sfernice

Revision: 22-Sep-15 4Document Number: 51008

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MARKING

Vishay trademark, ohmic value, manufacturing date

The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier.

Example: 100 = 10 

101 = 100 

102 = 1000 

503 = 50 000 

PACKAGING

On tape and reel of 500 pieces, code R10 (TR500) and 2000 pieces, code R20 (TR2000)

Cover tape panel strength specifications EIA 481 A and CEI 60286-3.

DRYPACK

Devices are packed in moisture barrier bags to prevent the products from moisture absorption during transportation and storage. 

Each bag contains a desiccant.

ORDERING INFORMATION (part number)

MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL

NUMBER

TS53 YL

From

10  to 1 M

504 = 500 k

M = 20 % R10 =

reel 500 pieces

On request

R20 =

reel 2000 pieces

(If applicable)

Given by

Vishay

for custom

design

DESCRIPTION (for information only)

TS53 YL 500K 20 % TR e3

MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD (Pb)-FREE

RELATED DOCUMENTS

APPLICATION NOTES

Potentiometers and Trimmers www.vishay.com/doc?51001

Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029

3 slots - width 2° to 120° - Ø ext. 23

Ø 12.7

Ø 178 ± 2

0.3

3.2

Ø 70

85.2

7.6

5.5

1.75 4

Ø 1.5

1050 M4RS5 Y3LT

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

TS53YJ200-20%-TR TS53YL 20 20%TR TS53YJ 100 20%TR TS53YJ 10K 20%TR TS53YJ 1K 20%RB2 TS53YJ

1K 20%TR TS53YJ 20K 20%TR TS53YL 100K 20%TR TS53YL 10K 20%TR TS53YL 1K 20%TR TS53YL 200K

20%TR TS53YL 2K 20%TR TS53YL 50K 20%TR TS5YJ 100K 10%TR TS53YJ 1M 20%TR TS53YJ502MR10

TS53YL502MR10 TS53YJ203MR10 TS53YL102MR10 TS53YJ101MR10 TS53YJ102MR10 TS53YJ103MR10

TS53YJ104MR10 TS53YJ105MR10 TS53YJ201MR10 TS53YJ202MR10 TS53YJ204MR10 TS53YJ500MR10

TS53YJ501MR10 TS53YJ503MR10 TS53YJ504MR10 TS53YL101MR10 TS53YL103MR10 TS53YL104MR10

TS53YL105MR10 TS53YL200MR10 TS53YL201MR10 TS53YL202MR10 TS53YL203MR10 TS53YL204MR10

TS53YL500MR10 TS53YL501MR10 TS53YL503MR10 TS53YL504MR10 TS53YL100MR10 TS53YJ205MR10