SPEC NO: $Z-9100 PART NO: DPA090010-S/T-SZ All information contained herein applies only to the PAGE NO: 1 of 5 UNIT;:mm | DATE: 03/19/00 above listed part number. Other versions of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Blvd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 * Fax: 503-643-6129 * www.cui.com 1. CONSTRUCTION: 1.1 Surface:Damage, rust, foam not. permitted. 1.2 Lead pull test: Xg_ for. Seconds. 1.3 Impregnation: Varnish. 1.4 Lead wire description: Terminal No. od | 2 | 3 | 4 | 5 | | 7 | 3 | 9 10 Color , Length (mm) Strip/Tin (mm) FIZIZIZIZIZ1 IZ IZ Class 2, ELECTRICAL CHARACTERISTICS: 2.1 Exciting Current: Input primary 120 vy. 60 He 40. MA MAX. 2.2 Primary rated voltage & frequency: 120 v 60 Hz. 2.3 Secnodary output voltage: Rated Voltage No Load Leads No.or Color Rated Voltage Current Regulation Voltage Boerne 4 AC 9Vi5% AC 100mA AC. LOVES S 2.4 HI-POT test: Input 60HZ 1500 V for one minute between Primary and Secondary and betWen Primary to Core. 1909 _V for one minute between Secondary and Secondary and _ between Secondary to Core. minutes following insulation must be larger than 5 Megohm. 2.5 Induced Voltage: At Secondary open. input Primary 400HZ 240 _V for 15 seconds. 2.6 Insulation test: 500Vde 100 M Ohm Min. between Windinhs and Windings and Core. 2.7 Humidity test: Temp. 3242C relative humidity 907RH for 6 hours, after keeping 30 2.8 Temperature rise test: Less than 70 C for rated test with Resistance method. 3. Adequate Standard: 4. Circuit Diagram: 5. Dimension (mm). 1 3 100mA t Lt ce ke ~a eo aSPEC NO: SZ-9100 PAGE NO: 2 of 5 PART NO: DPA090010-S/T-SZ UNIT: mm | DATE: 03/19/00 All information contained herein applies only to the bove listed part number. Other versions of this part number with electrical or mechanical variations are available. Contact CUI Inc. for further assistance. 9615 SW Allen Bivd., Ste. 103, Beaverton OR 97005 800-275-4899 * 503-643-4899 * Fax: 503-643-6129 www.cui.com PRIMARY SECONDARY ##1 SECONDARY 2 SECONDARY #63 Prigf Priff2 - DCL. NO. D.C.R.. ohms D.C.R.. _ ohms Input Exciting Rated No Load Vol tage & Current Current VAC DC Frequency MAX MAX 1200 /60Hz 17 17SPEC NO: $Z-9100 PART NO: DPA090010-S/T-SZ All information contained herein applies only p . ns of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Blvd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 * Fax: 503-643-6129 www.cui.com PAGE NO: 3 of 5 UNIT;:mm | DATE: 03/19/00 | 42.541 3741 . O \_A 6.3520.25 Lo ed 5 ~ oS Q Nm oe + a 3 1520.13 # % 12.740.5 CAUTION RISK OF ELECTRIC SHOCK. DRY LOCATION USE ONLY ATTENTION POUR UTILISATIGN A LCUNTERTEUR SEULEMENTSPEC NO: SZ-9100 PAGE NO: 4 of 5 PART NO: DPA090010-S/T-SZ UNIT: mm | DATE: 03/19/00 All information contained herein applies only to the bove listed part number. Other versions of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Blvd., Ste. 103, Beaverton OR 97005 800-275-4899 * 503-643-4899 * Fax: 503-643-6129 www.cui.com Q cuistack CLASS 2 TRANSFORMER DPA090010-S/T-SZ INPUT: 120V AC 50Hz 3W OUTPUT: 9V AC 100mA e/ \Wistep C 140a98 MODEL: 35A- 9-100 EIA363 O00XX S MADE IN CHINA 33.740 /-0.2 |--23.7+0 /-0.2 REMARKS: O0XX 5S 00 provides production year xx provides production. week s Fu Yong Adhesion strength of specification label (Tape peeling test) Firmly apply pressure sensitive adhesive tape on the middle of the specification label to the lengthwise direction Pull the tape off quickly at a 90 angle to the surface of the label once. [Specification] There shall be no blistering or peeling u rape of the specification label. [Used adhesive tape] 3m #44 Tape 18 width Thickness: 0.2mm Material: @ PVC ALUMINIUM @) BLACK WORD ON SILVER BASE SILVER WORD ON BLACK BASE O WHITE WORD ON BLACK BASEill PAGE NO: 5 of 5 UNIT;mm | DATE: 03/19/00 SPEC NO: $Z-9100 PART NO: DPA090010-S/T-SZ All information contained herein applies only p , ns of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Blvd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 * Fax: 503-643-6129 www.cui.com f ey