
Part Number: ATN-A12-06
Part Number: ATN-A12-06
223.0125
Corning Cable Systems offers In -Line, Flat Wavelength
Optical Attenuators that are easily inserted between the
connector and adapter in an “in -line” configuration and
are compatible with SC, ST® Compatible, FC, MU, LC
and angled SC and FC connectors.A fundamental ele-
ment of these Corning Cable Systems attenuators is the
zirconia ferrule containing a specially selected attenuat-
ing fiber. This special fiber minimizes the effect of modal
interference and gives the component a flat spectral re-
sponse. It is extremely stable over the wavelength range
of 1260 to 1360 nm and 1430 to 1580 nm.These in -line,
flat wavelength attenuators are available in Ultra PC (≤� -
55 dB) and Angled PC (≤� -65 dB) finish to meet the most
demanding network reflectance requirements.
Corning
Cable
Features and Benefits
Fully compatible with LC fiber optic connectors
No intermateability concerns
Numerical identification mark on housing
Easy indication of attenuation levels
Attenuator incorporated inside standard LC adapter
housings
Compatible with standard distribution panels
1 1
Standards
Design and Test Criteria Telcordia GR-910 issue 2
performance requirements
9.41 115 0
In-Line Optical Attenuators, Flat Wavelength,
LC APC
LC APC, 6 dB
Product Specification ATN-A12-06_NAFTA_AEN
Page 1 | Revision date 2013-10-16