1N4001 thru 1N4007
Vishay General Semiconductor
Document Number: 88503
Revision: 26-Mar-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
General Purpose Plastic Rectifier
FEATURES
Low forward voltage drop
Low leakage current
High forward surge capability
Solder dip 260 °C, 40 s
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of power
supplies, inverters, converters and freewheeling
diodes application.
(Note: These devices are not Q101 qualified.)
MECHANICAL DATA
Case: DO-204AL, molded epoxy body
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: Color band denotes cathode end
PRIMARY CHARACTERISTICS
IF(AV) 1.0 A
VRRM 50 V to 1000 V
IFSM (8.3 ms sine-wave) 30 A
IFSM (square wave tp = 1 ms) 45 A
VF1.1 V
IR 5.0 µA
TJ max. 150 °C
DO-204AL (DO-41)
Note:
(1) For device using on bridge rectifier application
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 75 °C IF(AV) 1.0 A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load IFSM 30 A
Non-repetitive peak forward tp = 1 ms
surge current square waveform tp = 2 ms
TA = 25 °C (Fig. 3) tp = 5 ms
IFSM
45
35
30
A
Maximum full load reverse current, full cycle
average 0.375" (9.5 mm) lead length TL = 75 °C IR(AV) 30 µA
Rating for fusing (t < 8.3 ms) (1) I2t3.7A
2s
Operating junction and storage temperature TJ, TSTG - 50 to + 150 °C
1N4001 thru 1N4007
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88503
Revision: 26-Mar-08
2
Note:
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT
Maximum instantaneous
forward voltage 1.0 A VF 1.1 V
Maximum DC reverse current
at rated DC blocking voltage
TA = 25 °C
TA = 125 °C IR 5.0
50 µA
Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT
Typical thermal resistance (1) RθJA
RθJL
50
25 °C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
1N4004-E3/54 0.33 54 5500 13" diameter paper tape and reel
1N4004-E3/73 0.33 73 3000 Ammo pack packaging
Figure 1. Forward Current Derating Curve
0
0 25 50 75 100 125 150 175
0.2
0.4
0.6
0.8
1.0
60 Hz Resistive or
Inductive Load
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pads
0.375" (9.5 mm)
Lead Length
Junction Temperature (°C)
Average Forward Rectified Current (A)
Figure 2. Maximum Non-repetitive Peak Forward Surge Current
5
10
15
20
25
30
TA = 75 °C
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
1 10 100
1N4001 thru 1N4007
Vishay General Semiconductor
Document Number: 88503
Revision: 26-Mar-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Instantaneous Forward Characteristics
Figure 5. Typical Reverse Characteristics
50 75 100
50
tp = 2 ms
25 125
30
25
20
15
45
40
35
10
Peak Forward Surge Current (A)
Ambient Temperature (°C)
tp = 1 ms
square waveform
tp
tp = 5 ms
0.6 0.81.0 1.2 1.4 1.6 1.8
0.01
0.1
1
10
100
T
J
= 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
0
0.01
0.1
1
10
100
60 80 10020 40
1000
T
J
= 150 °C
T
J
= 100 °C
T
J
= 25 °C
Percentage of Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
Figure 6. Typical Junction Capacitance
Figure 7. Typical Transient Thermal Impedance
1
10
100
Reverse Voltage (V)
0.1 1 10 100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Junction Capacitance (pF)
0.1
10
100
1
0.01 0.1 1 10 100
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
1N4001 thru 1N4007
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88503
Revision: 26-Mar-08
4
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.107 (2.7)
0.080 (2.0)
DIA.
0.034 (0.86)
0.028 (0.71)
DIA.
Note: Lead diameter is for suffix “E” part numbers
0.026 (0.66)
0.023 (0.58)
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.