RF01006, Rev. B (5/8/13) ©2013 Microsemi Corporation Page 1 of 6
MP4KE6.8A – MP4KE400CA(e3)
Available 400 Watt
Transient Voltage Suppressors
Screening in
reference to
MIL-PRF-19500
available
DESCRIPTION
This family of high-reliability, plastic packaged Transient Voltage Suppressors offer high
reliability at an affordable price. Standoff voltage values range from 5.8 to 342 volts and 5% or
10% tolerance options are available. Source control is standard and three increasingly
stringent screening options for enhanced reliability are available.
DO-41 (DO-204AL)
Package
Also available in:
J-bend Package
(surface mount)
MSMBJ5.0A – MSMBJ170A
Gull-wing Package
(surface mount)
MSMBG5.0A – MSMBG170A
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability.
All devices 100% surge tested.
Optional screening in reference to MIL-PRF-19500 is also availa ble. Refer t o High Reliability Non-
Hermetic Product portfolio for more deta ils on Microsemi screening options.
Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
3σ lot norm screening performed on standby current (ID).
RoHS compliant versions available.
APPLICATIONS / BENEFITS
Suppresses transients up to 400 watts @ 10/1000 µs (see Figure 1).
Protects sensitive components such as IC’s, CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.
Protection from switching transients & induced RF.
Compliant to IEC 6100 0-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively.
Secondary lightning protection per IEC 61000-4-5 with 42 ohms sour ce impedance:
Class 1: MP4KE5.0A to MP4KE91CA
Class 2: MP4KE5.0A to MP4KE47ACA
Class 3: MP4KE5.0A to MP4KE24CA
Class 4: MP4KE5.0A to MP4KE12CA
Secondary lightning protection per IEC 61000-4-5 with 12 oh ms sour ce imp edan ce:
Class 1: MP4KE5.0A to MP4KE30CA
Class 2: MP4KE5.0A to MP4KE15CA
MAXIMUM RATINGS
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-65 to +150
oC
Thermal Resi stan ce, Jun cti on to Leads
@ 3/8 inch (10 mm) from body
(1)
RӨJL 50
o
C/W
Peak Pulse Power Dissipation @ 10/1000
µ
s (2)
P
PP
400
W
Off-State Power Dissipation
@ T
L
= +25 oC (3)
@ TA = +25
o
C
(4)
P
D
2.5
1.13
W
Forward Voltage @ 25
o
C with 8.3 ms half-sine wave
(unidirectional only)
VF 3.5 V
Solder Temperature @ 10 s
TSP
260
oC
Notes: 1. Or 110 °C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and
track width 1 mm, length 25 mm.
2. With impulse repetition rate (duty factor) of 0.01 % or less (see Figures 1, 2 and 3 for tW, waveform and
derating eff ects).
3. At 3/8 (10 mm) lead length from body.
4. On FR4 PC board with 110C/W junction to ambient with 4 mm2 copper pads (1 oz) and track width 1
mm and length 25 mm.
RF01006, Rev. B (5/8/13) ©2013 Microsemi Corporation Page 2 of 6
MP4KE6.8A – MP4KE400CA(e3)
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
TERMINALS: Tin-lead or RoHS compliant anne aled matte-tin plating. Solder a ble per M IL-STD-750, method 2026.
MARKING: Part number.
POLARITY: Cathode indicated by band. Bi-dire cti onal not mark ed.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 0.3 grams.
See Package Dimensions on last page.
M P4K E 6.8 C A (e3)
Reliability Level*
M (controlled product)
MA (Avionics grade)
MX ( reference JANT X )
MXL (MX Lite)
(*See High Reliability Non-
Hermetic Product portfolio)
Point 4 kilowatt
Encapsulated Plastic
Package
RoHS Compli ance
e3 = RoHS compliant
Blank = non-RoHS compliant
Voltage Tolerance
A = 5% tolerance level
Blank = 10% tolerance
Polarity
C = Bi-directional
Blank = Unidirectional
Stand-off Voltage Rating
SYMBOLS & DEFINITIONS
Symbol
Definition
I(BR)
Breakdown Current: T he cur r ent used for measur i ng Break down Voltage V(BR).
ID
Standby Current: The current through the device at rated stand-off voltage.
IPP Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
P
PP
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I
PP
and V
C
.
V(BR)
Breakdown Voltage: The voltage across the device at a specified current I(BR) in the breakdown region.
V
C
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (IPP) for a specified waveform.
V
WM
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
RF01006, Rev. B (5/8/13) ©2013 Microsemi Corporation Page 3 of 6
MP4KE6.8A – MP4KE400CA(e3)
PART
NUMBER
(Note
2)
WORKING
STAND OFF
VOLTAGE
VWM
BREAKDOWN
VOLTAGE
V(BR) @
I(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC@
I
PP
MAXIMUM
STANDBY
CURRENT ID
@
V
WM
PEAK PULSE
CURRENT
(see Fig. 2)
IPP
MAXIMUM
TEMPERATURE
COEFFICIENT
of
V(
BR)
α
V(BR)
Volts
MIN
MAX
mA
Volts
µ
A
Amps
% /
°C
MP4KE6.8A
MP4KE7.5A
5.80
6.40
6.45
7.13
7.14
7.88
10
10
10.5
11.3
500
200
38
35
0.057
0.061
MP4KE8.2A
MP4KE9.1A
7.02
7.78
7.79
8.65
8.61
9.55
10
1
12.1
13.4
100
20
33
30
0.065
0.068
MP4KE10A
MP4KE11A
8.55
9.40
9.50
10.5
10.5
11.6
1
1
14.5
15.6
5
2
28
26
0.073
0.075
MP4KE12A
MP4KE13A
10.2
11.1
11.4
12.4
12.6
13.7
1
1
16.7
18.2
1
1
24
22
0.078
0.081
MP4KE15A
MP4KE16A
12.8
13.6
14.3
15.2
15.8
16.8
1
1
21.2
22.5
1
1
19
18
0.084
0.086
MP4KE18A
MP4KE20A
15.3
17.1
17.1
19.0
18.0
21.0
1
1
25.2
27.7
1
1
16
14.5
0.088
0.090
MP4KE22A
MP4KE24A
18.8
20.5
20.9
22.8
23.1
25.2
1
1
30.6
33.2
1
1
13
12
0.092
0.094
MP4KE27A
MP4KE30A
23.1
25.6
25.7
28.5
28.4
31.5
1
1
37.5
41.4
1
1
11
9.5
0.096
0.097
MP4KE33A
MP4KE36A
28.2
30.8
31.4
34.2
34.7
37.8
1
1
45.7
49.9
1
1
9.0
8.0
0.098
0.099
MP4KE39A
MP4KE43A
33.3
36.8
37.1
40.9
41.0
45.2
1
1
53.9
59.3
1
1
7.5
7.0
0.100
0.101
MP4KE47A
MP4KE51A
40.2
43.6
44.7
48.5
49.4
53.6
1
1
64.8
70.1
1
1
6.2
5.7
0.101
0.102
MP4KE56A
MP4KE62A
47.8
53.0
53.2
58.9
58.8
65.1
1
1
77.0
85.0
1
1
5.2
4.7
0.103
0.104
MP4KE68A
MP4KE75A
58.1
64.1
64.6
71.3
71.4
78.8
1
1
92.0
103.0
1
1
4.4
3.9
0.104
0.105
MP4KE82A
MP4KE91A
70.1
77.8
77.9
86.5
86.1
95.5
1
1
113.0
125.0
1
1
3.5
3.2
0.105
0.106
MP4KE100A
MP4KE110A
85.5
94.0
95.0
105.0
105.0
116.0
1
1
137.0
152.0
1
1
2.9
2.6
0.106
0.107
MP4KE120A
MP4KE130A
102.0
111.0
114.0
124.0
126.0
137.0
1
1
165.0
179.0
1
1
2.4
2.2
0.107
0.107
MP4KE150A
MP4KE160A
128.0
136.0
143.0
152.0
158.0
168.0
1
1
207.0
219.0
1
1
1.95
1.8
0.108
0.108
MP4KE170A
MP4KE180A
145.0
154.0
162.0
171.0
179.0
189.0
1
1
234.0
246.0
1
1
1.7
1.6
0.108
0.108
MP4KE200A
MP4KE220A
171.0
185.0
190.0
209.0
210.0
231.0
1
1
274.0
328.0
1
1
1.5
1.0
0.108
0.110
MP4KE250A
MP4KE300A
214.0
256.0
237.0
285.0
263.0
315.0
1
1
344.0
414.0
1
1
1.0
1.0
0.110
0.110
MP4KE350A
MP4KE400A
300.0
342.0
333.0
380.0
368.0
420.0
1
1
482.0
548.0
1
1
1.0
1.0
0.110
0.110
NOTE 1: Forward Voltage (VF) @ 30 amps peak, 8.3 ms sine wave equal to 3.5 volts maximum for MP4KE6.8A to 200A (excluding bidirect i onal ).
NOTE 2: For bidirectional construct i on, indic ate a CA suffix after part number. Bidirecti onal capaci t ance is half that shown in Figure 4 at zero
volts.
RF01006, Rev. B (5/8/13) ©2013 Microsemi Corporation Page 4 of 6
MP4KE6.8A – MP4KE400CA(e3)
twPulse Width
FIGURE 1
Peak Pulse Power vs. Pulse Time
t Time ms
FIGURE 2
Pulse Waveform for Exponential Surge
PPP -Peak Pulse Power (kW)
Pulse Current in Percent of I
PP
RF01006, Rev. B (5/8/13) ©2013 Microsemi Corporation Page 5 of 6
MP4KE6.8A – MP4KE400CA(e3)
Lead or Ambient Temperature °C
FIGURE 3
Derating Curve
V(BR)-Breakdown Voltage - Volts
FIGURE 4
MP4KE Typical Capacitance vs. Breakdown Voltage (Unipolar)
Peak Pulse Power (P
PP
) or continuous
Average Power in Percent of 25°C Rating
C Capacitance - Picofarads
RF01006, Rev. B (5/8/13) ©2013 Microsemi Corporation Page 6 of 6
MP4KE6.8A – MP4KE400CA(e3)
NOTES: Cathode indicated by band.
Dimensions
Dim
Inches
Millimeters
Min
Max
Min
Max
LL
1.00
-
25.4
-
BL
-
0.205
-
5.207
BD
-
0.107
-
2.72
LD
0.030
0.034
0.76
0.86