Product Folder Order Now Support & Community Tools & Software Technical Documents Reference Design LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 LMZ31710 10-A Power Module With 2.95-V to 17-V Input and Current Sharing in QFN Package 1 Features 3 Description * The LMZ31710 power module is an easy-to-use integrated power solution that combines a 10-A DC/DC converter with power MOSFETs, a shielded inductor, and passives into a low-profile QFN package. This total power solution allows as few as three external components and eliminates the loop compensation and magnetics part selection process. 1 * * * * * * * * * * * * * * * * * * Complete integrated power solution - Small footprint, low-profile design - Pin compatible with LMZ31707 and LMZ31704 - 10-mm x 10-mm x 4.3-mm package Efficiencies up to 95% Eco-ModeTM and light load efficiency (LLE) Wide-output voltage adjust 0.6 V to 5.5 V, With 1% reference accuracy Supports parallel operation for higher current Optional split power rail allows input voltage down to 2.95 V Adjustable switching frequency (200 kHz to 1.2 MHz) Synchronizes to an external clock Provides 180 out-of-phase clock signal Adjustable slow start Output voltage sequencing and tracking Power-good output Programmable undervoltage lockout (UVLO) Overcurrent and overtemperature protection Prebias output start-up Operating temperature range: -40C to +85C Enhanced thermal performance: 13.3C/W Meets EN55022 Class B emissions - integrated shielded inductor Create a custom design using the LMZ31710 with the WEBENCH(R) Power Designer 2 Applications * * * * Broadband and communications infrastructure Automated test and medical equipment Compact PCI / PCI Express / PXI express DSP and FPGA point-of-load applications The 10 x 10 x 4.3 mm QFN package is easy to solder onto a printed circuit board and allows a compact point-of-load design. The device achieves greater than 95% efficiency and excellent power dissipation capability with a thermal impedance of 13.3C/W. The LMZ31710 offers the flexibility and the feature set of a discrete point-of-load design and is ideal for powering a wide range of ICs and systems. Advanced packaging technology affords a robust and reliable power solution compatible with standard QFN mounting and testing techniques. Device Information(1) PART NUMBER LMZ31710 PACKAGE RVQ (42) BODY SIZE (NOM) 10.00 mm x 10.00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Simplified Application VIN CIN PVIN VIN ISHARE VOUT VOUT SENSE+ COUT LMZ31710 SYNC_OUT PWRGD INH/UVLO VADJ SS/TR RT/CLK STSEL AGND PGND RSET RRT 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com Table of Contents 1 2 3 4 5 6 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 7 1 1 1 2 3 5 Absolute Maximum Ratings ...................................... 5 ESD Ratings ............................................................ 5 Recommended Operating Conditions....................... 5 Thermal Information .................................................. 6 Electrical Characteristics.......................................... 6 Typical Characteristics (PVIN = VIN = 12 V) .............. 8 Typical Characteristics (PVIN = VIN = 5 V) ............... 9 Typical Characteristics (PVIN = 3.3 V, VIN = 5 V) ... 10 Detailed Description ............................................ 11 7.1 7.2 7.3 7.4 Overview ................................................................. Functional Block Diagram ....................................... Feature Description................................................. Device Functional Modes........................................ 11 11 12 24 8 Application and Implementation ........................ 26 8.1 Application Information............................................ 26 8.2 Typical Application .................................................. 26 8.3 Additional Application Schematics .......................... 27 9 Power Supply Recommendations...................... 28 10 Layout................................................................... 29 10.1 Layout Considerations .......................................... 29 10.2 Layout Examples................................................... 29 11 Device and Documentation Support ................. 31 11.1 11.2 11.3 11.4 11.5 11.6 11.7 Device Support...................................................... Documentation Support ........................................ Receiving Notification of Documentation Updates Support Resources ............................................... Trademarks ........................................................... Electrostatic Discharge Caution ............................ Glossary ................................................................ 31 31 31 31 31 32 32 12 Mechanical, Packaging, and Orderable Information ........................................................... 32 12.1 Tape and Reel Information ................................... 32 4 Revision History Changes from Revision E (December 2019) to Revision F * Updated Table 7 with correct values ................................................................................................................................... 23 Changes from Revision D (April 2019) to Revision E * Page Added VOUT Range values under different IOUT conditions in Table 7 .................................................................................. 23 Changes from Revision C (April 2018) to Revision D * Page Page Corrected TBD values in Synchronization Frequency vs Output Voltage Table.................................................................. 23 Changes from Revision B (June 2017) to Revision C Page * Added WEBENCH(R) design links for the LMZ31710 ............................................................................................................. 1 * Increased the peak reflow temperature and maximum number of reflows to JEDEC specifications for improved manufacturability..................................................................................................................................................................... 5 Changes from Revision A (July 2013) to Revision B Page * Changed Device Information and Pin Configuration and Functions sections, ESD Rating table, Feature Description, Device Functional Modes, Application and Implementation, Power Supply Recommendations, Layout, Device and Documentation Support , and Mechanical, Packaging, and Orderable Information sections ................................................ 1 * Added peak reflow and maximum number of reflows information ........................................................................................ 5 2 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 5 Pin Configuration and Functions PVIN 1 AGND 2 VIN 40 39 PGND PGND VOUT VOUT VOUT VOUT VOUT PVIN PVIN RVQ Package 42-Pin B3QFN (Top View) 38 37 36 35 34 33 32 31 PGND 30 INH/UVLO 3 29 STSEL OCP_SEL 4 28 SS/TR DNC 5 27 SENSE+ ILIM 6 26 VADJ SYNC_OUT 7 25 ISHARE PWRGD 8 24 DNC DNC 9 23 AGND 22 RT/CLK 21 PGND PH PGND PH PH PH 14 15 16 17 18 19 20 PH 12 13 PH 11 PH PVIN 42 PH 10 PVIN PH 41 VOUT Pin Functions PIN NAME NO. TYPE 2 AGND 23 DESCRIPTION - Zero volt reference for the analog control circuit. These pins are not connected together internal to the device and must be connected to one another using an AGND plane of the PCB. These pins are associated with the internal analog ground (AGND) of the device. Keep AGND separate from PGND, as a single connection is made internal to the device. See Layout. - This is the return current path for the power stage of the device. Connect these pins to the load and to the bypass capacitors associated with PVIN and VOUT. Keep PGND separate from AGND, as a single connection is made internal to the device. I Input bias voltage pin. Supplies the control circuitry of the power converter. Connect this pin to the input bias supply. Connect bypass capacitors between this pin and PGND. 20 21 PGND 31 32 33 VIN 3 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 3 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com Pin Functions (continued) PIN NAME NO. TYPE DESCRIPTION I Input switching voltage. Supplies voltage to the power switches of the converter. Connect these pins to the input supply. Connect bypass capacitors between these pins and PGND. O Output voltage. These pins are connected to the internal output inductor. Connect these pins to the output load and connect external bypass capacitors between these pins and PGND. O Phase switch node. These pins must be connected to one another using a small copper island under the device for thermal relief. Do not place any external component on these pins or tie them to a pin of another function. - Do Not Connect. Do not connect these pins to AGND, to another DNC pin, or to any other voltage. These pins are connected to internal circuitry. Each pin must be soldered to an isolated pad. 1 11 PVIN 12 39 40 34 35 36 VOUT 37 38 41 10 13 14 15 PH 16 17 18 19 42 5 DNC 9 24 ISHARE 25 O Current share pin. Connect this pin to the ISHARE pin of the other LMZ31710 when paralleling multiple LMZ31710 devices. When unused, treat this pin as a Do Not Connect (DNC) and leave it isolated from all other signals or ground. OCP_SEL 4 I Overcurrent protection select pin. Leave this pin open for hiccup mode operation. Connect this pin to AGND for cycle-by-cycle operation. See the Overcurrent Protection section for more details. ILIM 6 I Current limit pin. Leave this pin open for full current limit threshold. Connect this pin to AGND to reduce the current limit threshold by approximately 3 A. SYNC_OU T 7 O Synchronization output pin. Provides a 180 out-of-phase clock signal. PWRGD 8 O Power Good flag pin. This open drain output asserts low if the output voltage is more than approximately 6% out of regulation. A pullup resistor is required. RT/CLK 22 I This pin is connected to an internal frequency setting resistor which sets the default switching frequency. An external resistor can be connected from this pin to AGND to increase the frequency. This pin can also be used to synchronize to an external clock. VADJ 26 I Connecting a resistor between this pin and AGND sets the output voltage. SENSE+ 27 O Remote sense connection. This pin must be connected to VOUT at the load or at the device pins. Connect this pin to VOUT at the load for improved regulation. SS/TR 28 I Slow-start and tracking pin. Connecting an external capacitor to this pin adjusts the output voltage rise time. A voltage applied to this pin allows for tracking and sequencing control. STSEL 29 I Slow start or track feature select. Connect this pin to AGND to enable the internal SS capacitor. Leave this pin open to enable the TR feature. INH/UVLO 30 I Inhibit and UVLO adjust pin. Use an open drain or open collector logic device to ground this pin to control the INH function. A resistor divider between this pin, AGND, and PVIN/VIN sets the UVLO voltage. 4 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN Input voltage Output voltage Source current Sink current MAX UNIT VIN, PVIN -0.3 20 V INH/UVLO, PWRGD, RT/CLK, SENSE+ -0.3 6 V ILIM, VADJ, SS/TR, STSEL, SYNC_OUT, ISHARE, OCP_SEL -0.3 3 V PH -1.0 20 V PH 10ns Transient -3.0 20 V VOUT -0.3 10 V 100 A PH current limit A PH current limit A PVIN current limit RT/CLK, INH/UVLO PWRGD A -0.1 2 mA Operating junction temperature -40 125 (2) C Storage temperature, Tstg -65 150 C Peak Reflow Case Temperature (3) Maximum Number of Reflows Allowed 245 (4) (3) 3 Mechanical shock Mil-STD-883D, Method 2002.3, 1 msec, 1/2 sine, mounted Mechanical vibration Mil-STD-883D, Method 2007.2, 20-2000 Hz (1) (2) (3) (4) C (4) 1500 G 20 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. See the temperature derating curves in the Typical Characteristics section for thermal information. For soldering specifications, refer to the Soldering Requirements for BQFN Packages application note. Devices with a date code prior to week 14 2018 (1814) have a peak reflow case temperature of 240C with a maximum of one reflow. 6.2 ESD Ratings VALUE V(ESD) (1) (2) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1) 1500 Charged-device model (CDM), per JEDEC specification JESD22-C101 (2) 1000 UNIT V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) MIN Input switching voltage, PVIN NOM MAX UNIT 2.95 17 V Input bias voltage, VIN 4.5 17 V Output voltage, VOUT 0.6 5.5 V Switching frequency, SW 200 1200 kHz Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 5 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 6.4 Thermal Information LMZ31710 THERMAL METRIC (1) RVQ (B3QFN) UNIT 42 PINS RJA Junction-to-ambient thermal resistance (2) RJB Junction-to-board thermal resistance JT Junction-to-top characterization parameter (4) (1) (2) (3) (4) 13.3 C/W 1.6 C/W 5.3 C/W (3) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report. The junction-to-ambient thermal resistance, RJA, applies to devices soldered directly to a 100 mm x 100 mm double-sided PCB with 2 oz. copper and natural convection cooling. Additional airflow reduces RJA. The junction-to-top characterization parameter, JT, estimates the junction temperature, TJ, of a device in a real system, using a procedure described in JESD51-2A (sections 6 and 7). TJ = JT x Pdis + TT; where Pdis is the power dissipated in the device and TT is the temperature of the top of the device. The junction-to-board characterization parameter, JB, estimates the junction temperature, TJ, of a device in a real system, using a procedure described in JESD51-2A (sections 6 and 7). TJ = JB x Pdis + TB; where Pdis is the power dissipated in the device and TB is the temperature of the board 1 mm from the device. 6.5 Electrical Characteristics Over -40C to 85C free-air temperature, PVIN = VIN = 12 V, VOUT = 1.8 V, IOUT = 10 A, CIN = 0.1 F + 2 x 22 F ceramic + 100 F bulk, COUT = 4 x 47 F ceramic (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT IOUT Output current TA = 85C, natural convection 0 (1) 10 A VIN Input bias voltage range Over output current range 4.5 17 V PVIN Input switching voltage range Over output current range 2.95 (2) 17 (3) V UVLO VIN undervoltage lockout VOUT(adj) VOUT VIN Increasing 4 VIN Decreasing 3.5 Output voltage adjust range Over output current range 0.6 Set-point voltage tolerance TA = 25C, IOUT = 0 A Temperature variation -40C TA +85C, IOUT = 0 A 0.2% Line regulation Over input voltage range 0.1% Load regulation Over output current range 0.2% Total output voltage variation Includes set-point, line, load, and temperature variation Efficiency PVIN = VIN = 5 V IO = 5 A Output voltage ripple ILIM (1) (2) (3) (4) (5) 6 Current limit threshold 3.85 5.5 (4) V V 1% (5) 1.5% (5) VOUT = 5 V, fSW = 1 MHz 93% VOUT = 3.3 V, fSW = 750 kHz 92% VOUT = 2.5 V, fSW = 750 kHz 90% PVIN = VIN = 12 V VOUT = 1.8 V, fSW = 500 kHz IO = 5 A VOUT = 1.2 V, fSW = 300 kHz 4.5 89% 86% VOUT = 0.9 V, fSW = 250 kHz 84% VOUT = 0.6 V, fSW = 200 kHz 81% VOUT = 3.3 V, fSW = 750 kHz 94% VOUT = 2.5 V, fSW = 750 kHz 93% VOUT = 1.8 V, fSW = 500 kHz 92% VOUT = 1.2 V, fSW = 300 kHz 89% VOUT = 0.9 V, fSW = 250 kHz 87% VOUT = 0.6 V, fSW = 200 kHz 83% 20 MHz bandwidth 14 mVP-P ILIM pin open 15 A ILIM pin to AGND 12 A See Light Load Efficiency (LLE) for more information for output voltages < 1.5 V. The minimum PVIN is 2.95 V or (VOUT + 0.7 V), whichever is greater. See Table 7 for more details. The maximum PVIN voltage is 17 V or (22 x VOUT), whichever is less. See Table 7 for more details. The maximum output voltage may be limited by the power dissipation. The maximum power dissipation of this device is 4.5 W. The stated limit of the set-point voltage tolerance includes the tolerance of both the internal voltage reference and the internal adjustment resistor. The overall output voltage tolerance will be affected by the tolerance of the external RSET resistor. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 Electrical Characteristics (continued) Over -40C to 85C free-air temperature, PVIN = VIN = 12 V, VOUT = 1.8 V, IOUT = 10 A, CIN = 0.1 F + 2 x 22 F ceramic + 100 F bulk, COUT = 4 x 47 F ceramic (unless otherwise noted) PARAMETER Transient response VINH Inhibit threshold voltage IINH II(stby) TEST CONDITIONS 1 A/s load step from 25 to 75% IOUT(max) Inhibit Low Voltage -0.3 1.1 VINH < 1.1 V -1.15 INH Hysteresis current VINH > 1.3 V -3.3 Input standby current INH pin to AGND VOUT falling PWRGD Low Voltage I(PWRGD) = 0.5 mA Switching frequency RRT = 169 k CLK Synchronization frequency VCLK-H CLK High-Level VCLK-L CLK Low-Level DCLK CLK Duty Cycle External input capacitance COUT External output capacitance 2 Good 95% Fault 108% Fault 91% Good 104% CLK Control (7) (8) (9) A A 10 V kHz 200 1200 kHz 2 5.5 V 0.5 V Thermal shutdown Thermal shutdown hysteresis 500 50% 80% 175 C 10 C 44 (7) F 100 (7) Non-ceramic VOUT = 0.6 V to 5.5 V Ceramic VOUT = 0.6 V to 5.5 V Non-ceramic A 0.3 20% Ceramic V 600 400 Equivalent series resistance (ESR) (6) s mV open (6) PWRGD Thresholds UNIT 80 INH Input current Thermal Shutdown MAX 100 1.3 SW CIN VOUT over/undershoot TYP Inhibit High Voltage VOUT rising Power Good MIN Recovery time 47 (8) 200 1500 220 (8) 5000 (9) 35 F m Value when no voltage divider is present at the INH/UVLO pin. This pin has an internal pullup. If it is left open, the device operates when input power is applied. A small, low-leakage MOSFET is recommended for control. Do not tie this pin to VIN. A minimum of 44 F of external ceramic capacitance is required across the input (VIN and PVIN connected) for proper operation. An additional 100 F of bulk capacitance is recommended. It is also recommended to place a 0.1 F ceramic capacitor directly across the PVIN and PGND pins of the device. Locate the input capacitance close to the device. When operating with split VIN and PVIN rails, place 4.7 F of ceramic capacitance directly at the VIN pin. See Table 4 for more details. The amount of required output capacitance varies depending on the output voltage (see Table 3). The amount of required capacitance must include at least 1 x 47 F ceramic capacitor. Locate the capacitance close to the device. Adding additional capacitance close to the load improves the response of the regulator to load transients. See Table 3 and Table 4 more details. The maximum output capacitance of 5000 F includes the combination of both ceramic and non-ceramic capacitors. It may be necessary to increase the slow-start time when turning on into the maximum capacitance. See the Slow Start (SS/TR) section for information on adjusting the slow-start time. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 7 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 6.6 Typical Characteristics (PVIN = VIN = 12 V) The electrical characteristic data has been developed from actual products tested at 25C. This data is considered typical for the converter. Applies to Figure 1, Figure 2, and Figure 3. The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to devices soldered directly to a 100-mm x 100-mm double-sided PCB with 2-oz. copper. Applies to Figure 5 and Figure 6. 30 100 Output Ripple Voltage (mV) 90 70 Vo = 5.0V, fsw = 1MHz Vo = 3.3V, fsw = 750kHz Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz 60 50 40 0 1 2 3 4 5 6 7 8 9 25 20 15 10 5 0 10 Output Current (A) 3.5 3.0 Gain (dB) Power Dissipation (W) 4.0 2.5 2.0 1.5 10 C004 40 120 30 90 20 60 10 30 0 0 30 10 60 Gain 90 30 0.5 Phase 0.0 0 2 4 6 8 Output Current (A) 10 40 1000 Frequency (Hz) 80 80 Ambient Temperature (C) 90 70 60 Airflow = 0 LFM 40 9R " 9 IVZ N+] Vo = 2.5V, fsw = 750kHz Vo = 3.3V, fsw = 750kHz Vo = 5.0V, fsw = 1MHz 30 20 0 2 4 6 Output Current (A) 8 C006 70 60 50 Airflow = 200 LFM 40 9R " 9 IVZ N+] Vo = 2.5V, fsw = 750kHz Vo = 3.3V, fsw = 750kHz Vo = 5.0V, fsw = 1MHz 30 20 10 120 400k 100k Figure 4. VOUT = 1.8 V, IOUT = 10 A, COUT1 = 200 f Ceramic, FSW = 500 Khz 90 50 10k C004 Figure 3. Power Dissipation versus Output Current Ambient Temperature (C) 8 20 1.0 0 C001 Figure 5. Safe Operating Area 8 6 Figure 2. Voltage Ripple versus Output Current Vo = 5.0V, fsw = 1MHz Vo = 3.3V, fsw = 750kHz Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz 4.5 4 Output Current (A) Figure 1. Efficiency versus Output Current 5.0 2 C001 Phase () Efficiency (%) 80 Vo = 5.0V, fsw = 1MHz Vo = 3.3V, fsw = 750kHz Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz 2 4 6 Output Current (A) 8 10 C001 Figure 6. Safe Operating Area Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 6.7 Typical Characteristics (PVIN = VIN = 5 V) The electrical characteristic data has been developed from actual products tested at 25C. This data is considered typical for the converter. Applies to Figure 7, Figure 8, and Figure 9. The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to devices soldered directly to a 100-mm x 100-mm double-sided PCB with 2-oz. copper. Applies to Figure 11. 100 30 Output Voltage Ripple (mV) 80 70 Vo = 3.3V, fsw = 750kHz Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz Vo = 0.6V, fsw = 200kHz 60 50 40 0 1 2 3 4 5 6 7 8 9 Output Current (A) 25 20 15 10 5 10 0 3.5 3.0 Gain (dB) Power Dissipation (W) 4.0 6 8 10 C004 Figure 8. Voltage Ripple versus Output Current Vo = 3.3V, fsw = 750kHz Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz Vo = 0.6V, fsw = 200kHz 4.5 4 Output Current (A) Figure 7. Efficiency versus Output Current 5.0 2 C001 2.5 2.0 1.5 40 120 30 90 20 60 10 30 0 0 30 10 60 20 1.0 Phase () Efficiency (%) 90 Vo = 3.3V, fsw = 750kHz Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz Vo = 0.6V, fsw = 200kHz Gain 90 0.5 30 0.0 40 1000 Phase 0 2 4 6 8 10 Output Current (A) 10k 100k 120 400k Frequency (Hz) C004 Figure 9. Power Dissipation versus Output Current C006 Figure 10. VOUT = 1.8 V, IOUT = 10 A, COUT1 = 200 f Ceramic, FSW = 500 Khz 90 Ambient Temperature (C) 80 70 60 50 Airflow = 0 LFM 40 All Output Voltages 30 20 0 2 4 6 8 Output Current (A) 10 C001 Figure 11. Safe Operating Area Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 9 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 6.8 Typical Characteristics (PVIN = 3.3 V, VIN = 5 V) The electrical characteristic data has been developed from actual products tested at 25C. This data is considered typical for the converter. Applies to Figure 12, Figure 13, and Figure 14. The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to devices soldered directly to a 100-mm x 100-mm double-sided PCB with 2-oz. copper. Applies to Figure 16. 100 30 Output Ripple Voltage (mV) 90 70 Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz 60 Vo = 1.2V, fsw = 300kHz 50 Vo = 0.9V, fsw = 250kHz Vo = 0.6V, fsw = 200kHz 40 0 1 2 3 4 5 6 7 8 9 Output Current (A) 25 20 15 10 5 10 0 3.5 3.0 Gain (dB) Power Dissipation (W) 4.0 6 8 10 C004 Figure 13. Voltage Ripple versus Output Current Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz Vo = 0.6V, fsw = 200kHz 4.5 4 Output Current (A) Figure 12. Efficiency versus Output Current 5.0 2 C001 2.5 2.0 1.5 40 120 30 90 20 60 10 30 0 0 30 10 60 20 1.0 Phase () Efficiency (%) 80 Vo = 2.5V, fsw = 750kHz Vo = 1.8V, fsw = 500kHz Vo = 1.2V, fsw = 300kHz Vo = 0.9V, fsw = 250kHz Vo = 0.6V, fsw = 200kHz Gain 90 0.5 30 0.0 40 1000 Phase 0 2 4 6 8 10 Output Current (A) 10k Frequency (Hz) C004 Figure 14. Power Dissipation versus Output Current 100k 120 400k C006 Figure 15. VOUT = 1.8 V, IOUT = 10 A, COUT1 = 200 f Ceramic, FSW = 500 Khz 90 Ambient Temperature (C) 80 70 60 50 Airflow = 0 LFM 40 All Output Voltages 30 20 0 2 4 6 8 Output Current (A) 10 C001 Figure 16. Safe Operating Area 10 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 7 Detailed Description 7.1 Overview The LMZ31710 is a full-featured 2.95-V to 17-V input, 10-A, synchronous step-down converter with PWM, MOSFETs, inductor, and control circuitry integrated into a low-profile, overmolded package. This device enables small designs by integrating all but the input and output capacitors, while still leaving the ability to adjust key parameters to meet specific design requirements. The LMZ31710 provides a wide output voltage range of 0.6 V to 5.5 V. In most applications, a single external resistor is used to adjust the output voltage. The switching frequency is also adjustable by using an external resistor or a synchronization pulse to accommodate various input/output voltage conditions and to optimize efficiency. The device provides accurate voltage regulation for a variety of loads by using an internal voltage reference that is 1% accurate over temperature. The INH/UVLO pin can be pulled low to put the device in standby mode to reduce input quiescent current. The input undervoltage lockout can be adjusted using a resistor divider on the IN/UVLO pin of the device. The device provides a powergood signal to indicate when the output is within 5% of its nominal voltage. The ability to parallel the LMZ31710 allows it to be used in higher current applications. Thermal shutdown and current limit features protect the device during an overload condition. Automatic pulse skip mode improves light-load efficiency. A 42-pin, QFN, package that includes exposed bottom pads provides a thermally enhanced solution for space-constrained applications. 7.2 Functional Block Diagram OCP_SEL ILIM OCP INH/UVLO Shutdown Logic PWRGD VIN Thermal Shutdown SENSE+ VIN UVLO PWRGD Logic PVIN + + PH VADJ SS/TR VREF Comp STSEL Current Share ISHARE SYNC_OUT RT/CLK Power Stage and Control Logic VOUT Oscillator with PLL PGND AGND LMZ31710 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 11 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 7.3 Feature Description 7.3.1 VIN and PVIN Input Voltage The LMZ31710 allows for a variety of applications by using the VIN and PVIN pins together or separately. The VIN voltage supplies the internal control circuits of the device. The PVIN voltage provides the input voltage to the power converter system. If tied together, the input voltage for the VIN pin and the PVIN pin can range from 4.5 V to 17 V. If you are using the VIN pin separately from the PVIN pin, the VIN pin must be greater than 4.5 V, and the PVIN pin can range from as low as 2.95 V to 17 V. When operating from a split rail, it is recommended to supply VIN from 5 V to 12 V for best performance. A voltage divider connected to the INH/UVLO pin can adjust either input voltage UVLO appropriately. See the Programmable Undervoltage Lockout (UVLO) section for more information. 7.3.2 3.3-V PVIN Operation Applications operating from a PVIN of 3.3 V must provide at least 4.5 V for VIN. It is recommended to supply VIN from 5 V to 12 V for best performance. See the Powering LMZ3 SIMPLE SWITCHER Power Modules From 3.3 V Application Note for help creating 5 V from 3.3 V using a small, simple charge pump device. 7.3.3 Adjusting the Output Voltage (0.6 V to 5.5 V) The VADJ control sets the output voltage of the LMZ31710. The output voltage adjustment range of the LMZ31710 is from 0.6 V to 5.5 V. The adjustment method requires the addition of RSET, which sets the output voltage, the connection of SENSE+ to VOUT, and in some cases, RRT which sets the switching frequency. The RSET resistor must be connected directly between the VADJ (pin 26) and AGND (pin 23). The SENSE+ pin (pin 27) must be connected to VOUT either at the load for improved regulation or at VOUT of the device. The RRT resistor must be connected directly between the RT/CLK (pin 22) and AGND (pin 23). Table 1 gives the standard external RSET resistor for a number of common bus voltages, along with the recommended RRT resistor for that output voltage. Table 1. Standard RSET Resistor Values for Common Output Voltages RESISTORS OUTPUT VOLTAGE VOUT (V) 0.9 1.0 1.2 1.8 2.5 3.3 5.0 RSET (k) 2.87 2.15 1.43 0.715 0.453 0.316 0.196 RRT (k) 1000 1000 487 169 90.9 90.9 63.4 For other output voltages, the value of the required resistor can either be calculated using the following formula, or simply selected from the range of values given in Table 2. 1.43 RSET = 12 VOUT (( 0.6 ) ) (k ) -1 (1) Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 Table 2. Standard RSET Resistor Values VOUT (V) RSET (k) RRT(k) fSW(kHz) VOUT (V) RSET (k) RRT(k) fSW(kHz) 0.6 open OPEN 200 3.1 0.348 90.9 750 0.7 8.66 OPEN 200 3.2 0.332 90.9 750 0.8 4.32 OPEN 200 3.3 0.316 90.9 750 0.9 2.87 1000 250 3.4 0.309 90.9 750 1.0 2.15 1000 250 3.5 0.294 90.9 750 1.1 1.74 1000 250 3.6 0.287 90.9 750 1.2 1.43 487 300 3.7 0.280 90.9 750 1.3 1.24 487 300 3.8 0.267 90.9 750 1.4 1.07 487 300 3.9 0.261 90.9 750 1.5 0.953 487 300 4.0 0.255 90.9 750 1.6 0.866 487 300 4.1 0.243 63.4 1000 1.7 0.787 487 300 4.2 0.237 63.4 1000 1.8 0.715 169 500 4.3 0.232 63.4 1000 1.9 0.665 169 500 4.4 0.226 63.4 1000 2.0 0.619 169 500 4.5 0.221 63.4 1000 2.1 0.576 169 500 4.6 0.215 63.4 1000 2.2 0.536 169 500 4.7 0.210 63.4 1000 2.3 0.511 169 500 4.8 0.205 63.4 1000 2.4 0.475 169 500 4.9 0.200 63.4 1000 2.5 0.453 90.9 750 5.0 0.196 63.4 1000 2.6 0.432 90.9 750 5.1 0.191 63.4 1000 2.7 0.412 90.9 750 5.2 0.187 63.4 1000 2.8 0.392 90.9 750 5.3 0.182 63.4 1000 2.9 0.374 90.9 750 5.4 0.178 63.4 1000 3.0 0.357 90.9 750 5.5 0.174 63.4 1000 7.3.4 Capacitor Recommendations For the LMZ31710 Power Supply 7.3.4.1 Capacitor Technologies 7.3.4.1.1 Electrolytic, Polymer-Electrolytic Capacitors When using electrolytic capacitors, high-quality, computer-grade electrolytic capacitors are recommended. Polymer-electrolytic type capacitors are recommended for applications where the ambient operating temperature is less than 0C. The Sanyo OS-CON capacitor series is suggested due to the following: * Lower ESR * Higher rated surge * Power dissipation * Ripple current capability * Small package size Aluminum electrolytic capacitors provide adequate decoupling over the frequency range of 2 kHz to 150 kHz, and are suitable when ambient temperatures are above 0C. 7.3.4.1.2 Ceramic Capacitors The performance of aluminum electrolytic capacitors is less effective than ceramic capacitors above 150 kHz. Multilayer ceramic capacitors have a low ESR and a resonant frequency higher than the bandwidth of the regulator. They can be used to reduce the reflected ripple current at the input as well as improve the transient response of the output. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 13 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 7.3.4.1.3 Tantalum, Polymer-Tantalum Capacitors Polymer-tantalum type capacitors are recommended for applications where the ambient operating temperature is less than 0C. The Sanyo POSCAP series and Kemet T530 capacitor series are recommended rather than many other tantalum types due to the following: * Lower ESR * Higher rated surge * Power dissipation * Ripple current capability * Small package size Tantalum capacitors that have no stated ESR or surge current rating are not recommended for power applications. 7.3.4.2 Input Capacitor The LMZ31710 requires a minimum input capacitance of 44 F of ceramic type. An additional 100 F of nonceramic capacitance is recommended for applications with transient load requirements. The voltage rating of input capacitors must be greater than the maximum input voltage. At worst case, when operating at 50% duty cycle and maximum load, the combined ripple current rating of the input capacitors must be at least 5 Arms. Table 4 includes a preferred list of capacitors by vendor. It is also recommended to place a 0.1-F ceramic capacitor directly across the PVIN and PGND pins of the device. When operating with split VIN and PVIN rails, place 4.7 F of ceramic capacitance directly at the VIN pin. 7.3.4.3 Output Capacitor The required output capacitance is determined by the output voltage of the LMZ31710. See Table 3 for the amount of required capacitance. The effects of temperature and capacitor voltage rating must be considered when selecting capacitors to meet the minimum required capacitance. The required output capacitance can be comprised of all ceramic capacitors, or a combination of ceramic and bulk capacitors. The required capacitance must include at least one 47-F ceramic. When adding additional non-ceramic bulk capacitors, low-ESR devices like the ones recommended in Table 4 are required. The required capacitance above the minimum is determined by actual transient deviation requirements. See Table 5 for typical transient response values for several output voltage, input voltage, and capacitance combinations. Table 4 includes a preferred list of capacitors by vendor. Table 3. Required Output Capacitance VOUT RANGE (V) (1) MINIMUM REQUIRED COUT (F) MIN MAX 0.6 < 0.8 500 F (1) 0.8 < 1.2 300 F (1) 1.2 < 3.0 200 F (1) 3.0 < 4.0 100 F (1) 4.0 5.5 47 F ceramic Minimum required must include at least one 47-F ceramic capacitor. Table 4. Recommended Input/Output Capacitors (1) CAPACITOR CHARACTERISTICS VENDOR SERIES PART NUMBER WORKING VOLTAGE (V) CAPACITANCE (F) ESR (2) (m) Murata X5R GRM32ER61E226K 25 22 2 TDK X5R C3225X5R0J107M 6.3 100 2 TDK X5R C3225X5R0J476K 6.3 47 2 Murata X5R GRM32ER60J107M 6.3 100 2 (1) (2) 14 Capacitor Supplier Verification, RoHS, Lead-free, and Material Details Consult capacitor suppliers regarding availability, material composition, RoHS and lead-free status, and manufacturing process requirements for any capacitors identified in this table. Maximum ESR at 100 kHz, 25C. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 Table 4. Recommended Input/Output Capacitors() (continued) CAPACITOR CHARACTERISTICS VENDOR SERIES Murata X5R PART NUMBER WORKING VOLTAGE (V) CAPACITANCE (F) ESR (2) (m) GRM32ER60J476M 6.3 47 2 Panasonic EEH-ZA EEH-ZA1E101XP 25 100 30 Sanyo POSCAP 16TQC68M 16 68 50 Kemet T520 T520V107M010ASE025 10 100 25 Sanyo POSCAP 10TPE220ML 10 220 25 Sanyo POSCAP 6TPE100MI 6.3 100 25 Sanyo POSCAP 2R5TPE220M7 2.5 220 7 Kemet T530 T530D227M006ATE006 6.3 220 6 Kemet T530 T530D337M006ATE010 6.3 330 10 Sanyo POSCAP 2TPF330M6 2.0 330 6 Sanyo POSCAP 6TPE330MFL 6.3 330 15 7.3.5 Transient Response Table 5. Output Voltage Transient Response CIN1 = 3x 47-F CERAMIC, CIN2 = 100-F POLYMER-TANTALUM VOLTAGE DEVIATION (mV) VOUT (V) 0.6 COUT1 CERAMIC COUT2 BULK 2.5-A LOAD STEP, (1 A/s) 5-A LOAD STEP, (1 A/s) 5 500 F 220 F 25 60 100 12 500 F 220 F 30 65 100 300 F 220 F 40 85 100 300 F 470 F 35 70 110 300 F 220 F 45 90 100 300 F 470 F 35 75 110 200 F 220 F 55 110 110 200 F 470 F 45 90 110 200 F 220 F 55 110 110 200 F 470 F 45 90 110 200 F 220 F 70 140 130 200 F 470 F 60 120 140 200 F 220 F 70 145 140 200 F 470 F 55 120 150 5 100 F 220 F 115 230 200 12 100 F 220 F 120 240 200 5 0.9 12 5 1.2 12 5 1.8 12 3.3 RECOVERY TIME (s) VIN (V) Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 15 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 7.3.5.1 Transient Response Waveforms PVin = 12 V Vout = 0.9 V 2.5-A Load Step Figure 17. Transient Response (12 V to 0.9 V) PVin = 12 V Vout = 1.2 V 2.5-A Load Step Figure 19. Transient Response (12 V to 1.2 V) 16 PVin = 5 V Vout = 0.9 V 2.5-A Load Step Figure 18. Transient Response (5 V to 0.9 V) PVin = 5 V Vout = 1.2 V 2.5-A Load Step Figure 20. Transient Response (5 V to 1.2 V) Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 PVin = 12 V Vout = 1.8 V 2.5-A Load Step Figure 21. Transient Response (12 V to 1.8 V) PVin = 5 V Vout = 1.8 V 2.5-A Load Step Figure 22. Transient Response (5 V to 1.8 V) 7.3.6 Power Good (PWRGD) The PWRGD pin is an open-drain output. Once the voltage on the SENSE+ pin is between 95% and 104% of the set voltage, the PWRGD pin pulldown is released, and the pin floats. The recommended pullup resistor value is between 10 k and 100 k to a voltage source that is 5.5 V or less. The PWRGD pin is in a defined state once VIN is greater than 1 V, but with reduced current sinking capability. The PWRGD pin achieves full current sinking capability once the VIN pin is above 4.5 V. The PWRGD pin is pulled low when the voltage on SENSE+ is lower than 91% or greater than 108% of the nominal set voltage. Also, the PWRGD pin is pulled low if the input UVLO or thermal shutdown is asserted, the INH pin is pulled low, or the SS/TR pin is below 1.4 V. 7.3.7 Light Load Efficiency (LLE) The LMZ31710 operates in pulse skip mode at light load currents to improve efficiency and decrease power dissipation by reducing switching and gate drive losses. These pulses can cause the output voltage to rise when there is no load to discharge the energy. For output voltages < 1.5 V, a minimum load is required. The amount of required load can be determined by Equation 2. In most cases, the minimum current drawn by the load circuit will be enough to satisfy this load. For applications requiring a load resistor to meet the minimum load, the added power dissipation will be 3.6 mW. A single 0402 size resistor across VOUT and PGND can be used. (2) When VOUT = 0.6 V and RSET = OPEN, the minimum load current is 600 A. 7.3.8 SYNC_OUT The LMZ31710 provides a 180 out-of-phase clock signal for applications requiring synchronization. The SYNC_OUT pin produces a 50% duty cycle clock signal that is the same frequency as the switching frequency of the device, but is 180 out-of-phase. Operating two devices 180 out-of-phase reduces input and output voltage ripple. The SYNC_OUT clock signal is compatible with other LMZ3 devices that have a CLK input. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 17 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 7.3.9 Parallel Operation Up to six LMZ31710 devices can be paralleled for increased output current. Multiple connections must be made between the paralleled devices and the component selection is slightly different than for a stand-alone LMZ31710 device. A typical LMZ31710 parallel schematic is shown in Figure 23. Refer to the LMZ31710 Parallel Operation Application Note for information and design help when paralleling multiple LMZ31710 devices. Additionally, an EVM featuring two LMZ31710 devices operating in parallel can be evaluated using the LMZ31710 Parallel User's Guide. VIN = 12V PWRGD VIN PVIN SENSE+ 220F 22F 0.1F VO = 1.8V VOUT LMZ31710 22F 100F 100F VADJ SS/TR PGND RSET 715 0.1F LMZ31710 PWRGD SENSE+ VOUT SYNC_OUT RT/CLK 330F VADJ VIN PVIN 100F AGND CSS SS/TR Voltage Supervisor CSH INH Control ISHARE 5V 100F STSEL ISHARE RRT 169k INH/UVLO Sync Freq 500KHz INH/UVLO SYNC_OUT RT/CLK STSEL AGND RRT 169k PGND Figure 23. Typical LMZ31710 Parallel Schematic 7.3.10 Power-Up Characteristics When configured as shown in the application circuit on the first page, the LMZ31710 produces a regulated output voltage following the application of a valid input voltage. During the power-up, internal soft-start circuitry slows the rate that the output voltage rises, thereby limiting the amount of in-rush current that can be drawn from the input source. Figure 24 shows the start-up waveforms for a LMZ31710, operating from a 5-V input (PVIN = VIN) and with the output voltage adjusted to 1.8 V. Figure 25 shows the start-up waveforms for a LMZ31710 starting up into a pre-biased output voltage. The waveforms were measured with a 5-A constant current load. 18 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 Figure 24. Start-Up Waveforms Figure 25. Start-Up Into Pre-Bias 7.3.11 Pre-Biased Start-Up The LMZ31710 has been designed to prevent the low-side MOSFET from discharging a pre-biased output. During pre-biased startup, the low-side MOSFET does not turn on until the high-side MOSFET has started switching. The high-side MOSFET does not start switching until the slow start voltage exceeds the voltage on the VADJ pin. See Figure 25. 7.3.12 Remote Sense The SENSE+ pin must be connected to VOUT at the load, or at the device pins. Connecting the SENSE+ pin to VOUT at the load improves the load regulation performance of the device by allowing it to compensate for any I-R voltage drop between its output pins and the load. An I-R drop is caused by the high output current flowing through the small amount of pin and trace resistance. This must be limited to a maximum of 300 mV. NOTE The remote sense feature is not designed to compensate for the forward drop of nonlinear or frequency dependent components that can be placed in series with the converter output. Examples include OR-ing diodes, filter inductors, ferrite beads, and fuses. When these components are enclosed by the SENSE+ connection, they are effectively placed inside the regulation control loop, which can adversely affect the stability of the regulator. 7.3.13 Thermal Shutdown The internal thermal shutdown circuitry forces the device to stop switching if the junction temperature exceeds 175C typically. The device reinitiates the power-up sequence when the junction temperature drops below 165C typically. 7.3.14 Output On/Off Inhibit (INH) The INH pin provides electrical on/off control of the device. Once the INH pin voltage exceeds the threshold voltage, the device starts operation. If the INH pin voltage is pulled below the threshold voltage, the regulator stops switching and enters low quiescent current state. The INH pin has an internal pullup current source, allowing the user to float the INH pin for enabling the device. If an application requires controlling the INH pin, use an open-drain/collector device, or a suitable logic gate to interface with the pin. Using a voltage supervisor to control the INH pin allows control of the turnon and turnoff of the device as opposed to relying on the ramp up or down if the input voltage source. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 19 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com Figure 26 shows the typical application of the inhibit function. Turning Q1 on applies a low voltage to the inhibit control (INH) pin and disables the output of the supply, shown in Figure 27. If Q1 is turned off, the supply executes a soft-start power-up sequence, as shown in Figure 28. A regulated output voltage is produced within 2 ms. The waveforms were measured with a 5-A constant current load. INH/UVLO Q1 INH Control AGND STSEL SS/TR Figure 26. Typical Inhibit Control Figure 27. Inhibit Turnoff Figure 28. Inhibit Turnon 7.3.15 Slow Start (SS/TR) Connecting the STSEL pin to AGND and leaving SS/TR pin open enables the internal SS capacitor with a slowstart interval of approximately 1.2 ms. Adding additional capacitance between the SS pin and AGND increases the slow-start time. Increasing the slow-start time will reduce inrush current seen by the input source and reduce the current seen by the device when charging the output capacitors. To avoid the activation of current limit and ensure proper start-up, the SS capacitor may need to be increased when operating near the maximum output capacitance limit. Table 6 shows an additional SS capacitor connected to the SS/TR pin and the STSEL pin connected to AGND. See Table 6 for SS capacitor values and timing interval. 20 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 SS/TR CSS (Optional) AGND STSEL Figure 29. Slow-Start Capacitor (CSS) And STSEL Connection Table 6. Slow-Start Capacitor Values And Slow-Start Time CSS (nF) OPEN 3.3 4.7 10 15 22 33 SS Time (msec) 1.2 2.1 2.5 3.8 5.1 7.0 9.8 7.3.16 Overcurrent Protection For protection against load faults, the LMZ31710 incorporates output overcurrent protection. The overcurrent protection mode can be selected using the OCP_SEL pin. Leaving the OCP_SEL pin open selects hiccup mode and connecting it to AGND selects cycle-by-cycle mode. In hiccup mode, applying a load that exceeds the overcurrent threshold of the regulator causes the regulated output to shut down. Following shutdown, the module periodically attempts to recover by initiating a soft-start power-up as shown in Figure 30. This is described as a hiccup mode of operation, where the module continues in a cycle of successive shutdown and power-up until the load fault is removed. During this period, the average current flowing into the fault is significantly reduced, which reduces power dissipation. Once the fault is removed, the module automatically recovers and returns to normal operation as shown in Figure 31. In cycle-by-cycle mode, applying a load that exceeds the overcurrent threshold of the regulator limits the output current and reduces the output voltage as shown in Figure 32. During this period, the current flowing into the fault remains high, causing the power dissipation to stay high as well. Once the overcurrent condition is removed, the output voltage returns to the set-point voltage as shown in Figure 33. Figure 30. Overcurrent Limiting (Hiccup) Figure 31. Removal Of Overcurrent (Hiccup) Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 21 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com Figure 32. Overcurrent Limiting (Cycle-By-Cycle) Figure 33. Removal Of Overcurrent (Cycle-By-Cycle) 7.3.17 Synchronization (CLK) An internal phase locked loop (PLL) has been implemented to allow synchronization between 200 kHz and 1200 kHz, and to easily switch from RT mode to CLK mode. To implement the synchronization feature, connect a square wave clock signal to the RT/CLK pin with a duty cycle between 20% to 80%. The clock signal amplitude must transition lower than 0.5 V and higher than 2 V. The start of the switching cycle is synchronized to the falling edge of RT/CLK pin. In applications where both RT mode and CLK mode are needed, the device can be configured as shown in Figure 34. Before the external clock is present, the device works in RT mode and the switching frequency is set by RT resistor. When the external clock is present, the CLK mode overrides the RT mode. The first time the CLK pin is pulled above the RT/CLK high threshold (2 V), the device switches from RT mode to CLK mode and the RT/CLK pin becomes high impedance as the PLL starts to lock onto the frequency of the external clock. It is not recommended to switch from CLK mode back to RT mode because the internal switching frequency drops to 100 kHz first before returning to the switching frequency set by the RT resistor (RRT). External Clock 200 kHz to 1200 kHz RT/CLK RRT AGND Figure 34. RT/CLK Configuration The switching frequency must be selected based on the output voltages of the devices being synchronized. Table 7 shows the allowable frequencies for a given range of output voltages. The allowable switching frequency changes based on the maximum output current (IOUT) of an application. The table shows the VOUT range when IOUT 10 A, 9 A, and 8 A. For the most efficient solution, always synchronize to the lowest allowable frequency. For example, an application requires synchronizing three LMZ31710 devices with output voltages of 1.0 V, 1.2 V, and 1.8 V, all powered from PVIN = 12 V. Table 7 shows that all three output voltages must be synchronized to 300 kHz. 22 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 Table 7. Allowable Switching Frequency versus Output Voltage SWITCHING FREQUENCY (kHz) PVIN = 12 V PVIN = 5 V VOUT RANGE (V) VOUT RANGE (V) IOUT 10 A IOUT 9 A IOUT 8 A IOUT 10 A IOUT 9 A IOUT 8 A 200 0.6 - 1.2 0.6 - 1.6 0.6 - 2.0 0.6 - 1.5 0.6 - 2.5 0.6 - 4.3 300 0.8 - 1.9 0.8 - 2.6 0.8 - 3.5 0.6 - 4.3 0.6 - 4.3 0.6 - 4.3 400 1.0 - 2.7 1.0 - 4.0 1.0 - 5.5 0.6 - 4.3 0.6 - 4.3 0.6 - 4.3 500 1.3 - 3.8 1.3 - 5.5 1.3 - 5.5 0.6 - 4.2 0.6 - 4.2 0.6 - 4.3 600 1.5 - 5.5 1.5 - 5.5 1.5 - 5.5 0.8 - 4.1 0.8 - 4.2 0.7 - 4.2 700 1.8 - 5.5 1.8 - 5.5 1.8 - 5.5 0.9 - 4.0 0.9 - 4.1 0.8 - 4.1 800 2.0 - 5.5 2.0 - 5.5 2.0 - 5.5 1.0 - 3.9 1.0 - 4.0 1.0 - 4.0 900 2.2 - 5.5 2.2 - 5.5 2.2 - 5.5 1.2 - 3.8 1.1 - 3.9 1.1 - 3.9 1000 2.5 - 5.5 2.5 - 5.5 2.5 - 5.5 1.4 - 3.7 1.3 - 3.8 1.3 - 3.8 1100 2.7 - 5.5 2.7 - 5.5 2.7 - 5.5 1.4 - 3.6 1.4 - 3.7 1.4 - 3.7 1200 3.0 - 5.5 3.0 - 5.5 3.0 - 5.5 1.5 - 3.6 1.5 - 3.6 1.5 - 3.6 7.3.18 Sequencing (SS/TR) Many of the common power supply sequencing methods can be implemented using the SS/TR, INH, and PWRGD pins. The sequential method is illustrated in Figure 35 using two LMZ31710 devices. The PWRGD pin of the first device is coupled to the INH pin of the second device, which enables the second power supply once the primary supply reaches regulation. Figure 36 shows sequential turnon waveforms of two LMZ31710 devices. INH/UVLO VOUT1 VOUT STSEL PWRGD INH/UVLO VOUT2 VOUT STSEL PWRGD Figure 35. Sequencing Schematic Figure 36. Sequencing Waveforms Simultaneous power supply sequencing can be implemented by connecting the resistor network of R1 and R2 shown in Figure 37 to the output of the power supply that needs to be tracked or to another voltage reference source. The tracking voltage must exceed 750 mV before VOUT2 reaches its set-point voltage. The PWRGD output of the VOUT2 device can remain low if the tracking voltage does not exceed 1.4 V. Figure 38 shows simultaneous turnon waveforms of two LMZ31710 devices. Equation 3 and Equation 4 calculate the values of R1 and R2. (VOUT2 12.6 ) (kW ) 0.6 0.6 R1 R2 = (kW ) (VOUT2 - 0.6 ) R1 = (3) (4) Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 23 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com VOUT1 VOUT INH/UVLO STSEL SS/TR VOUT2 VOUT INH/UVLO R1 STSEL SS/TR R2 Figure 37. Simultaneous Tracking Schematic Figure 38. Simultaneous Tracking Waveforms 7.4 Device Functional Modes 7.4.1 Programmable Undervoltage Lockout (UVLO) The LMZ31710 implements internal UVLO circuitry on the VIN pin. The device is disabled when the VIN pin voltage falls below the internal VIN UVLO threshold. The internal VIN UVLO rising threshold is 4.5 V(max) with a typical hysteresis of 150 mV. If an application requires either a higher UVLO threshold on the VIN pin or a higher UVLO threshold for a combined VIN and PVIN, then the UVLO pin can be configured as shown in Figure 39 or Figure 40. Table 8 lists standard values for RUVLO1 and RUVLO2 to adjust the VIN UVLO voltage up. PVIN PVIN VIN VIN RUVLO1 RUVLO1 INH/UVLO INH/UVLO RUVLO2 RUVLO2 Figure 39. Adjustable VIN UVLO Figure 40. Adjustable VIN And Pvin Undervoltage Lockout Table 8. Standard Resistor Values For Adjusting VIN UVLO VIN UVLO (V) 24 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 RUVLO1 (k) 68.1 68.1 68.1 68.1 68.1 68.1 68.1 68.1 68.1 68.1 68.1 RUVLO2 (k) 21.5 18.7 16.9 15.4 14.0 13.0 12.1 11.3 10.5 9.76 9.31 Hysteresis (mV) 400 415 430 450 465 480 500 515 530 550 565 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 For a split rail application, if a secondary UVLO on PVIN is required, VIN must be 4.5 V. Figure 41 shows the PVIN UVLO configuration. Use Table 9 to select RUVLO1 and RUVLO2 for PVIN. If PVIN UVLO is set for less than 3.5 V, a 5.1-V zener diode must be added to clamp the voltage on the UVLO pin below 6 V. > 4.5 V VIN PVIN RUVLO1 INH/UVLO RUVLO2 Figure 41. Adjustable PVIN Undervoltage Lockout, (VIN 4.5 V) Table 9. Standard Resistor Values For Adjusting Pvin UVLO, (VIN 4.5 V) PVIN UVLO (V) 2.9 3.0 3.5 4.0 4.5 RUVLO1 (k) 68.1 68.1 68.1 68.1 68.1 RUVLO2 (k) 47.5 44.2 34.8 28.7 24.3 Hysteresis (mV) 330 335 350 365 385 For higher PVIN UVLO voltages, see Table 8 for resistor values Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 25 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 8 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI's customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality. 8.1 Application Information The LMZ31710 power module is an easy-to-use integrated power solution that combines a 10-A DC/DC converter with power MOSFETs, a shielded inductor, and passives into a low profile, QFN package. This total power solution allows as few as three external components and eliminates the loop compensation and magnetics part selection process. 8.2 Typical Application A typical LMZ31710 application requires input and output capacitors, a voltage setting resistor, and a switching frequency setting resistor. Figure 42 shows a typical LMZ31710 schematic with only the minimum required components. LMZ31710 VIN VIN / PVIN 4.5 V to 17 V PVIN VOUT 1.2 V SENSE+ VOUT + + CIN1 CIN2 100 F 47 F CIN3 0.1 F COUT1 2x 100 F ISHARE SYNC_OUT COUT2 220 F PWRGD INH/UVLO RT/CLK SS/TR VADJ RSET 1.43 k STSEL AGND PGND RRT 487 k Figure 42. Typical Schematic PVIN = VIN = 4.5 V To 17 V, VOUT = 1.2 V 8.2.1 Design Requirements For this design example, use the parameters listed in Table 10 and follow these design procedures: Table 10. Design Parameters 26 DESIGN PARAMETER EXAMPLE VALUE Input voltage 11.4 V to 12.6 V Output voltage 1.2 V Output current 10 A Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 8.2.2 Detailed Design Procedure 8.2.2.1 Custom Design With WEBENCH(R) Tools Click here to create a custom design using the LMZ31710 device with the WEBENCH(R) Power Designer. 1. Start by entering the input voltage (VIN), output voltage (VOUT), and output current (IOUT) requirements. 2. Optimize the design for key parameters such as efficiency, footprint, and cost using the optimizer dial. 3. Compare the generated design with other possible solutions from Texas Instruments. The WEBENCH Power Designer provides a customized schematic along with a list of materials with real-time pricing and component availability. In most cases, these actions are available: * Run electrical simulations to see important waveforms and circuit performance * Run thermal simulations to understand board thermal performance * Export customized schematic and layout into popular CAD formats * Print PDF reports for the design, and share the design with colleagues Get more information about WEBENCH tools at www.ti.com/WEBENCH. 8.2.2.2 Setting The Output Voltage The output voltage of the LMZ31710 is externally adjustable using a single resistor (RSET). Select the value of RSET from Table 2 or calculate using Equation 5. 1.43 RSET = VOUT (( 0.6 ) - 1 ) (k ) (5) To set the output voltage to 1.2 V, the calculated value for RSET is 1.43 k. 8.2.2.3 Setting the Switching Frequency The recommended switching frequency for 1.2-V output voltage is 300 kHz. To set the switching frequency to 300 kHz, a 487-k RRT resistor is required. Refer to Table 2 for recommended switching frequencies for other output voltages. 8.2.2.4 Input Capacitance The minimum required input capacitance for the LMZ31710 is 44 F of ceramic capacitance. However, adding a 0.1-F ceramic capacitor placed directly at the input pins of the device will help with high frequency bypassing. Additionally, adding a bulk input capacitor is helpful in applications with fast changing load current. In this application, a combination of a 100-F bulk capacitor, a 47-F ceramic capacitor, and a 0.1-F ceramic capacitor was used. 8.2.2.5 Output Capacitance The amount of required output capacitance depends on the output voltage setting, as shown in Table 3. For an output voltage of 1.2 V, the required minimum output capacitance is 200 F, with a requirement that at least 47 F must be ceramic type. In this application, a combination of a 200 F of ceramic capacitance and a 220-F bulk capacitor was used. The additional 220-F bulk capacitor will help in applications with fast changing load current. 8.3 Additional Application Schematics Figure 43 and Figure 44 show additional typical schematics. Figure 43 shows a typical schematic for a 3.3-V output while PVIN and VIN are tied to the same input voltage rail. Figure 44 shows a typical schematic for a 1.0 V output, however PVIN and VIN are powered from separate input voltage rails. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 27 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com Additional Application Schematics (continued) LMZ31710 VIN VIN / PVIN 4.5 V to 17 V PVIN VOUT 3.3 V SENSE+ VOUT + + CIN1 CIN2 100 F 47 F CIN3 0.1 F COUT1 100 F ISHARE SYNC_OUT COUT2 220 F PWRGD INH/UVLO RT/CLK SS/TR VADJ STSEL AGND PGND RSET 316 RRT 90.9 k Figure 43. Typical Schematic PVIN = VIN = 4.5 V To 17 V, Vout = 3.3 V VIN 4.5 V to 17 V CIN3 4.7 F VIN LMZ31710 VOUT 1.0 V SENSE+ PVIN 3.3 V PVIN VOUT + + CIN1 CIN2 100 F 47 F CIN3 0.1 F ISHARE SYNC_OUT COUT1 3x 100 F COUT2 220 F PWRGD INH/UVLO RT/CLK SS/TR VADJ STSEL AGND PGND RSET 2.15 k RRT 1M Figure 44. Typical Schematic PVIN = 3.3 V, VIN = 4.5 V To 17 V, Vout = 1.0 V 9 Power Supply Recommendations The LMZ31710 is designed to operate from an input voltage supply range between 2.95 V and 17 V. This input supply must be well-regulated and able to withstand maximum input current and maintain a stable voltage. The resistance of the input supply rail must be low enough that an input current transient does not cause a high enough drop at the supply voltage that can cause a false UVLO fault triggering and system reset. If the input supply is located more than a few inches from the LMZ31710, additional bulk capacitance can be required at the input pins. A typical recommended amount of bulk input capacitance is 47 F - 100 F. 28 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 10 Layout 10.1 Layout Considerations To achieve optimal electrical and thermal performance, an optimized PCB layout is required. Figure 45 through Figure 48 shows a typical PCB layout. Some considerations for an optimized layout are: * Use large copper areas for power planes (PVIN, VOUT, and PGND) to minimize conduction loss and thermal stress. * Place ceramic input and output capacitors close to the device pins to minimize high frequency noise. * Locate additional output capacitors between the ceramic capacitor and the load. * Keep AGND and PGND separate from one another. * Place RSET, RRT, and CSS as close as possible to their respective pins. * Use multiple vias to connect the power planes to internal layers. 10.2 Layout Examples Figure 45. Typical Top-Layer Layout Figure 46. Typical Layer-2 Layout Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 29 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com Layout Examples (continued) Figure 48. Typical Bottom-Layer Layout Figure 47. Typical Layer 3 Layout 10.2.1 EMI The LMZ31710 is compliant with EN55022 Class B radiated emissions. Figure 49 and Figure 50 show typical examples of radiated emissions plots for the LMZ31710 operating from 5 V and 12 V, respectively. Both graphs include the plots of the antenna in the horizontal and vertical positions. Figure 49. Radiated Emissions 5-V Input, 1.8-V Output, 10A Load (En55022 Class B) 30 Figure 50. Radiated Emissions 12-V Input, 1.8-V Output, 10-A Load (EN55022 Class B) Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 11 Device and Documentation Support 11.1 Device Support 11.1.1 Development Support 11.1.1.1 Custom Design With WEBENCH(R) Tools Click here to create a custom design using the LMZ31710 device with the WEBENCH(R) Power Designer. 1. Start by entering the input voltage (VIN), output voltage (VOUT), and output current (IOUT) requirements. 2. Optimize the design for key parameters such as efficiency, footprint, and cost using the optimizer dial. 3. Compare the generated design with other possible solutions from Texas Instruments. The WEBENCH Power Designer provides a customized schematic along with a list of materials with real-time pricing and component availability. In most cases, these actions are available: * Run electrical simulations to see important waveforms and circuit performance * Run thermal simulations to understand board thermal performance * Export customized schematic and layout into popular CAD formats * Print PDF reports for the design, and share the design with colleagues Get more information about WEBENCH tools at www.ti.com/WEBENCH. 11.1.2 Third-Party Products Disclaimer TI'S PUBLICATION OF INFORMATION REGARDING THIRD-PARTY PRODUCTS OR SERVICES DOES NOT CONSTITUTE AN ENDORSEMENT REGARDING THE SUITABILITY OF SUCH PRODUCTS OR SERVICES OR A WARRANTY, REPRESENTATION OR ENDORSEMENT OF SUCH PRODUCTS OR SERVICES, EITHER ALONE OR IN COMBINATION WITH ANY TI PRODUCT OR SERVICE. 11.2 Documentation Support 11.2.1 Related Documentation For related documentation see the following: * Texas Instruments, LMZ31710 EVM User's Guide * Texas Instruments, LMZ31710 Parallel EVM User's Guide * Texas Instruments, LMZ31707 (7A) Datasheet * Texas Instruments, LMZ31704 (4A) Datasheet * Texas Instruments, Soldering Requirements for BQFN Packages 11.3 Receiving Notification of Documentation Updates To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper right corner, click on Alert me to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document. 11.4 Support Resources TI E2ETM support forums are an engineer's go-to source for fast, verified answers and design help -- straight from the experts. Search existing answers or ask your own question to get the quick design help you need. Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. 11.5 Trademarks Eco-Mode, E2E are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 31 LMZ31710 SNVS987F - JULY 2013 - REVISED MAY 2020 www.ti.com 11.6 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 11.7 Glossary SLYZ022 -- TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 12 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 12.1 Tape and Reel Information REEL DIMENSIONS TAPE DIMENSIONS K0 P1 B0 W Reel Diameter Cavity A0 B0 K0 W P1 A0 Dimension designed to accommodate the component width Dimension designed to accommodate the component length Dimension designed to accommodate the component thickness Overall width of the carrier tape Pitch between successive cavity centers Reel Width (W1) QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Sprocket Holes Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 User Direction of Feed Pocket Quadrants 32 Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W (mm) Pin1 Quadrant LMZ31710RVQR B3QFN RVQ 42 500 330.0 24.4 10.35 10.35 4.6 16.0 24.0 Q2 LMZ31710RVQT B3QFN RVQ 42 250 330.0 24.4 10.35 10.35 4.6 16.0 24.0 Q2 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 LMZ31710 www.ti.com SNVS987F - JULY 2013 - REVISED MAY 2020 TAPE AND REEL BOX DIMENSIONS Width (mm) W L H Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMZ31710RVQR B3QFN RVQ 42 500 383.0 353.0 58.0 LMZ31710RVQT B3QFN RVQ 42 250 383.0 353.0 58.0 Submit Documentation Feedback Copyright (c) 2013-2020, Texas Instruments Incorporated Product Folder Links: LMZ31710 33 PACKAGE OPTION ADDENDUM www.ti.com 28-Jun-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (C) (3) Device Marking (4/5) (6) LMZ31710RVQR ACTIVE B3QFN RVQ 42 500 RoHS Exempt & Green NIPDAU Level-3-245C-168 HR -40 to 85 (54020, LMZ31710) LMZ31710RVQT ACTIVE B3QFN RVQ 42 250 RoHS Exempt & Green NIPDAU Level-3-245C-168 HR -40 to 85 (54020, LMZ31710) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 28-Jun-2020 Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 10-Mar-2021 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMZ31710RVQR B3QFN RVQ 42 500 330.0 24.4 10.35 10.35 4.6 16.0 24.0 Q2 LMZ31710RVQT B3QFN RVQ 42 250 330.0 24.4 10.35 10.35 4.6 16.0 24.0 Q2 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 10-Mar-2021 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMZ31710RVQR B3QFN RVQ 42 500 383.0 353.0 58.0 LMZ31710RVQT B3QFN RVQ 42 250 383.0 353.0 58.0 Pack Materials-Page 2 IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (https:www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2021, Texas Instruments Incorporated