© Semiconductor Components Industries, LLC, 2012
May, 2012 − Rev. 7
1Publication Order Number:
NTD4808N/D
NTD4808N, NVD4808N
Power MOSFET
30 V, 63 A, Single N−Channel, DPAK/IPAK
Features
•Low RDS(on) to Minimize Conduction Losses
•Low Capacitance to Minimize Driver Losses
•Optimized Gate Charge to Minimize Switching Losses
•NVD Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
•These are Pb−Free Devices
Applications
•CPU Power Delivery
•DC−DC Converters
•Low Side Switching
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Parameter Symbol Value Unit
Drain−to−Source Voltage VDSS 30 V
Gate−to−Source Voltage VGS ±20 V
Continuous Drain
Current RqJA
(Note 1)
Steady
State
TA = 25°CID13.8 A
TA = 85°C 10.7
Power Dissipation
RqJA (Note 1)
TA = 25°C PD2.63 W
Continuous Drain
Current RqJA
(Note 2)
TA = 25°CID 10 A
TA = 85°C 7.8
Power Dissipation
RqJA (Note 2)
TA = 25°C PD1.4 W
Continuous Drain
Current RqJC
(Note 1)
TC = 25°CID63 A
TC = 85°C 49
Power Dissipation
RqJC (Note 1)
TC = 25°C PD54.6 W
Pulsed Drain
Current
tp=10msTA = 25°C IDM 126 A
Current Limited by Package TA = 25°C IDmaxPkg 45 A
Operating Junction and Storage
Temperature
TJ,
TSTG
−55 to
+175
°C
Source Current (Body Diode) IS45 A
Drain to Source dV/dt dV/dt 6 V/ns
Single Pulse Drain−to−Source Avalanche
Energy (VDD = 24 V, VGS = 10 V,
IL = 17 Apk, L = 1.0 mH, RG = 25 W)
EAS 144.5 mJ
Lead Temperature for Soldering Purposes
(1/8” from case for 10 s)
TL260 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
MARKING DIAGRAMS
& PIN ASSIGNMENTS
http://onsemi.com
V(BR)DSS RDS(ON) MAX ID MAX
30 V
8.0 mW @ 10 V
63 A
12.4 mW @ 4.5 V
G
S
N−CHANNEL MOSFET
D
DPAK
CASE 369AA
STYLE 2
IPAK
CASE 369D
STYLE 2
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
ORDERING INFORMATION
1
Gate
2
Drain 3
Source
4
Drain
4
Drain
2
Drain
1
Gate 3
Source
YWW
48
08NG
Y = Year
WW = Work Week
4808N = Device Code
G = Pb−Free Package
123
4
YWW
48
08NG
12
3
4
NTD4808N, NVD4808N
http://onsemi.com
2
THERMAL RESISTANCE MAXIMUM RATINGS
Parameter Symbol Value Unit
Junction−to−Case (Drain) RqJC 2.75
°C/W
Junction−to−TAB (Drain) RqJC−TAB 3.5
Junction−to−Ambient – Steady State (Note 1) RqJA 57
Junction−to−Ambient – Steady State (Note 2) RqJA 107
1. Surface−mounted on FR4 board using 1 sq−in pad, 1 oz Cu.
2. Surface−mounted on FR4 board using the minimum recommended pad size.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Symbol Test Condition Min Typ Max Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA30 V
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
27 mV/°C
Zero Gate Voltage Drain Current IDSS VGS = 0 V,
VDS = 24 V
TJ = 25 °C 1
mA
TJ = 125°C 10
Gate−to−Source Leakage Current IGSS VDS = 0 V, VGS = ±20 V ±100 nA
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250 mA1.5 2.5 V
Negative Threshold Temperature
Coefficient
VGS(TH)/TJ5.6 mV/°C
Drain−to−Source On Resistance RDS(on) VGS = 10 to 11.5 V ID = 30 A 6.7 8.0
mW
ID = 15 A 6.6
VGS = 4.5 V ID = 30 A 10.3 12.4
ID = 15 A 9.8
Forward Transconductance gFS VDS = 15 V, ID = 15 A 11.4 S
CHARGES AND CAPACITANCES
Input Capacitance CISS
VGS = 0 V, f = 1 MHz, VDS = 12 V
1538
pF
Output Capacitance COSS 334
Reverse Transfer Capacitance CRSS 180
Total Gate Charge QG(TOT)
VGS = 4.5 V, VDS = 15 V; ID = 30 A
11.3 13
nC
Threshold Gate Charge QG(TH) 1.6
Gate−to−Source Charge QGS 4.9
Gate−to−Drain Charge QGD 4.9
Total Gate Charge QG(TOT) VGS = 11.5 V, VDS = 15 V;
ID = 30 A
26 nC
SWITCHING CHARACTERISTICS (Note 4)
Turn−On Delay Time td(ON)
VGS = 4.5 V, VDS = 15 V, ID = 15 A,
RG = 3.0 W
12.3
ns
Rise Time tr21.3
Turn−Off Delay Time td(OFF) 14.6
Fall Time tf6.0
3. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
4. Switching characteristics are independent of operating junction temperatures.
NTD4808N, NVD4808N
http://onsemi.com
3
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter UnitMaxTypMinTest ConditionSymbol
SWITCHING CHARACTERISTICS (Note 4)
Turn−On Delay Time td(ON)
VGS = 11.5 V, VDS = 15 V,
ID = 15 A, RG = 3.0 W
7.7
ns
Rise Time tr19.5
Turn−Off Delay Time td(OFF) 23
Fall Time tf3.5
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage VSD VGS = 0 V,
IS = 30 A
TJ = 25°C 0.93 1.2
V
TJ = 125°C 0.83
Reverse Recovery Time tRR
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 30 A
20
ns
Charge Time ta10.4
Discharge Time tb9.6
Reverse Recovery Charge QRR 9.7 nC
PACKAGE PARASITIC VALUES
Source Inductance LS
TA = 25°C
2.49 nH
Drain Inductance, DPAK LD0.0164
Drain Inductance, IPAK LD1.88
Gate Inductance LG3.46
Gate Resistance RG1.1 W
3. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
4. Switching characteristics are independent of operating junction temperatures.
NTD4808N, NVD4808N
http://onsemi.com
4
TYPICAL PERFORMANCE CURVES
4 V
5.5 V to 10 V
10
0.020
30
0.002
060
1.5
1.2
0.9
0.6
1000
10000
05
30
21
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
ID, DRAIN CURRENT (AMPS)
0
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics
ID, DRAIN CURRENT (AMPS)
5.5
10
6.5
7.6
6.8
6.05
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
ID, DRAIN CURRENT (AMPS)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
Figure 5. On−Resistance Variation with
Temperature
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Drain−to−Source Leakage Current
vs. Drain Voltage
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
RDS(on), DRAIN−TO−SOURCE RESISTANCE
(NORMALIZED)
IDSS, LEAKAGE (nA)
−50 50250−25 75 125100
23
1510 305
3
VDS ≥ 10 V
TJ = 25°C
TJ = −55°C
TJ = 125°C
VGS = 4.5 V
175
VGS = 0 V
ID = 30 A
VGS = 10 V
50
TJ = 150°C
TJ = 125°C
40
0
80
45
TJ = 25°C
20
10
3.2 V
1.8
100
4
90
1
610
8.4
40
0.010
50
3 V
4.5 V
3.4 V
3.6 V
3.8 V
100
40
10
20
60
80
70
30
70
20
60
10
50
ID = 30 A
TJ = 25°C
789
6.4
7.2
8.0
9.2
8.8
25 35 45 55
VGS = 11.5 V
150
0.1
TJ = 25°C
9.6
7.5 8.5 9.5 10.5 11 11.5
0.004
0.006
0.008
0.018
0.016
0.014
0.012
2015
1.4
1.1
0.8
1.7
1.3
1.0
0.7
1.6
25
1TJ = 25°C
NTD4808N, NVD4808N
http://onsemi.com
5
TYPICAL PERFORMANCE CURVES
Crss
0101525
GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (VOLTS)
C, CAPACITANCE (pF)
Figure 7. Capacitance Variation
500
0
1000
5
TJ = 25°C
Coss
Ciss
1500
2000
Figure 8. Gate−To−Source and Drain−To−Source
Voltage vs. Total Charge
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
0
1
0
QG, TOTAL GATE CHARGE (nC)
5
2
101
VDD = 15 V
VGS = 4.5 V
ID = 30 A
TJ = 25°C
Q2
Q1
QT
1211
0
0.5
VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS)
IS, SOURCE CURRENT (AMPS)
Figure 9. Resistive Switching Time
Variation vs. Gate Resistance
RG, GATE RESISTANCE (OHMS)
1 10 100
1
t, TIME (ns)
VGS = 0 V
Figure 10. Diode Forward Voltage vs. Current
100
0.6 0.7 1.0
5
10
15
tr
td(off)
td(on)
tf
10
VDD = 15 V
ID = 30 A
VGS = 11.5 V
0.8 0.9
20
30
25 TJ = 25°C
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
0.1 1 100
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
1000
ID, DRAIN CURRENT (AMPS)
RDS(on) LIMIT
THERMAL LIMIT
PACKAGE LIMIT
10
10
VGS = 20 V
SINGLE PULSE
TC = 25°C
1 ms
100 ms
10 ms
dc
10 ms
20
3
1
100
0
TJ, JUNCTION TEMPERATURE (°C)
ID = 17 A
Figure 12. Maximum Avalanche Energy vs.
Starting Junction Temperature
50 75 175
20
40
60
100 125
80
100
EAS, SINGLE PULSE DRAIN−TO−SOURCE
AVALANCHE ENERGY (mJ)
150
4
23456789
10
30
50
70
90
NTD4808N, NVD4808N
http://onsemi.com
6
TYPICAL PERFORMANCE CURVES
Figure 13. Avalanche Characteristics
10001 100
PULSE WIDTH (ms)
ID, DRAIN CURRENT (AMPS)
10
10
125°C
1
100
100°C
25°C
Figure 14. Thermal Response
r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE
(NORMALIZED)
t, TIME (ms)
0.1
1.0
0.01
0.1
0.2
0.02
D = 0.5
0.05
0.01
SINGLE PULSE
RqJC(t) = r(t) RqJC
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT t1
TJ(pk) − TC = P(pk) RqJC(t)
P(pk)
t1
t2
DUTY CYCLE, D = t1/t2
1.0E+00 1.0E+011.0E-011.0E-021.0E-031.0E-041.0E-05
ORDERING INFORMATION
Device Package Shipping†
NTD4808NT4G DPAK
(Pb−Free)
2500 / Tape & Reel
NTD4808N−1G IPAK
(Pb−Free)
75 Units / Rail
NVD4808NT4G DPAK
(Pb−Free)
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
NTD4808N, NVD4808N
http://onsemi.com
7
PACKAGE DIMENSIONS
DPAK (SINGLE GUAGE)
CASE 369AA−01
ISSUE B
b
D
E
b3
L3
L4
b2
eM
0.005 (0.13) C
c2
A
c
C
Z
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
D0.235 0.245 5.97 6.22
E0.250 0.265 6.35 6.73
A0.086 0.094 2.18 2.38
b0.025 0.035 0.63 0.89
c2 0.018 0.024 0.46 0.61
b2 0.030 0.045 0.76 1.14
c0.018 0.024 0.46 0.61
e0.090 BSC 2.29 BSC
b3 0.180 0.215 4.57 5.46
L4 −−− 0.040 −−− 1.01
L0.055 0.070 1.40 1.78
L3 0.035 0.050 0.89 1.27
Z0.155 −−− 3.93 −−−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI-
MENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
12 3
4
H0.370 0.410 9.40 10.41
A1 0.000 0.005 0.00 0.13
L1 0.108 REF 2.74 REF
L2 0.020 BSC 0.51 BSC
A1
H
DETAIL A
SEATING
PLANE
A
B
C
L1
L
H
L2 GAUGE
PLANE
DETAIL A
ROTATED 90 CW5
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
5.80
0.228
2.58
0.102
1.60
0.063
6.20
0.244
3.00
0.118
6.17
0.243
ǒmm
inchesǓ
SCALE 3:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
NTD4808N, NVD4808N
http://onsemi.com
8
PACKAGE DIMENSIONS
IPAK
CASE 369D−01
ISSUE C
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
123
4
V
SA
K
−T−
SEATING
PLANE
R
B
F
G
D3 PL
M
0.13 (0.005) T
C
E
J
H
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.235 0.245 5.97 6.35
B0.250 0.265 6.35 6.73
C0.086 0.094 2.19 2.38
D0.027 0.035 0.69 0.88
E0.018 0.023 0.46 0.58
F0.037 0.045 0.94 1.14
G0.090 BSC 2.29 BSC
H0.034 0.040 0.87 1.01
J0.018 0.023 0.46 0.58
K0.350 0.380 8.89 9.65
R0.180 0.215 4.45 5.45
S0.025 0.040 0.63 1.01
V0.035 0.050 0.89 1.27
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
Z
Z0.155 −−− 3.93 −−−
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
NTD4808N/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
