Surface Mount Zener Diode Features: * * * * Planar Die Construction 500mW Power Dissipation On Ceramic PCB General Purpose, Medium Current Ideally Suited For Automated Assembly Processes Applications: Zener diode Ultra-small surface mount package Max. Rating @ Ta = 25C unless otherwise specified Parameter Symbol Limits Unit Forward voltage @ If = 10mA Vf 0.9 V Power dissipation Pd 500 mW RJA 305 C/W Tj 150 C Tstg -65 to +150 C Thermal resistance junction to ambient air Operating junction temperature range Storage temperature range Note : Device mounted on ceramic PCB; 7.6mm x 9.4mm x 0.87mm with pad areas 25mm2 Short duration test pulse used to minimize self-heating effect. When provided, otherwise, parts are provided with date code only, and type number identifications appears on reel only. f = 1kHz Electrical Characteristics @ Ta = 25C unless otherwise specified Max. Zener Impedance Zener Voltage Range Marking Code WF Vz @ Izt Izt Nom(V) Min(V) Max(V) mA 10 9.4 10.6 5 Zzt@Izt Zzk@Izk 20 150 Max. Reverse Current Typical Temperature Coefficient@ Iztc mV/C Test Current Iztc Izk Ir @Vr mA A V Min. Max. mA 1 0.2 7 4.5 8 5 www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Surface Mount Zener Diode Typical Characteristics @ Ta = 25C unless otherwise specified www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Surface Mount Zener Diode Plastic surface mounted package Soldering Footprint Package Information Device Package Shipping BZT52C10-7-F SOD-123 3,000 / Tape & Reel Part Number Table Description Part Number Surface mount zener diode BZT52C10-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0