IL300
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Mar-18 1Document Number: 83622
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Linear Optocoupler, High Gain Stability, Wide Bandwidth
DESCRIPTION
The IL300 linear optocoupler consists of an AlGaAs IRLED
irradiating an isolated feedback and an output PIN
photodiode in a bifurcated arrangement. The feedback
photodiode captures a percentage of the LEDs flux and
generates a control signal (IP1) that can be used to servo the
LED drive current. This technique compensates for the
LED’s non-linear, time, and temperature characteristics.
The output PIN photodiode produces an output signal (IP2)
that is linearly related to the servo optical flux created by the
LED.
The time and temperature stability of the input-output
coupler gain (K3) is insured by using matched PIN
photodiodes that accurately track the output flux of the LED.
FEATURES
Couples AC and DC signals
0.01 % servo linearity
Wide bandwidth, > 200 kHz
High gain stability, ± 0.005 %/°C typically
Low input-output capacitance
Low power consumption, < 15 mW
Isolation rated voltage 4420 VRMS
Internal insulation distance, > 0.4 mm
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Power supply feedback voltage / current
Medical sensor isolation
Audio signal interfacing
Isolated process control transducers
Digital telephone isolation
AGENCY APPROVALS
•UL
•cUL
DIN EN 60747-5-5 (VDE 0884-5) available with option 1
•BSI
•FIMKO
•CQC
Note
(1) Also available in tubes, do not put “T” on the end
A
CNC
NC
C
AA
C
1
2
3
4
8
7
6
5
K2
K1
i179026_2
V
DE
ORDERING INFORMATION
I L300-DEFG-X0##T
PART NUMBER K3 BIN PACKAGE OPTION TAPE
AND
REEL
AGENCY
CERTIFIED /
PACKAGE
K3 BIN
UL, cUL,
BSI, FIMKO 0.557 to 1.618 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061
DIP-8 IL300 IL300-DEFG - - IL300-EF - IL300-E IL300-F
DIP-8, 400 mil,
option 6 IL300-X006 IL300-DEFG-X006 - - IL300-EF-X006 IL300-FG-X006 IL300-E-X006 IL300-F-X006
SMD-8, option 7 IL300-X007T
(1)
IL300-DEFG-X007T
(1)
IL300-EFG-X007 IL300-DE-X007T IL300-EF-X007T
(1)
IL300-FG-X007T IL300-E-X007T IL300-F-X007T
(1)
SMD-8, option 9 IL300-X009T
(1)
IL300-DEFG-X009T
(1)
- - IL300-EF-X009T
(1)
- - IL300-F-X009T
(1)
VDE, UL
,
BSI, FIMKO
0.557 to 1.618 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061
DIP-8 IL300-X001 IL300-DEFG-X001 - - IL300-EF-X001 - IL300-E-X001 IL300-F-X001
DIP-8, 400 mil,
option 6 IL300-X016 IL300-DEFG-X016 IL300-EFG-X016 - IL300-EF-X016 - - IL300-F-X016
SMD-8, option 7 IL300-X017 IL300-DEFG-X017T
(1)
- - IL300-EF-X017T
(1)
- IL300-E-X017T IL300-F-X017T
(1)
SMD-8, option 9 - - - - - - IL300-E-X009T IL300-F-X019T
(1)
> 0.1 mm
10.16 mm
> 0.7 mm
7.62 mm
DIP-8
Option 7
Option 6
Option 9
IL300
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Mar-18 2Document Number: 83622
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Power dissipation Pdiss 160 mW
Derate linearly from 25 °C 2.13 mW/°C
Forward current IF60 mA
Surge current (pulse width < 10 μs) IPK 250 mA
Reverse voltage VR5V
Thermal resistance Rth 470 K/W
Junction temperature Tj100 °C
OUTPUT
Power dissipation Pdiss 50 mW
Derate linearly from 25 °C 0.65 mW/°C
Reverse voltage VR50 V
Thermal resistance Rth 1500 K/W
Junction temperature Tj100 °C
COUPLER
Total package dissipation at 25 °C Ptot 210 mW
Derate linearly from 25 °C 2.8 mW/°C
Storage temperature Tstg -55 to +150 °C
Operating temperature Tamb -55 to +100 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT (LED EMITTER)
Forward voltage IF = 10 mA VF- 1.25 1.50 V
VF temperature coefficient ΔVF/Δ°C - -2.2 - mV/°C
Reverse current VR = 5 V IR-1-μA
Junction capacitance VF = 0 V, f = 1 MHz Cj-15-pF
Dynamic resistance IF = 10 mA ΔVF/ΔIF-6-Ω
OUTPUT
Dark current Vdet = -15 V, IF = 0 A ID- 1 25 nA
Open circuit voltage IF = 10 mA VD- 500 - mV
Short circuit current IF = 10 mA ISC - 120 - μA
Junction capacitance VF = 0 V, f = 1 MHz Cj-12-pF
Noise equivalent power Vdet = 15 V NEP - 4 x 10-14 -W/Hz
COUPLER
Input-output capacitance VF = 0 V, f = 1 MHz - 1 - pF
K1, servo gain (IP1/IF)I
F = 10 mA, Vdet = -15 V K1 0.006 0.012 0.017
Servo photocurrent (1)(2) IF = 10 mA, Vdet = -15 V IP1 - 120 - μA
K2, forward gain (IP2/IF)I
F = 10 mA, Vdet = -15 V K2 0.006 0.012 0.017
Forward current IF = 10 mA, Vdet = -15 V IP2 - 120 - μA
K3, transfer gain (K2/K1) (1)(2) IF = 10 mA, Vdet = -15 V K3 0.56 1 1.65 K2/K1
Transfer gain stability IF = 10 mA, Vdet = -15 V ΔK3/ΔTA- ± 0.005 ± 0.15 %/°C
Transfer gain linearity IF = 1 mA to 10 mA ΔK3 - ± 0.25 - %
IF = 1 mA to 10 mA, Tamb = 0 °C to 75 °C - ± 0.5 - %
IL300
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Mar-18 3Document Number: 83622
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements
(1) Bin sorting: K3 (transfer gain) is sorted into bins that are ± 6 %, as follows:
Bin A = 0.557 to 0.626
Bin B = 0.620 to 0.696
Bin C = 0.690 to 0.773
Bin D = 0.765 to 0.859
Bin E = 0.851 to 0.955
Bin F = 0.945 to 1.061
Bin G = 1.051 to 1.181
Bin H = 1.169 to 1.311
Bin I = 1.297 to 1.456
Bin J = 1.442 to 1.618
K3 = K2/K1. K3 is tested at IF = 10 mA, Vdet = -15 V
(2) Bin categories: All IL300s are sorted into a K3 bin, indicated by an alpha character that is marked on the part. The bins range from “A”
through “J”.
The IL300 is shipped in tubes of 50 each. Each tube contains only one category of K3. The category of the parts in the tube is marked on
the tube label as well as on each individual part
(3) Category options: standard IL300 orders will be shipped from the categories that are available at the time of the order. Any of the ten
categories may be shipped. For customers requiring a narrower selection of bins, the bins can be grouped together as follows:
IL300-DEFG: order this part number to receive categories D, E, F, G only
IL300-EF: order this part number to receive categories E, F only
IL300-E: order this part number to receive category E only
Note
As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits
PHOTOCONDUCTIVE OPERATION
Frequency response IFq = 10 mA, MOD = ± 4 mA, RL = 50 ΩBW (-3 db) - 200 - kHz
Phase response at 200 kHz Vdet = -15 V - -45 - Deg.
SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Switching time ΔIF = 2 mA, IFq = 10 mA tr-1-μs
tf-1-μs
Rise time tr-1.75- μs
Fall time tf-1.75- μs
COMMON MODE TRANSIENT IMMUNITY
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Common mode capacitance VF = 0 V, f = 1 MHz CCM -0.5-pF
Common mode rejection ratio f = 60 Hz, RL = 2.2 kΩCMRR - 130 - dB
SAFETY AND INSULATION RATINGS
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification According to IEC 68 part 1 55 / 100 / 21
Comparative tracking index CTI 175
Maximum rated withstanding isolation voltage t = 1 min VISO 4420 VRMS
Maximum transient isolation voltage VIOTM 10 000 Vpeak
Maximum repetitive peak isolation voltage VIORM 890 Vpeak
Isolation resistance VIO = 500 V, Tamb = 25 °C RIO 1012 Ω
VIO = 500 V, Tamb = 100 °C RIO 1011 Ω
Output safety power PSO 400 mW
Input safety current ISI 275 mA
Safety temperature TS175 °C
Creepage distance 7mm
Clearance distance 7mm
Insulation thickness DTI 0.4 mm
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
IL300
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Mar-18 4Document Number: 83622
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Current vs. Forward Voltage
Fig. 2 - Servo Photocurrent vs. Forward Current
Fig. 3 - Normalized Photodiode Current vs. Forward Current
Fig. 4 - Servo Gain vs. Forward Current
Fig. 5 - Normalized Transfer Gain vs. Forward Current
Fig. 6 - Voltage Gain vs. Frequency
(2 mA)
10
100
1000
10000
0.1
1
10
100
1.01.21.41.6
Axis Title
1st line
2nd line
2nd line
IF- Forward Current (mA)
VF- Forward Voltage (V)
T
amb
= 25 °C
10
100
1000
10000
0
100
200
300
400
500
0 5 10 15 20 25
Axis Title
1st line
2nd line
2nd line
IP1 - Servo Photocurrent (µA)
IF- Forward Current (mA)
Tamb = 25 °C
Tamb = 0 °C
Tamb = 85 °C
Tamb = 100 °C
Tamb =-55 °C
10
100
1000
10000
0
1
2
3
4
5
6
7
8
0 1020304050
Axis Title
1st line
2nd line
2nd line
NIP1- Normalized Photodiode Current
IF- Forward Current (mA)
Normalized to:
I
F
= 10 mA,
V
D
= -15 V,
T
amb
= 25 °C
T
amb
= 25 °C
T
amb
= 100 °C
T
amb
= 85 °C
T
amb
= -55 °C
T
amb
= 0 °C
10
100
1000
10000
0
0.005
0.010
0.015
0.020
0.025
0 1020304050
Axis Title
1st line
2nd line
2nd line
K1 - Servo Gain (IP1/IF)
IF- Forward Current (mA)
Tamb = 25 °C
Tamb = 0 °C
Tamb = 85 °C
Tamb = 100 °C
Tamb =-55 °C
10
100
1000
10000
0.96
0.97
0.98
0.99
1.00
1.01
1.02
1.03
1.04
0 1020304050
Axis Title
1st line
2nd line
2nd line
NK3 - Normalized Transfer Gain (K1/K2)
IF- Forward Current (mA)
Normalized to:
IF= 10 mA, Tamb = 25 °C
Tamb = 100 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = -55 °C
Tamb = 85 °C
10
100
1000
10000
-4
-3
-2
-1
0
1
2
0.01 0.1 1 10 100 1000
Axis Title
1st line
2nd line
2nd line
Voltage Gain (dB)
f - Frequency (kHz)
IF= 10 mA,
IF(MOD) =±2 mA
RL= 1 kΩ
RL= 10 kΩ
IL300
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Mar-18 5Document Number: 83622
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Voltage Gain vs. Frequency
Fig. 8 - Phase Angle vs. Frequency
Fig. 9 - Common-Mode Rejection Ratio vs. Frequency
Fig. 10 - Photodiode Junction Capacitance vs. Reverse Voltage
10
100
1000
10000
-4
-3
-2
-1
0
1
2
0.01 0.1 1 10 100 1000
Axis Title
1st line
2nd line
2nd line
Voltage Gain (dB)
f - Frequency (kHz)
IF= 10 mA
IFmod =±4 mA
RL= 50 Ω
10
100
1000
10000
-10
-8
-6
-4
-2
0
2
0.01 0.1 1 10 100 1000
Axis Title
1st line
2nd line
2nd line
Phase Angle (°)
f - Frequency (kHz)
IF= 10 mA
IFmod =±4 mA
RL= 50 Ω
10
100
1000
10000
-120
-100
-80
-60
-40
-20
0
0.1 1 10 100 1000
Axis Title
1st line
2nd line
2nd line
Common Mode Rejection Ratio (dB)
f - Frequency (kHz)
10
100
1000
10000
0
2
4
6
8
10
12
14
0246810
Axis Title
1st line
2nd line
2nd line
Cj- Photodiode Junction Capacitance (pF)
VR- Reverse Voltage (V)
f = 1 MHz
IL300
www.vishay.com Vishay Semiconductors
Rev. 2.0, 05-Mar-18 6Document Number: 83622
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS (in millimeters)
PACKAGE MARKING (example of IL300-E-X001)
8 min.
0.51
1.02
7.62 ref.
9.53
10.03
0.25 typ.
0.102
0.249
15° max.
Option 9
0.35
0.25
10.16
10.92
7.8
7.4
10.36
9.96
Option 6
8 min.
7.62 typ.
4.6
4.1
8.4 min.
10.3 max.
0.7
Option 7
18450
i178010
ISO method A
Pin one ID
3
4
10°
1
2
9
6
5
8
7
0.527
0.889
3.302
3.810
0.46
0.58
7.112
8.382
1.016
1.270
9.652
10.16
0.203
0.305
2.794
3.302
6.096
6.604
0.508 ref. 0.254 ref.
0.254 ref.
2.540
1.270
7.62 typ.
IL300-E
V YWW 68
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED