AirBorn, Inc. • 4321 AirBorn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-2
Specifications
Materials and Finish
Series W and Series M55302
Pin Contacts: PC, PD, PF, PR, PW Copper Alloy per MIL-C-55302
Socket Contacts: SAC, SAD, SAF, SAR, SAW
Contact: (clipped) Be Cu Per MIL-C-55302
Ter minal: Copper Alloy per MIL-C-55302
Socket Contacts: S, SA
Contact: (Crimp, Removable)
Ter minal: Copper Alloy per MIL-C-55302
Contact Finish: Gold plate per MIL-G-45204 Gold plate per MIL-G-45204
Localized finish per Localized finish per
MIL-C-55302 MIL-C-55302
Molded Inser ts Glass filled polyphenylene sulfide per MIL-M-24519, Type GST-40F*
Jackscrews, Stainless steel, per ASTM-A582, passivated per QQ-P-35
Jacksockets,
Jackscrew Knobs,
Guide Pins,
Guide Sockets
Guide Sockets, Be Cu per ASTM-B196, -B197 Nickel Plated per QQ-N-290
Polarized “D” Type
Face Seal Gasket Silicone rubber per ZZ-R-765
Connector Contact numbers are marked on the side of the connector.
Numbers are marked on the low-numbered side only on 2- and 3-row right-angle
connectors.
Tolerances: Unless otherwise specified: Fractions ± 1/64, Decimals ± .010, Angles ± 5º.
* Contact factor y for options.
0018
AirBorn, Inc. • 4321 AirBorn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
W-3
The Interconnect Solution Source
Performance
Reference MIL-C-55302
Contact Rating: 5 amperes.
Solderability: Ter minals, except Wire Wrap® and crimp, tested to Method 208 of MIL-STD-202.
Wire Size: #22 AWG stranded (adapter sleeves available for larger sizes or twisted pairs).
Operating Temperature: -65ºto +125º C or -85ºto +257º F
Category Requirements Test Method Per
MIL-STD-1344
Test Voltage: 1,000 V, RMS, 60 Hz @ sea level
300 V, RMS, 60 Hz @ 70,000 feet #3001
Insulation
Resistance: 5,000 megohms minimum @ 500 VDC #3003
Durability: 500 connector mating cycles
Vibration: mated connectors, test condition III #2005
Salt Spray: mated connectors test condition B #1001
Shock: mated connectors, test condition G #2004
Humidity: test type II, except steps #1002
7A and 7B not required
Temperature Cycling: mated connectors, test condition A #1003
Contact Resistance: .025 volt maximum drop #3004
@ 5 amps – .005 ohms (Interface Measurement)
Contact Engaging 6.00 oz. maximum with .031 #2014 and
Force: dia. test pin IAW MS3197 MIL-C-55302
Contact Separation 0.50 oz. minimum with .029 #2014 and
Force: dia. test pin IAW MS3197 MIL-C-55302
Contact Engaging Force: for lower force contacts with a nominal engaging force of two ounces per socket con-
tact, substitutes the letter “O” for the letter “A”. Example: P/N WRG208SOCSY.
Sizes 50 and larger: upon engagement, center area of mating faces may remain open .010" to .025" due to
slight flexing of molding.Vibration or shock should provide complete closure.
Guides and Jacks: if location of pin or socket contacts is reversed, location of male and female guides or
jacks is also reversed; except when using “D” shaped polar ized guides.
When polarized positions are changed, apply Loctite®83-CV to threads.
NOTE: See Militar y Cross Reference Char t under next tab. ®Wirewrap is a registered trademark of Gardner-Denver Company.
®Loctite is a registered trademark of Loctite Corporation.
0018
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-4 9916
Par t Number Description
Each par t number consists of at least four elements: series, size, contacts, and hardware. A fifth element is added
whenever special modifications or options are available.
Each catalog page shows the choices available for each of these elements. By selecting one option from each
section on the catalog page, you can build a mated set of connectors which meet your requirements.
Each element is identified by a combination of letters and/or numbers of var ying lengths.These numbers are writ-
ten together without spaces or punctuation.
Series:
The series number identifies the connector body style. Some body moldings are modified to accommodate right-
angle pins but carry the same ser ies number. Follow choices on each catalog page for series numbers.
Size:
The size is determined by the number of contacts and is an integral par t of the par t number. Order only sizes
shown on the catalog page.
Contacts:
Each page also identifies all contact options for a given connector. Mating contacts are shown on the opposite side
of the same section on each page. Please note that star ting with the largest connectors, we are routinely substitut-
ing low-force sockets.
Hardware:
Hardware options are shown on each catalog page. Again, do not vary from listed choices without checking with
AirBorn.
Miscellaneous:
If options or modifications are available for a given connector, it will be stated on the catalog page, or you will be
referred to a different page for specific instructions. Remember when adding a suffix to the part number, add it
exactly as instructed.
PLUG RECEPTACLE
SERIES
WTA = 2-row, straight-plug, w/o mounting ears WTA = 2-row, straight, receptacle, w/o mounting ears
NUMBER OF CONTACTS
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
TYPE OF CONTACTS
• Pin or socket contacts can be used in either plug or receptacle.
• When pin contacts are use, standard hardware orientation places the female hardware next to the #1 pin contact.
• When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket.
PC Pin, straight, solder cup SAC Socket, straight, solder cup
PD5 Pin, straight, dip solder, .078 SAD7 Socket, straight, dip solder, .109
PD7 Pin, straight, dip solder, .109 SAD9 Socket, straight, dip solder, .140
PD9 Pin, straight, dip solder, .140 SAD11 Socket, straight, dip solder, .172
PD11 Pin, straight, dip solder, .172 SAF3 Socket, straight, flex-circuit, .050
PD13 Pin, straight, dip solder, .203 SAF6 Socket, straight, flex-circuit, .093
PD15 Pin, straight, dip solder, .234 SAF9 Socket, straight, flex-circuit, .140
PD20 Pin, straight, dip solder, .312 SAP
Socket, straight, pin termination, .150, connector saver
PF3 Pin, straight, flex-circuit, .050 SAW24 Socket, straight, wire wrap, .375
PF6 Pin,straight, flex circuit, .093 SAW40 Socket, straight, wire wrap, .625
PF8 Pin,straight, flex circuit, .125
PW34 Pin, straight, wire wrap, .513
PW40 Pin, straight, wire wrap. .625
TYPE OF HARDWARE
• Jackset hardware determines image of connector. Must specify image with Guide Set Hardware.
• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WTA10PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
JT = Turning jackset, .500 J = Fixed jackset
JTA = Tur ning Jackset, .200 JL = Fixed jackset, long
JTB = Hex turning jackset, .200
JTC = Hex turning jackset, .500
OPTIONS
• OPTION CODES: Add to the end of the part number. Example: WTA10SAD9J-D01. Call factor y for additional codes.
-443: Polar ized Pin installed in contact position noted by dash number. See “Polar ization” under next tab.
-444: Contact position noted by dash number is left open (to mate with -443). See “Polarization” under next tab.
-B82: Termination face sealed against conformal coating.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward or ientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-10
22•ROW
Connectors
Cable to
Board or Panel
Examples:
WTA-WTA
PLUG: WTA 26 PC JT
RECEPTACLE: WTA 26 SAD9 JL
0005
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-11
EXAMPLE: WTA26SAD9JLEXAMPLE: WTA26PCJT
EXAMPLE: WTA26PD9JLEXAMPLE: WTA26SACJT
.100
.250
.187 DIA
.035 INSIDE DIA
SOLDER CUP
.100
.150
.075
.500
2-S NC
TH'D
.150 .335 .140-PD9
OR
.172-PD11 .075
.100
.100
.050 TYP
.100 TYP
.250
#2 FLAT
WASHER
#2
LOCKWASHER
±.001
.027 DIA
2-S6 NC THD
.030±.001
DIA
.130 .130
.100
.250
.100 .100
.187 DIA
.100.150
.075 .500
.035 INSIDE DIA
SOLDER CUP
.335 .130
.030±.
001 DIA
2-56
NC THD
.050 TYP
.027±.001 DIA
.100
.100 TYP
.250
.247 2-56
NC THD
.130 .150
.335
#2 FLATWASHER
#2 LOCKWASHER
.140-PD9
OR
.172-PD11
.075
.100
SIZE A B C
10 .850 .650 .400
14 1.050 .850 .600
20 1.350 1.150 .900
24 1.550 1.350 1.100
26 1.650 1.450 1.200
30 1.850 1.650 1.400
36 2.150 1.950 1.700
40 2.350 2.150 1.900
44 2.550 2.350 2.100
50 2.850 2.650 2.400
54 3.050 2.850 2.600
56 3.150 2.950 2.700
60 3.350 3.150 2.900
66 3.650 3.450 3.200
70 3.850 3.650 3.400
WTA-WTA
Dimensions
0018
PLUG RECEPTACLE
SERIES
WTAV 2-row, straight, plug, w/o mounting ears WTAX 2-row, straight, receptacle, w/o mounting ears
WTAX 2-row, right-angle, receptacle, w/o mounting ears
NUMBER OF CONTACTS
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
TYPE OF CONTACTS
• Pin or socket contacts can be used in either plug or receptacle.
• When pin contacts are use, standard hardware orientation places the female hardware next to the #1 pin contact.
• When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket.
PC = Pin, straight, solder cup SAC = Socket, straight, solder cup
PD7 = Pin, straight, dip solder, .109 SAD7 = Socket, straight, dip solder, .109
PD9 = Pin, straight, dip solder, .140 SAD9 = Socket, straight, dip solder, .140
PD11 = Pin, straight, dip solder, .172 SAD11 = Socket, straight, dip solder, .172
PF3 = Pin, straight, flex-circuit, .050 SAF3 = Socket, straight, flex-circuit, .050
PF6 = Pin, straight, flex-circuit, .093 SAF6 = Socket, straight, flex-circuit, .093
PF8 = Pin, straight, flex-circuit, .125 SAF9 = Socket, straight, flex-circuit, .140
PW34 = Pin, straight, wire wrap, .531 SAP = Socket, straight, pin termination, .150
PW40 = Pin, straight, wire wrap, .625 SAW24 = Socket, straight, wire wrap, .375
SAW40 = Socket, straight, wire wrap, .625
SOR7 = Socket, right-angle, dip solder, .109
SOR9 = Socket, right-angle, dip solder, .140
SOR11 = Socket, right-angle, dip solder, .172
TYPE OF HARDWARE
• Jackset hardware determines image of connector. Must specify image with Guide Set Hardware.
• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WTAV10PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
SY = Guide Set SY = Guide Set
SY-# = Guide Set, polarized SY-# = Guide Set, polarized
SYL = Guide Set, long SYL = Guide Set, long
J = Fixed jackset JT = Tur ning jackset, .500
JL = Fixed jackset, long JTA = Tur ning jackset, .200
JTB = Hex turning jackset, .200
JTC = Tur ning jackset, .500
JTL = Long turning jackset, .700
OPTIONS
• OPTION CODES: Add to the end of the part number. Example: WTAV10SAD9J-D01. Call factor y for additional codes.
-443: Polar ized Pin installed in contact position noted by dash number. See “Polar ization” under next tab.
-444: Contact position noted by dash number is left open (to mate with -443). See “Polarization” under next tab.
-B82: Termination face sealed against conformal coating.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward or ientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-12
22•ROW
Connectors
Sandwich -
Boards
Examples:
WTAV-WTAX
WTAV26PD9SYL
WTAX26SAD9SYL
PLUG: WTAV 26 PD9 SYL
RECEPTACLE: WTAX 26 SAD9 SYL
0005
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 W-13
The Interconnect Solution Source
W-13
SIZE A B C
10 .850 .650 .400
14 1.050 .850 .600
20 1.350 1.150 .900
24 1.550 1.350 1.100
26 1.650 1.450 1.200
30 1.850 1.650 1.400
36 2.150 1.950 1.700
40 2.350 2.150 1.900
44 2.550 2.350 2.100
50 2.850 2.650 2.400
54 3.050 2.850 2.600
56 3.150 2.950 2.700
60 3.350 3.150 2.900
66 3.650 3.450 3.200
70 3.850 3.650 3.400
WTAV-WTAX
Dimensions
.100
.100
.150
.075
.140 .130 .130
2Ð56NC THD
±.001
0.027 DIA ±.001
0.027 DIA
.030+.001
DIA
.247
2-56 NC THD
#2 FLAT WASHER
#2 LOCKWASHER
PLUG IMAGE
EXAMPLE: WTAV26PD9SYL RECEPTACLE IMAGE
EXAMPLE: WTAX26SAD9SYL
.335 .150
.250
.050 TYP
C
.100
.075
.100
#2 FLAT WASHER
#2 LOCKWASHER
.335 .140 SAD9
OR .172 SAD11
.250
.100 TYP
0018
PLUG RECEPTACLE
SERIES
WTB = 2-row, right-angle, plug, w/ mounting ears WTB = 2-row, straight, receptacle, w/ mounting ears
WTB = 2-row, right-angle, receptacle, w/ mounting ears
NUMBER OF CONTACTS
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
TYPE OF CONTACTS
• The contact type deter mines image of connector, Pin right-angle contacts are always plug image, all other contacts, straight pin
or sockets are receptacle image. See page W-18 to switch image.
PR7 = Pin, right-angle, dip solder, .109 SAC = Socket, straight, solder cup
PR9 = Pin, right-angle, dip solder, .140 SAD7 = Socket, straight, dip solder, .109
PR11 = Pin, right-angle, dip solder, .172 SAD9 = Socket, straight, dip solder, .140
PR13 = Pin, right-angle, dip solder, .203 SAD11 = Socket, straight, dip solder, .172
PR15 = Pin, right-angle, dip solder, .234 SAF3 = Socket, straight, flex-circuit, .050
PR23 = Pin, right-angle, dip solder, .359 SAF6 = Socket, straight, flex-circuit, .093
PR30 = Pin, right-angle, dip solder, .470 SAF9 = Socket, straight, flex-circuit, .140
PRC = Pin, right-angle, solder cup SAW24 = Socket, straight, wire wrap, .375
PRW33 = Pin, right-angle, wire wrap, .515 SAW40 = Socket, straight, wire wrap, .625
PRW40 = Pin, right-angle, wire wrap, .625 SOR7 = Socket, right-angle, dip solder, .109, see W-17.
SOR9 = Socket, right-angle, dip solder, .140, see W-17.
SOR11 = Socket, right-angle, dip solder, .172, see W-17.
TYPE OF HARDWARE
• Plug facial seal gaskets; order separately or add “Q” in par t number. Example: WTB10PR9QJ. See “Gaskets” under next tab for
instructions.
SY = Guide Set SY = Guide Set
SY-# = Guide Set, polarized SY-# = Guide Set, polarized
SYL = Guide Set, long SYL = Guide Set, long
JT = Turning jackset, .500 J = Fixed jackset
JTA = Tur ning jackset, .200 JL = Fixed jackset, long
JTB = Hex turning jackset, .200
JTC = Tur ning jackset, .500
JTL = Long tur ning jackset, .700
OPTIONS
• OPTION CODES: Add to the end of the part number. Example: WTB10PCSY342. Call factory for additional codes.
-342: Remove .250-long mounting ears.
-443: Polar ized Pin installed in contact position noted by dash number.
-515: (Right-angle insulators only) Contact position noted by dash number is left open (to mate with -443).
-B82: Termination face sealed against conformal coating.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward or ientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-14 9916
22•ROW
Connectors
PC Card to
Chassis or
Board
Examples:
WTB-WTB
WTB26PR9SY
WTB26SAD11SY
PLUG: WTB 26 PR9 SY
RECEPTACLE: WTB 26 SAD11 SY
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 W-15
The Interconnect Solution Source
SIZE A B C D E
10 .850 .650 .400 1.100 1.350
14 1.050 .850 .600 1.300 1.550
20 1.350 1.150 .900 1.600 1.850
24 1.550 1.350 1.100 1.800 2.050
26 1.650 1.450 1.200 1.900 2.150
30 1.850 1.650 1.400 2.100 2.350
36 2.150 1.950 1.700 2.400 2.650
40 2.350 2.150 1.900 2.600 2.850
44 2.550 2.350 2.100 2.800 3.050
50 2.850 2.650 2.400 3.100 3.350
54 3.050 2.850 2.600 3.300 3.550
56 3.150 2.950 2.700 3.400 3.650
60 3.350 3.150 2.900 3.600 3.850
66 3.650 3.450 3.200 3.900 4.150
70 3.850 3.650 3.400 4.100 4.350
EXAMPLE: WTB26PR9SY EXAMPLE: WTB26SACSY
.250
.100
.350
.025±.001
DIA
PR7-.109
OR
PR9-.140
OR
PR11-.172
.150
.225
.325
.400
.125
.094
.120 DIA THRU
.190 HEX X .109 DEEP
(USE SMALL PATTERN 4-40 NUT)
.186
.250
.030
±.001 DIA
.150
.335
.094
.100
.120 DIA
.035 INSIDE DIA
SOLDER CUP
.250
.125
.015 .051
.120
.130
.130
.082
DIA
.050 .100
.075
.100
.027±.001 DIA
MOTHER BOARD EXAMPLE:
WTB26SAD9SY
ALT END VIEW
.140-SAD9
OR
.172-SAD11
.234-SAD15
.100
WTB-WTB
Dimensions
0018
PLUG RECEPTACLE
SERIES
WGV = 3-row, straight, plug, mounting ears WGX = 3-row, straight, receptacle, mounting ears
WGX = 3-row, r ight-angle, receptacle, mounting ears
NUMBER OF CONTACTS
50, 62, 80, 92, 104 50, 62, 80, 92, 104
TYPE OF CONTACTS
• Pin or socket contacts can be used in either receptacle.
• When pin contacts are used, standard hardware orientation places the female hardware next to the #1 position.
• When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket position.
PC = Pin, straight, solder cup SAC = Socket, straight, solder cup
PD7 = Pin, straight, dip solder, .109 SAD7 = Socket, straight, dip solder, .109
PD9 = Pin, straight, dip solder, .140 SAD9 = Socket, straight, dip solder, .140
PD11 = Pin, straight, dip solder, .172 SAD11 = Socket, straight, dip solder, .172
PD13 = Pin, straight, dip solder, .203 SAF3 = Socket, straight, flex-circuit, .050
PF3 = Pin, straight, flex-circuit, .050 SAF6 = Socket, straight, flex-circuit, .093
PF6 = Pin, straight, flex-circuit, .093 SAF9 = Socket, straight, flex-circuit, .140
PF8 = Pin, straight, flex-circuit, .125 SAP = Socket, straight, pin termination, .150, connector saver
PW34 = Pin, straight, wire wrap, .531 SAW24 = Socket, straight, wire wrap, .375
PW40 = Pin, straight, wire wrap, .625 SAW40 = Socket, straight, wire wrap, .625
SOR7 = Socket, right-angle, dip solder, .109, see page W-39.
SOR9 = Socket, right-angle, dip solder, .140, see page W-39.
SOR11 = Socket, right-angle, dip solder, .172, see page W-39.
TYPE OF HARDWARE
• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WTA10PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
SY = Guide Set SY = Guide Set
SY-# = Guide Set, polarized SY-# = Guide Set, polarized
SYL = Guide Set, long SYL = Guide Set, long
JT = Turning jackset, .500 J = Fixed jackset
JTA = Tur ning jackset, .200 JL = Fixed jackset, long
JTB = Hex turning jackset, .200
JTC = Tur ning jackset, .500
JTL = Long tur ning jackset, .700
OPTIONS
• OPTION CODES: Add to the end of the part number. Example: WGV80PD9SY342. Call factor y for additional codes.
-342: Remove .250 mounting ears.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-G69: Solder cups are fixed in an outward or ientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-40
PLUG: WGV 80 PD9 SY
RECEPTACLE: WTBT WGX 80 SAD11 SY
33•ROW
Connectors
Sandwich
Boards or to
PC Card
Examples:
WGV-WGX
WGV80PD9SY
WGX80SAD11SY
0018
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
W-41
The Interconnect Solution Source
SIZE A B C D E F
BASIC BASIC ±.010 REF BASIC BASIC
50 1.800 2.250 2.500 2.000 1.600 1.500
62 2.200 2.650 2.900 2.400 2.00 1.900
80 2.800 3.250 3.500 3.000 2.600 2.500
92 3.200 3.650 3.900 3.400 3.000 2.900
104 3.600 4.050 4.300 3.800 3.400 3.300
WGV-WGX
Dimensions
0005
PLUG RECEPTACLE
SERIES
WRF = 4-row, straight, plug, w/o mounting ears WRF = 4-row, straight, receptacle
NUMBER OF CONTACTS
100 100
TYPE OF CONTACTS
• Contact Identification: Looking at the mating face of the connector, each contact has a double indicator designation, including a row
letter plus a position number. Rows A and C contain odd numbers 1 thru 49: rows B and D contain even numbers 2 thru 50.
PC = Pin, straight, solder cup SAC = Socket, straight, solder cup
PD11 = Pin, straight, dip solder, .172 SAD9 = Socket, straight, dip solder, .140
PF6 = Pin, straight, flex-circuit, .093 SAD11 = Socket, straight, dip solder, .172
SAP = Socket, straight, pin termination, .150, connector saver
TYPE OF HARDWARE
JTB = Hex turning jackset, .200 JL = Fixed jackset, long
JTL = Long tur ning jackset
OPTIONS
• OPTION CODES: Add to the end of the par t number. Example: WRF100SAD11JL-D54. Call factory for additional codes.
-B82: Termination face sealed against conformal coating.
-D54: Combine -B82 and -D01 special codes.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-54 9916
PLUG: WRF 100 PC JTL
RECEPTACLE: WRF 100 SAD11 JL
44•ROW
Connectors
Cable to Board
or Panel
Examples:
WRF-WRF
WRF100PCJTL
WRF100SAD11JL
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 W-55
The Interconnect Solution Source
AB CDE F
3.375 3.100 2.500 1.200 1.100 2.750
WRF-WRF
Dimensions
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
C-1
The Interconnect Solution Source
CONTACTS
#22 PINS AND SOCKETS
FOR WT, WTA, WTB, WTK, WG, WGA SERIES
0005
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
C-2
CONTACTS
CRIMP REMOVABLE
f or WTDX, WTDXA, WTK, WTKA Series
CONTACTS
COAX CONTACTS
0005
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 C-3
The Interconnect Solution Source
THE LF5 HELIX™ CONTACT
These advantages are embodied in AirBor n’s new LHF Helix™ line of contacts and
connectors.The precise wire locations, controlled by a notched housing, minimize
force variations; the resulting stability confers some unique performance advantages
on the LHF Helix™ connector.These are documented on the next page.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
C-4 9916
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 C-5
The Interconnect Solution Source
REFERENCE CHART
CONTACTS AND HARDWARE
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
H-1 9916
HARDWARE
JACKSETS
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 H-2
The Interconnect Solution Source
HARDWARE
GUIDE SETS
NOTE:
UNDER NORMAL CONDI-
TIONS, JACKSCREWS OR
GUIDE PIN IS AT SOCKET
CONTACT POTISION #1,
AND JACKSOCKET OR
GUIDE SOCKET IS AT PIN
CONTACT POSITION #1.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 H-3
The Interconnect Solution Source
Hardware Availability By Connector Series
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
H-4 9916
Hardware Availability By Connector Series (Cont’d.)
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
9916 P-1
The Interconnect Solution Source
Polarization
D-SHAPED GUIDE SETS
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
P-2 9916
Polarization
POLARIZING PIN APPLICATION
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
X-1
The Interconnect Solution Source
or
MIL Number W Series MIL Number W Series
/55-A##L WTA##SACJTL /57-A##X WTB##PR7SY
/55-A##M WTA##SACJT /57-A##Y WTB##PR7SY-1
/55-A##S WTA##SACJTA /57-A##Y-2 thru -64 WTB##PR7SY-2 thru -64
/55-A##H WTA##SACJTB /57-A##Y-0 WTB##PR7SY-0
/57-A##S WTB##PR7JTA
/57-A##H WTB##PR7JTB
/55-B##L WTA##SAD9JTL
/55-B##M WTA##SAD9JT
/55-B##S WTA##SAD9JTA /57-B##X WTB##PR9SY
/55-B##H WTA##SAD9JTB /57-B##Y WTB##PR9SY-1
/57-B##Y-2 thru -64 WTB##PR9SY-2 thru -64
/57-B##Y-0 WTB##PR9SY-0
/55-C##L WTA##SAD11JTL /57-B##S WTB##PR9JTA
/55-C##M WTA##SAD11JT /57-B##H WTB##PR9JTB
/55-C##S WTA##SAD11JTA
/55-C##H WTA##SAD11JTB /57-C##X WTB##PR11SY
/57-C##Y WTB##PR11SY-1
/57-C##Y-2 thru -64 WTB##PR11SY-2 thru -64
/55-D##L WTA##SAF3JTL /57-C##Y-0 WTB##PR11SY-0
/55-D##M WTA##SAF3JT /57-C##S WTB##PR11JTA
/55-D##S WTA##SAF3JTA /57-C##H WTB##PR11JTB
/55-D##H WTA##SAF3JTB /57-01 TN1650 Spanner Nut Wrench
/55-E##L WTA##SAD15JTL
/55-E##M WTA##SAD15JT
/55-E##S WTA##SAD15JTA
/55-E##H WTA##SAD15JTB
/55-F##L WTA##SAF6JTL
/55-F##M WTA##SAF6JT
/55-F##S WTA##SAF6JTA
/55-F##H WTA##SAF6JTB
/56-A## WTA##PCJL
/56-B## WTA##PD9JL
/56-C## WTA##PD11JL
/56-D## WTA##PW40JL
/56-E## WTA##PF3JL
/56-F## WTA##PF6JL
MIL-C-55302/55 - Standard Insertion Force Contacts
MIL-C-55302/55L - Low Insertion Force Contacts
## Indicates Number of Contacts ## Indicates Number of Contacts
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
MIL-C-55302/57
MIL-C-55302/56
MILITARY CROSS REFERENCE CHART
MIL-C-55302/55 thru MIL-C-55302/66, MIL-C-55302/138 and /139
0025
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
X-2
or
Mil No. W series Mil No. W series
/58-A##X WTB##SACSY /58-H##X WTB##SAF6SY
/58-A##Y WTB##SACSY-1 /58-H##Y WTB##SAF6SY-1
/58-A##Y-2 thru -64 WTB##SACSY-2 thru -64 /58-H##Y-2 thru -64 WTB##SAF6SY-2 thru -64
/58-A##Y-0 WTB##SACSY-0 /58-H##Y-0 WTB##SAF6SY-0
/58-A##F WTB##SACJ /58-H##F WTB##SAF6J
/58-A##S WTB##SACJTA /58-H##S WTB##SAF6JTA
/58-A##H WTB##SACJTB /58-H##H WTB##SAF6JTB
/58-B##X WTB##SAD9SY /59 ### Indicates No. of contacts: 90,100 AND 120
/58-B##Y WTB##SAD9SY-1 /59-A###X WTB###PR7SY
/58-B##Y-2 thru -64 WTB##SAD9SY-2 thru -64 /59-A###Y WTB###PR7SY-1
/58-B##Y-0 WTB##SAD9SY-0 /59-A###Y-2 thru -64 WTB###PR7SY-2 thru -64
/58-B##F WTB##SAD9J /59-A###Y-0 WTB###PR7SY-0
/58-B##S WTB##SAD9JTA /59-A###F WTB###PR7J
/58-B##H WTB##SAD9JTB /59-A###S WTB###PR7JTA
/59-A###H WTB###PR7JTB
/58-C##X WTB##SAD11SY
/58-C##Y WTB##SAD11SY-1 /59-B###X WTB###PR9SY
/58-C##Y-2 thru -64 WTB##SAD11SY-2 thru -64 /59-B###Y WTB###PR9SY-1
/58-C##Y-0 WTB##SAD11SY-0 /59-B###Y-2 thru -64 WTB###PR9SY-2 thru -64
/58-C##F WTB##SAD11J /59-B###Y-0 WTB###PR9SY-0
/58-C##S WTB##SAD11JTA /59-B###F WTB###PR9J
/58-C##H WTB##SAD11JTB /59-B###S WTB###PR9JTA
/59-B###H WTB###PR9JTB
/58-D##X WTB##SAW40SY
/58-D##Y WTB##SAW40SY-1 /59-C###X WTB###PR11SY
/58-D##Y-2 thru -64 WTB##SAW40SY-2 thru -64 /59-C###Y WTB###PR11SY-1
/58-D##Y-0 WTB##SAW40SY-0 /59-C###Y-2 thru -64 WTB###PR11SY-2 thru -64
/58-D##F WTB##SAW40J /59-C###Y-0 WTB###PR11SY-0
/58-D##S WTB##SAW40JTA /59-C###F WTB###PR11J
/58-D##H WTB##SAW40JTB /59-C###S WTB###PR11JTA
/59-C###H WTB###PR11JTB
/58-E##X WTB##SAF3SY
/58-E##Y WTB##SAF3SY-1
/58-E##Y-0 WTB##SAF3SY-0
/58-E##F WTB##SAF3J
/58-E##S WTB##SAF3JTA
/58-E##H WTB##SAF3JTB
/58-F##X WTB##SAD15SY
/58-F##Y WTB##SAD15SY-1
/58-F##Y-2 thru -64 WTB##SAD15SY-2 thru -64
/58-F##Y-0 WTB##SAD15SY-0
/58-F##F WTB##SAD15J
/58-F##S WTB##SAD15JTA
/58-F##H WTB##SAD15JTB
MIL-C-55302/58
/58-E##Y-2 thru -64 WTB##SAF3SY-2 thru -64
MIL-C 55302/58 - Standard insertion force contacts
MIL-C-55302/58L - Low insertion force contacts
0025
MILITARY
CROSS REFERENCE CHART (CONT’D.)
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
X-3
The Interconnect Solution Source
or or
MIL No. W Series MIL No. W Series
/60-A###X WTB###SACSY /62-A##L WTAX##SACJTL
/60-A###Y WTB###SACSY-1 /62-A##M WTAX##SACJT
/60-A###Y-2 thru -64 WTB###SACSY-2 thru -64 /62-A##S WTAX##SACJTA
/60-A###Y-0 WTB###SACSY-0 /62-A##H WTAX##SACJTB
/60-A###F WTB###SACJ
/60-A###S WTB###SACJTA /62-B##L WTAX##SAD9JTL
/60-A###H WTB###SACJTB /62-B##M WTAX##SAD9JTL
/62-B##S WTAX##SAD9JTA
/60-B###X WTB###SAD9SY /62-B##H WTAX##SAD9JTB
/60-B###Y WTB###SAD9SY-1
/60-B###Y-2 thru -64 WTB###SAD9SY-2 thru -64 /62-C##L WTAX##SAD11JTL
/60-B###Y-0 WTB###SAD9SY-0 /62-C##M WTAX##SAD11JT
/60-B###F WTB###SAD9J /62-C##S WTAX##SAD11JTA
/60-B###S WTB###SAD9JTA /62-C##H WTAX##SAD11JTB
/60-B###H WTB###SAD9JTB /62-D##L WTAX##SAF3JTL
/60-C###X WTB###SAD11SY /62-D##M WTAX##SAF3JT
/60-C###Y WTB###SAD11SY-1 /62-D##S WTAX##SAF3JTA
/60-C###Y-2 thru -64 WTB###SAD11SY-2 thru -64 /62-D##H WTAX##SAF3JTB
/60-C###Y-0 WTB###SAD11SY-0
/60-C###F WTB###SAD11J /62-E##L WTAX##SAD15JTL
/60-C###S WTB###SAD11JTA /62-E##M WTAX##SAD15JT
/60-C###H WTB###SAD11JTB /62-E##S WTAX##SAD15JTA
/62-E##H WTAX##SAD15JTB
/60-D###X WTB###SAW40SY
/60-D###Y WTB###SAW40SY-1 /62-F##L WTAX##SAF6JTL
/60-D###Y-2 thru -64 WTB###SAW40SY-2 thru -64 /62-F##M WTAX##SAF6JT
/60-D###Y-0 WTB###SAW40SY-0 /62-F##S WTAX##SAF6JTA
/60-D###F WTB###SAW40J /62-F##H WTAX##SAF6JTB
/60-D###S WTB###SAW40JTA
/60-D###H WTB###SAW40JTB MIL-C-55302/63
/63-A##L WTA##PCJTL
/60-E###X WTB###SAD15SY /63-A##M WTA##PCJT
/60-E###Y WTB###SAD15SY-1 /63-A##S WTA##PCJTA
/60-E###Y-2 thru -64 WTB###SAD15SY-2 thru -64 /63-A##H WTA##PCJTB
/60-E###F WTB###SAD15J /63-A##F WTAV##PCJL
/60-E###S WTB###SAD15JTA /63-A##X WTAV##PCSYL
/60-E###H WTB###SAD15JTB /63-A##Y WTAV##PCSYL-1
/63-A##Y-2 thru -64 WTAV##PCSYL-2 thru -64
MIL-C-55302/61 /63-A##Y-0 WTAV##PCSYL-0
## Indicates No. of Contacts
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 60, 70
/61-A## WTB##PR7J
/61-C## WTB##PR11J
### Indicates No. of Contacts ## Indicates No. of Contacts
90, 100, and 120 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
/61-B## WTB##PR9J
MIL-C-55302/62L Low Insertion Force Contacts
/60-E###Y- 0 WTB###SAD15SY-0
MIL-C 55302/60-Standard Inserion Force Contacts
MIL-C 55302/60L Low Insertion Force Contacts
MIL-C-55302/62- Standard Insertion Force Contacts
MILITARY
CROSS REFERENCE CHART (CONT’D.)
0025
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
X-4
or
MIL NO. W SERIES MIL NO. W SERIES
/63-B##L WTA##PD9JTL /64-A##F WTA##SACJL
/63-B##M WTA##PD9JT /64-A##X WTAX##SACSYL
/63-B##S WTA##PD9JTA /64-A##Y WTAX##SACSYL-1
/63-B##H WTA##PD9JTB /64-A##Y-2 thru -64 WTAX##SACSYL-2 thru -64
/63-B##F WTAV##PD9JL /64-A##Y-0 WTAX##SACSYL-0
/63-B##X WTAV##PD9SYL /64-B##F WTA##SAD9JL
/63-B##Y WTAV##PD9SYL-1 /64-B##X WTAX##SAD9SYL
/63-B##Y-2 thru -64 WTAV##PD9SYL-2 thru -64 /64-B##Y WTAX##SAD9SYL-1
/63-B##Y-0 WTAV##PD9SYL-0 /64-B##Y-2 thru -64 WTAX##SAD9SYL-2 thru -64
/64-B##Y-0 WTAX##SAD9SYL-0
/63-C##L WTA##PD11JTL
/63-C##M WTA##PD11JT /64-C##F WTA##SAD11JL
/63-C##S WTA##PD11JTA /64-C##X WTAX##SAD11SYL
/63-C##H WTA##PD11JTB /64-C##Y WTAX##SAD11SYL-1
/63-C##F WTAV##PD11JL /64-C##Y-2 thru -64 WTAX##SAD11SYL-2 thru -64
/64-C##Y-0 WTAX##SAD11SYL-0
/63-C##X WTAV##PD11SYL
/63-C##Y WTAV##PD11SYL-1 /64-D##F WTA##SAW40JL
/63-C##Y-2 thru -64 WTAV##PD11SYL-2 thru -64 /64-D##X WTAX##SAW40SYL
/63-C##Y-0 WTAV##PD11SYL-0 /64-D##Y WTAX##SAW40SYL-1
/64-D##Y-2 thru -64 WTAX##SAW40SYL-2 thru -64
/63-D##L WTA##PF3JTL /64-D##Y-0 WTAX##SAW40SYL-0
/63-D##M WTA##PF3JT
/63-D##S WTA##PF3JTA /64-E##F WTA##SAF3JL
/63-D##H WTA##PF3JTB /64-E##X WTAX##SAF3SYL
/63-D##F WTAV##PF3JL /64-E##Y WTAX##SAF3SYL-1
/64-E##Y-2 thru -64 WTAX##SAF3SYL-2 thru -64
/63-D##X WTAV##PF3SYL /64-E##Y-0 WTAX##SAF3SYL-0
/63-D##Y WTAV##PF3SYL-1
/63-D##Y-2 thru -64 WTAV##PF3SYL-2 thru -64 /64-F##F WTA##SAF6JL
/63-D##Y-0 WTAV##PF3SYL-0 /64-F##X WTAX##SAF6SYL
/64-F##Y WTAX##SAF6SYL-1
/63-E##L WTA##PF6JTL /64-F##Y-2 thru -64 WTAX##SAF6SYL-2 thru -64
/64-F##Y-0 WTAX##SAF6SYL-0
/63-E##S WTA##PF6JTA
/63-E##H WTA##PF6JTB
/63-E##F WTAV##PF6JL
/63-E##X WTAV##PF6SYL
/63-E##Y WTAV##PF6SYL-1
/63-E##Y-2 thru -64 WTAV##PF6SYL-2 thru -64
/63-E##Y-0 WTAV##PF6SYL-0
MIL-C-55302-64L Low Insertion Force Contacts
/63-E##M WTA##PF6JT
MIL-C-55302/63
MIL-C-55302-64- Standard Insertion Force Contacts
## Indicates No. of Contacts ## Indicates No. of Contacts
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
0025
MILITARY
CROSS REFERENCE CHART (CONT’D.)
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
X-5
The Interconnect Solution Source
MIL-C 55302-65L & /66L Low Insertion Force Sockets MIL-C-55302/139
/65L##X WTKA##SASY /139-B160X WG160SAD7SY
/65L##Y WTKA##SASY-1 /139-B160Y WG160SAD7SY-1
/65L##Y-2 thru -64 WTKA##SASY-2 thru -64 /139-B160Y-2 thru -64 WG160SAD7SY-2 thru -64
/65L##Y-0 WTKA##SASY-0 /139-B160Y-0 WG160SAD7SY-0
/65L##F WTKA##SAJ /139-B160F WG160SAD7J
/65L##S WTKA##SAJTA /139-B160S WG160SAD7JTA
/65L##H WTKA##SAJTB /139-B160H WG160SAD7JTB
/65-01 Crimp Contact WTK2222S /139-C160X WG160SAD9SY
/65-02 Crimp Contact WTK2222SA Low Force Socket /139-C160Y WG160SAD9SY-1
/66L##L WTDXA##SAJTL /139-C160Y-2 thru -64 WG160SAD9SY-2 thru -64
/66L##M WTDXA##SAJT /139-C160Y-0 WG160SAD9SY-0
/66L##S WTDXA##SAJTA /139-C160F WG160SAD9J
/66L##F WTDXA##SAJ /139-C160S WG160SAD9JTA
/66L##H WTDXA##SAJTB /139-C160H WG160SAD9JTB
MIL-C-55302/138 Number of Contacts: 160
/138-A160X WG160PR7SY /139-D160X WG160SAW40SY
/138-A160Y WG160PR7SY-1 /139-D160Y WG160SAW40SY-1
/138-A160Y-2 thru -64 WG160PR7SY-2 thru -64 /139-D160Y-2 thru -64 WG160SAW40SY-2 thru -64
/138-A160Y-0 WG160PR7SY-0 /139-D160Y-0 WG160SAW40SY-0
/138-A160F WG160PR7J /139-D160F WG160SAW40J
/138-A160S WG160PR7JTA /139-D160S WG160SAW40JTA
/138-A160H WG160PR7JTB /139-D160H WG160SAW40JTB
/138-B160X WG160PR9SY /139-E160X WG160SAD11SY
/138-B160Y WG160PR9SY-1 /139-E160Y WG160SAD11SY-1
/138-B160Y-2 thru -64 WG160PR9SY-2 thru -64 /139-E160Y-2 thru -64 WG160SAD11SY-2 thru -64
/138-B160Y-0 WG160PR9SY-0 /139-E160Y-0 WG160SAD11SY-0
/138-B160F WG160PR9J /139-E160F WG160SAD11J
/138-B160S WG160PR9JTA /139-E160S WG160SAD11JTA
/138-B160H WG160PR9JTB /139-E160H WG160SAD11JTB
/138-C160X WG160PR11SY /139-F160X WG160SAF3SY
/138-C160Y WG160PR11SY-1 /139-F160Y WG160SAF3SY-1
/138-C160Y-2 thru -64 WG160PR11SY-2 thru -64 /139-F160Y-2 thru -64 WG160SAF3SY-2 thru -64
/138-C160Y-0 WG160PR11SY-0 /139-F160Y-0 WG160SAF3SY-0
/139-F160F WG160SAF3J
/138-C160S WG160PR11JTA /139-F160S WG160SAF3JTA
/138-C160H WG160PR11JTB /139-F160H WG160SAF3JTB
/139-H160X WG160SAF6SY
/139-A160X WG160SACSY /139-H160Y WG160SAF6SY-1
/139-A160Y WG160SACSY-1 /139-H160Y-2 thru -64 WG160SAF6SY-2 thru -64
/139-A160Y-2 thru -64 WG160SACSY-2 thru -64 /139-H160Y-0 WG160SAF6SY-0
/139-A160Y-0 WG160SACSY-0 /139-H160F WG160SAF6J
/139-A160F WG160SACJ /139-H160S WG160SAF6JTA
/139-A160S WG160SACJTA /139-H160H WG160SAF6JTB
/139-A160H WG160SACJTB
MIL NO. W SERIES
## Indicates No. of Contacts Number of Contacts
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 160
/138-C160F WG160PR11J
MIL-C-55302/139
MIL-C 55302/65-AND /66- Standard Insertion Force Sockets
MIL NO. W SERIES
MILITARY
CROSS REFERENCE CHART
0025
PLUG RECEPTACLE
SERIES
WTBV = 2-row, straight-plug, mounting ears WTB = 2-row, straight, receptacle, mounting ears
WTB = 2-row, right-angle, receptacle, mounting ears
NUMBER OF CONTACTS
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
TYPE OF CONTACTS
• Pin or socket contacts can be used in either plug or receptacle.
• When pin contacts are used, standard hardware orientation places the female hardware next to the #1 position.
• When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket position.
PC = Pin, straight, solder cup SAC = Socket, straight, solder cup
PD7 = Pin, straight, dip solder, .109 SAD7 = Socket, straight, dip solder, .109
PD9 = Pin, straight, dip solder, .140 SAD9 = Socket, straight, dip solder, .140
PD11 = Pin, straight, dip solder, .172 SAD11 = Socket, straight, dip solder, .172
PD13 = Pin, straight, dip solder, .203 SAF3 = Socket, straight, flex-circuit, .050
PF3 = Pin, straight, flex-circuit, .050 SAF6 = Socket, straight, flex-circuit, .093
PF6 = Pin, straight, flex-circuit, .093 SAF9 = Socket, straight, flex-circuit, .140
PF8 = Pin, straight, flex-circuit, .125 SAP = Socket, straight,
pin termination, .150, connector saver
PW34 = Pin, straight, wire wrap, .531 SAW24 = Socket, straight, wire wrap, .375
PW40 = Pin, straight, wire wrap, .625 SAW40 = Socket, straight, wire wrap, .625
SOR7 = Socket, right-angle, dip solder, .109, see W-17.
SOR9 = Socket, right-angle, dip solder, .140, see W-17.
SOR11 = Socket, right-angle, dip solder, .172, see W-17.
TYPE OF HARDWARE
• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WTBV10PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
SY = Guide Set SY = Guide Set
SY-# = Guide Set, polarized SY-# = Guide Set, polarized
SYL = Guide Set, long SYL = Guide Set, long
JT = Turning jackset, .500 J = Fixed jackset
JTA = Tur ning jackset, .200 JL = Fixed jackset, long
JTB = Hex turning jackset, .200
JTC = Tur ning jackset, .500
JTL = Long tur ning jackset, .700
OPTIONS
• OPTION CODES: Add to the end of the par t number. Example: WTBV10PCSY342. Call factory for additional codes.
-B82: Termination face sealed against conformal coating.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward or ientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-18
PLUG: WTBV90 PD9 SY
RECEPTACLE: WTB 90 SAD11 SY
22•ROW
Connectors
Sandwich -
Boards
Examples:
WTBV-WTB
0005
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
W-19
The Interconnect Solution Source
SIZE A B C D E
10 .850 .650 .400 1.100 1.350
14 1.050 .850 .600 1.300 1.550
20 1.350 1.150 .900 1.600 1.850
24 1.550 1.350 1.100 1.800 2.050
26 1.650 1.450 1.200 1.900 2.150
30 1.850 1.650 1.400 2.100 2.350
36 2.150 1.950 1.700 2.400 2.650
40 2.350 2.150 1.900 2.600 2.850
44 2.550 2.350 2.100 2.800 3.050
50 2.850 2.650 2.400 3.100 3.350
54 3.050 2.850 2.600 3.300 3.550
56 3.150 2.950 2.700 3.400 3.650
60 3.350 3.150 2.900 3.600 3.850
66 3.650 3.450 3.200 3.900 4.150
70 3.850 3.650 3.400 4.100 4.350
WTBV-WTB
Dimensions
PLUG IMAGE
EXAMPLE: WTBV26PD9SY RECEPTACLE IMAGE
EXAMPLE: WTB26SAD9SY
.100 .250
.125
TYP
.125
.100
TYP
EDC
.100
.225
.150
.075 .100
.075
.050
TYP
.120 DIA THRU
2 PLCS
CB
.130
.150
.130
.082
DIA
.100
.075
.120 DIA THRU
2 PLCS
.100
.075
.225
AA
.030+.001
DIA
PD 9-.140
PD 11-.172
.027+.001
DIA .027+.001
DIA
.335 .094
.250
.094 .335 .140-SED 9
OR
.172-SED 11
OR
.234-SED 15
.150.250
.125
.100
BCCDE
.050
TYP
.100
.250
0018
