The Interconnect Solution Source Specifications Materials and Finish Series W and Series M55302 Pin Contacts: PC, PD, PF, PR, PW Copper Alloy per MIL-C-55302 Socket Contacts: Contact: Terminal: SAC, SAD, SAF, SAR, SAW (clipped) Socket Contacts: Contact: Terminal: S, SA (Crimp, Removable) Contact Finish: Gold plate per MIL-G-45204 Localized finish per MIL-C-55302 Molded Inserts Glass filled polyphenylene sulfide per MIL-M-24519, Type GST-40F* Jackscrews, Jacksockets, Jackscrew Knobs, Guide Pins, Guide Sockets Stainless steel, per ASTM-A582, passivated per QQ-P-35 Guide Sockets, Polarized "D" Type Be Cu per ASTM-B196, -B197 Nickel Plated per QQ-N-290 Face Seal Gasket Silicone rubber per ZZ-R-765 Connector Contact numbers are marked on the side of the connector. Numbers are marked on the low-numbered side only on 2- and 3-row right-angle connectors. Tolerances: Unless otherwise specified: Fractions 1/64, Decimals .010, Angles 5. Be Cu Per MIL-C-55302 Copper Alloy per MIL-C-55302 Copper Alloy per MIL-C-55302 Gold plate per MIL-G-45204 Localized finish per MIL-C-55302 * Contact factory for options. "W" Series Connectors W-2 AirBorn, Inc. * 4321 AirBorn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0018 The Interconnect Solution Source Performance Reference MIL-C-55302 Contact Rating: 5 amperes. Solderability: Terminals, except Wire Wrap(R) and crimp, tested to Method 208 of MIL-STD-202. Wire Size: #22 AWG stranded (adapter sleeves available for larger sizes or twisted pairs). Operating Temperature: -65 to +125 C or -85 to +257 F Category Requirements Test Voltage: 1,000 V, RMS, 60 Hz @ sea level 300 V, RMS, 60 Hz @ 70,000 feet #3001 Insulation Resistance: 5,000 megohms minimum @ 500 VDC #3003 Durability: 500 connector mating cycles Vibration: Salt Spray: mated connectors, test condition III mated connectors test condition B #2005 #1001 Shock: mated connectors, test condition G #2004 Humidity: test type II, except steps 7A and 7B not required #1002 Temperature Cycling: mated connectors, test condition A #1003 Contact Resistance: .025 volt maximum drop @ 5 amps - .005 ohms (Interface Measurement) #3004 Contact Engaging Force: 6.00 oz. maximum with .031 dia. test pin IAW MS3197 #2014 and MIL-C-55302 Contact Separation Force: 0.50 oz. minimum with .029 dia. test pin IAW MS3197 #2014 and MIL-C-55302 Test Method Per MIL-STD-1344 Contact Engaging Force: for lower force contacts with a nominal engaging force of two ounces per socket contact, substitutes the letter "O" for the letter "A". Example: P/N WRG208SOCSY. Sizes 50 and larger: upon engagement, center area of mating faces may remain open .010" to .025" due to slight flexing of molding. Vibration or shock should provide complete closure. Guides and Jacks: if location of pin or socket contacts is reversed, location of male and female guides or jacks is also reversed; except when using "D" shaped polarized guides. When polarized positions are changed, apply Loctite(R)83-CV to threads. (R)Wirewrap is a registered trademark of Gardner-Denver Company. NOTE: See Military Cross Reference Chart under next tab. 0018 (R)Loctite is a registered trademark of Loctite Corporation. AirBorn, Inc. * 4321 AirBorn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors W-3 The Interconnect Solution Source Part Number Description Each part number consists of at least four elements: series, size, contacts, and hardware. A fifth element is added whenever special modifications or options are available. Each catalog page shows the choices available for each of these elements. By selecting one option from each section on the catalog page, you can build a mated set of connectors which meet your requirements. Each element is identified by a combination of letters and/or numbers of varying lengths. These numbers are written together without spaces or punctuation. Series: The series number identifies the connector body style. Some body moldings are modified to accommodate rightangle pins but carry the same series number. Follow choices on each catalog page for series numbers. Size: The size is determined by the number of contacts and is an integral part of the part number. Order only sizes shown on the catalog page. Contacts: Each page also identifies all contact options for a given connector. Mating contacts are shown on the opposite side of the same section on each page. Please note that starting with the largest connectors, we are routinely substituting low-force sockets. Hardware: Hardware options are shown on each catalog page. Again, do not vary from listed choices without checking with AirBorn. Miscellaneous: If options or modifications are available for a given connector, it will be stated on the catalog page, or you will be referred to a different page for specific instructions. Remember when adding a suffix to the part number, add it exactly as instructed. "W" Series Connectors W-4 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com The Interconnect Solution Source 2 * ROW Connectors Cable to Board or Panel WTA-WTA Examples: PLUG: RECEPTACLE: PLUG WTA 26 WTA 26 PC JT SAD9 JL RECEPTACLE SERIES WTA = 2-row, straight-plug, w/o mounting ears WTA = 2-row, straight, receptacle, w/o mounting ears NUMBER OF CONTACTS 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 TYPE OF CONTACTS * Pin or socket contacts can be used in either plug or receptacle. * When pin contacts are use, standard hardware orientation places the female hardware next to the #1 pin contact. * When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket. PC PD5 PD7 PD9 PD11 PD13 PD15 PD20 PF3 PF6 PF8 PW34 PW40 Pin, straight, solder cup Pin, straight, dip solder, .078 Pin, straight, dip solder, .109 Pin, straight, dip solder, .140 Pin, straight, dip solder, .172 Pin, straight, dip solder, .203 Pin, straight, dip solder, .234 Pin, straight, dip solder, .312 Pin, straight, flex-circuit, .050 Pin,straight, flex circuit, .093 Pin,straight, flex circuit, .125 Pin, straight, wire wrap, .513 Pin, straight, wire wrap. .625 SAC SAD7 SAD9 SAD11 SAF3 SAF6 SAF9 SAP SAW24 SAW40 Socket, straight, solder cup Socket, straight, dip solder, .109 Socket, straight, dip solder, .140 Socket, straight, dip solder, .172 Socket, straight, flex-circuit, .050 Socket, straight, flex-circuit, .093 Socket, straight, flex-circuit, .140 Socket, straight, pin termination, .150, connector saver Socket, straight, wire wrap, .375 Socket, straight, wire wrap, .625 TYPE OF HARDWARE * Jackset hardware determines image of connector. Must specify image with Guide Set Hardware. * Plug facial seal gaskets and hoods; order separately or add "Q" in part number. Example: WTA10PD9QJ. See "Gaskets" and "Hoods" under next tab for instructions. JT = Turning jackset, .500 J = Fixed jackset JTA = Turning Jackset, .200 JL = Fixed jackset, long JTB = Hex turning jackset, .200 JTC = Hex turning jackset, .500 OPTIONS * OPTION CODES: Add to the end of the part number. Example: WTA10SAD9J-D01. Call factory for additional codes. -443: Polarized Pin installed in contact position noted by dash number. See "Polarization" under next tab. -444: Contact position noted by dash number is left open (to mate with -443). See "Polarization" under next tab. -B82: Termination face sealed against conformal coating. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) -D54: Combine B82 and D01 special codes. -G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate. "W" Series Connectors W-10 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0005 The Interconnect Solution Source .250 .100 .100 .150 .250 .247 .130 2-56 NC THD .187 DIA .100 TYP .027.001 DIA 2-56 NC THD .035 INSIDE DIA SOLDER CUP .030. 001 DIA .050 TYP .100 #2 FLATWASHER #2 LOCKWASHER .140-PD9 OR .172-PD11 .100 .150 .500 .130 .335 .335 .075 EXAMPLE: WTA26SACJT EXAMPLE: WTA26PD9JL .250 .100 .100 .075 .100 .130 .250 .130 2-S6 NC THD .100 TYP .001 .027 DIA .030.001 DIA .187 DIA #2 FLAT WASHER #2 LOCKWASHER .035 INSIDE DIA SOLDER CUP .050 TYP .100 .100 2-S NC TH'D .500 .150 .150 .335 .140-PD9 OR .172-PD11 .075 .100 .075 EXAMPLE: WTA26PCJT EXAMPLE: WTA26SAD9JL WTA-WTA Dimensions SIZE 10 14 20 24 26 30 36 40 44 50 54 56 60 66 70 0018 A .850 1.050 1.350 1.550 1.650 1.850 2.150 2.350 2.550 2.850 3.050 3.150 3.350 3.650 3.850 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com B .650 .850 1.150 1.350 1.450 1.650 1.950 2.150 2.350 2.650 2.850 2.950 3.150 3.450 3.650 C .400 .600 .900 1.100 1.200 1.400 1.700 1.900 2.100 2.400 2.600 2.700 2.900 3.200 3.400 "W" Series Connectors W-11 The Interconnect Solution Source 2 WTAV26PD9SYL * ROW Connectors Sandwich Boards WTAV-WTAX Examples: WTAX26SAD9SYL PLUG: RECEPTACLE: PLUG WTAV 26 PD9 SYL WTAX 26 SAD9 SYL RECEPTACLE SERIES WTAV 2-row, straight, plug, w/o mounting ears WTAX WTAX 2-row, straight, receptacle, w/o mounting ears 2-row, right-angle, receptacle, w/o mounting ears NUMBER OF CONTACTS 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 TYPE OF CONTACTS * Pin or socket contacts can be used in either plug or receptacle. * When pin contacts are use, standard hardware orientation places the female hardware next to the #1 pin contact. * When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket. PC PD7 PD9 PD11 PF3 PF6 PF8 PW34 PW40 = Pin, straight, solder cup = Pin, straight, dip solder, .109 = Pin, straight, dip solder, .140 = Pin, straight, dip solder, .172 = Pin, straight, flex-circuit, .050 = Pin, straight, flex-circuit, .093 = Pin, straight, flex-circuit, .125 = Pin, straight, wire wrap, .531 = Pin, straight, wire wrap, .625 SAC SAD7 SAD9 SAD11 SAF3 SAF6 SAF9 SAP SAW24 SAW40 SOR7 SOR9 SOR11 = Socket, straight, solder cup = Socket, straight, dip solder, .109 = Socket, straight, dip solder, .140 = Socket, straight, dip solder, .172 = Socket, straight, flex-circuit, .050 = Socket, straight, flex-circuit, .093 = Socket, straight, flex-circuit, .140 = Socket, straight, pin termination, .150 = Socket, straight, wire wrap, .375 = Socket, straight, wire wrap, .625 = Socket, right-angle, dip solder, .109 = Socket, right-angle, dip solder, .140 = Socket, right-angle, dip solder, .172 TYPE OF HARDWARE * Jackset hardware determines image of connector. Must specify image with Guide Set Hardware. * Plug facial seal gaskets and hoods; order separately or add "Q" in part number. Example: WTAV10PD9QJ. See "Gaskets" and "Hoods" under next tab for instructions. SY = Guide Set SY = Guide Set SY-# = Guide Set, polarized SY-# = Guide Set, polarized SYL = Guide Set, long SYL = Guide Set, long J = Fixed jackset JT = Turning jackset, .500 JL = Fixed jackset, long JTA = Turning jackset, .200 JTB = Hex turning jackset, .200 JTC = Turning jackset, .500 JTL = Long turning jackset, .700 OPTIONS * OPTION CODES: Add to the end of the part number. Example: WTAV10SAD9J-D01. Call factory for additional codes. -443: Polarized Pin installed in contact position noted by dash number. See "Polarization" under next tab. -444: Contact position noted by dash number is left open (to mate with -443). See "Polarization" under next tab. -B82: Termination face sealed against conformal coating. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) -D54: Combine B82 and D01 special codes. -G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate. "W" Series Connectors W-12 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0005 The Interconnect Solution Source .250 .250 .100 .140 .130 .247 .130 256NC THD 2-56 NC THD .100 TYP .030+.001 DIA .001 0.027 DIA .001 0.027 DIA C .050 TYP .100 .100 .150 #2 FLAT WASHER #2 LOCKWASHER .140 SAD9 OR .172 SAD11 #2 FLAT WASHER #2 LOCKWASHER .335 .150 .335 .075 .075 .100 PLUG IMAGE EXAMPLE: WTAV26PD9SYL RECEPTACLE IMAGE EXAMPLE: WTAX26SAD9SYL WTAV-WTAX Dimensions SIZE 10 14 20 24 26 30 36 40 44 50 54 56 60 66 70 0018 A .850 1.050 1.350 1.550 1.650 1.850 2.150 2.350 2.550 2.850 3.050 3.150 3.350 3.650 3.850 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com B .650 .850 1.150 1.350 1.450 1.650 1.950 2.150 2.350 2.650 2.850 2.950 3.150 3.450 3.650 C .400 .600 .900 1.100 1.200 1.400 1.700 1.900 2.100 2.400 2.600 2.700 2.900 3.200 3.400 "W" Series Connectors 9916 W-13 The Interconnect Solution Source 2 * ROW Connectors WTB26PR9SY PC Card to Chassis or Board WTB-WTB WTB26SAD11SY Examples: PLUG: RECEPTACLE: PLUG WTB 26 WTB 26 RECEPTACLE SERIES WTB = 2-row, right-angle, plug, w/ mounting ears WTB WTB = 2-row, straight, receptacle, w/ mounting ears = 2-row, right-angle, receptacle, w/ mounting ears NUMBER OF CONTACTS 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 TYPE OF CONTACTS * The contact type determines image of connector, Pin right-angle contacts are always plug image, all other contacts, straight pin or sockets are receptacle image. See page W-18 to switch image. PR7 PR9 PR11 PR13 PR15 PR23 PR30 PRC PRW33 PRW40 = Pin, right-angle, dip solder, .109 = Pin, right-angle, dip solder, .140 = Pin, right-angle, dip solder, .172 = Pin, right-angle, dip solder, .203 = Pin, right-angle, dip solder, .234 = Pin, right-angle, dip solder, .359 = Pin, right-angle, dip solder, .470 = Pin, right-angle, solder cup = Pin, right-angle, wire wrap, .515 = Pin, right-angle, wire wrap, .625 SAC SAD7 SAD9 SAD11 SAF3 SAF6 SAF9 SAW24 SAW40 SOR7 SOR9 SOR11 = Socket, straight, solder cup = Socket, straight, dip solder, .109 = Socket, straight, dip solder, .140 = Socket, straight, dip solder, .172 = Socket, straight, flex-circuit, .050 = Socket, straight, flex-circuit, .093 = Socket, straight, flex-circuit, .140 = Socket, straight, wire wrap, .375 = Socket, straight, wire wrap, .625 = Socket, right-angle, dip solder, .109, see W-17. = Socket, right-angle, dip solder, .140, see W-17. = Socket, right-angle, dip solder, .172, see W-17. TYPE OF HARDWARE * Plug facial seal gaskets; order separately or add "Q" in part number. Example: WTB10PR9QJ. See "Gaskets" under next tab for instructions. SY = Guide Set SY = Guide Set SY-# = Guide Set, polarized SY-# = Guide Set, polarized SYL = Guide Set, long SYL = Guide Set, long JT = Turning jackset, .500 J = Fixed jackset JTA = Turning jackset, .200 JL = Fixed jackset, long JTB = Hex turning jackset, .200 JTC = Turning jackset, .500 JTL = Long turning jackset, .700 OPTIONS * OPTION CODES: Add to the end of the part number. Example: WTB10PCSY342. Call factory for additional codes. -342: Remove .250-long mounting ears. -443: Polarized Pin installed in contact position noted by dash number. -515: (Right-angle insulators only) Contact position noted by dash number is left open (to mate with -443). -B82: Termination face sealed against conformal coating. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) -D54: Combine B82 and D01 special codes. -G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate. "W" Series Connectors W-14 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com PR9 SY SAD11 SY The Interconnect Solution Source .120 DIA THRU .190 HEX X .109 DEEP (USE SMALL PATTERN 4-40 NUT) .150 .400 .094 .186 .250 .100 .100 .250 .335 .094 .125 .120 DIA .125 .250 .350 .035 INSIDE DIA SOLDER CUP .325 .025.001 DIA .100 .030 .001 DIA .082 DIA .100 .050 .225 PR7-.109 OR PR9-.140 OR PR11-.172 .015 .150 .130 .051 .120 .130 .075 .100 .027.001 DIA MOTHER BOARD EXAMPLE: WTB26SAD9SY ALT END VIEW EXAMPLE: WTB26PR9SY .140-SAD9 OR .172-SAD11 .234-SAD15 EXAMPLE: WTB26SACSY WTB-WTB Dimensions SIZE 10 14 20 24 26 30 36 40 44 50 54 56 60 66 70 0018 A .850 1.050 1.350 1.550 1.650 1.850 2.150 2.350 2.550 2.850 3.050 3.150 3.350 3.650 3.850 B .650 .850 1.150 1.350 1.450 1.650 1.950 2.150 2.350 2.650 2.850 2.950 3.150 3.450 3.650 C .400 .600 .900 1.100 1.200 1.400 1.700 1.900 2.100 2.400 2.600 2.700 2.900 3.200 3.400 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com D 1.100 1.300 1.600 1.800 1.900 2.100 2.400 2.600 2.800 3.100 3.300 3.400 3.600 3.900 4.100 E 1.350 1.550 1.850 2.050 2.150 2.350 2.650 2.850 3.050 3.350 3.550 3.650 3.850 4.150 4.350 "W" Series Connectors 9916 W-15 The Interconnect Solution Source 3 * ROW Connectors WGV80PD9SY Sandwich Boards or to PC Card WGV-WGX WGX80SAD11SY Examples: RECEPTACLE: PLUG PLUG: WTBT WGV WGX 80 80 PD9 SY SAD11 SY RECEPTACLE SERIES WGV = 3-row, straight, plug, mounting ears WGX WGX = 3-row, straight, receptacle, mounting ears = 3-row, right-angle, receptacle, mounting ears NUMBER OF CONTACTS 50, 62, 80, 92, 104 50, 62, 80, 92, 104 TYPE OF CONTACTS * Pin or socket contacts can be used in either receptacle. * When pin contacts are used, standard hardware orientation places the female hardware next to the #1 position. * When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket position. PC = Pin, straight, solder cup SAC = Socket, straight, solder cup PD7 = Pin, straight, dip solder, .109 SAD7 = Socket, straight, dip solder, .109 PD9 = Pin, straight, dip solder, .140 SAD9 = Socket, straight, dip solder, .140 PD11 = Pin, straight, dip solder, .172 SAD11 = Socket, straight, dip solder, .172 PD13 = Pin, straight, dip solder, .203 SAF3 = Socket, straight, flex-circuit, .050 PF3 = Pin, straight, flex-circuit, .050 SAF6 = Socket, straight, flex-circuit, .093 PF6 = Pin, straight, flex-circuit, .093 SAF9 = Socket, straight, flex-circuit, .140 PF8 = Pin, straight, flex-circuit, .125 SAP = Socket, straight, pin termination, .150, connector saver PW34 = Pin, straight, wire wrap, .531 SAW24 = Socket, straight, wire wrap, .375 PW40 = Pin, straight, wire wrap, .625 SAW40 = Socket, straight, wire wrap, .625 SOR7 = Socket, right-angle, dip solder, .109, see page W-39. SOR9 = Socket, right-angle, dip solder, .140, see page W-39. SOR11 = Socket, right-angle, dip solder, .172, see page W-39. TYPE OF HARDWARE * Plug facial seal gaskets and hoods; order separately or add "Q" in part number. Example: WTA10PD9QJ. See "Gaskets" and "Hoods" under next tab for instructions. SY = Guide Set SY = Guide Set SY-# = Guide Set, polarized SY-# = Guide Set, polarized SYL = Guide Set, long SYL = Guide Set, long JT = Turning jackset, .500 J = Fixed jackset JTA = Turning jackset, .200 JL = Fixed jackset, long JTB = Hex turning jackset, .200 JTC = Turning jackset, .500 JTL = Long turning jackset, .700 OPTIONS * OPTION CODES: Add to the end of the part number. Example: WGV80PD9SY342. Call factory for additional codes. -342: Remove .250 mounting ears. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) -G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate. "W" Series Connectors W-40 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0018 The Interconnect Solution Source WGV-WGX Dimensions SIZE 0005 A B C D E F BASIC BASIC .010 REF BASIC BASIC 50 1.800 2.250 2.500 2.000 1.600 1.500 62 2.200 2.650 2.900 2.400 2.00 1.900 80 2.800 3.250 3.500 3.000 2.600 2.500 92 3.200 3.650 3.900 3.400 3.000 2.900 104 3.600 4.050 4.300 3.800 3.400 3.300 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors W-41 The Interconnect Solution Source 4 WRF100PCJTL * ROW Connectors Cable to Board or Panel WRF-WRF WRF100SAD11JL Examples: PLUG: RECEPTACLE: PLUG WRF WRF 100 100 RECEPTACLE SERIES WRF = 4-row, straight, plug, w/o mounting ears WRF = 4-row, straight, receptacle NUMBER OF CONTACTS 100 100 TYPE OF CONTACTS * Contact Identification: Looking at the mating face of the connector, each contact has a double indicator designation, including a row letter plus a position number. Rows A and C contain odd numbers 1 thru 49: rows B and D contain even numbers 2 thru 50. PC PD11 PF6 = Pin, straight, solder cup = Pin, straight, dip solder, .172 = Pin, straight, flex-circuit, .093 JTB JTL = Hex turning jackset, .200 = Long turning jackset SAC SAD9 SAD11 SAP = Socket, straight, solder cup = Socket, straight, dip solder, .140 = Socket, straight, dip solder, .172 = Socket, straight, pin termination, .150, connector saver TYPE OF HARDWARE JL = Fixed jackset, long OPTIONS * OPTION CODES: Add to the end of the part number. Example: WRF100SAD11JL-D54. Call factory for additional codes. -B82: Termination face sealed against conformal coating. -D54: Combine -B82 and -D01 special codes. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) "W" Series Connectors W-54 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com PC JTL SAD11 JL The Interconnect Solution Source WRF-WRF Dimensions A 3.375 B 3.100 C 2.500 D 1.200 E 1.100 F 2.750 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors 9916 W-55 The Interconnect Solution Source CONTACTS #22 PINS AND SOCKETS FOR WT, WTA, WTB, WTK, WG, WGA SERIES 0005 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors C-1 The Interconnect Solution Source CONTACTS CRIMP REMOVABLE for WTDX, WTDXA, WTK, WTKA Series CONTACTS COAX CONTACTS "W" Series Connectors C-2 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0005 The Interconnect Solution Source THE LF5 HELIXTM CONTACT These advantages are embodied in AirBorn's new LHF HelixTM line of contacts and connectors. The precise wire locations, controlled by a notched housing, minimize force variations; the resulting stability confers some unique performance advantages on the LHF HelixTM connector. These are documented on the next page. Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors 9916 C-3 The Interconnect Solution Source "W" Series Connectors C-4 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com The Interconnect Solution Source REFERENCE CHART CONTACTS AND HARDWARE Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors 9916 C-5 The Interconnect Solution Source HARDWARE JACKSETS "W" Series Connectors H-1 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com The Interconnect Solution Source HARDWARE GUIDE SETS NOTE: UNDER NORMAL CONDITIONS, JACKSCREWS OR GUIDE PIN IS AT SOCKET CONTACT POTISION #1, AND JACKSOCKET OR GUIDE SOCKET IS AT PIN CONTACT POSITION #1. Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors 9916 H-2 The Interconnect Solution Source Hardware Availability By Connector Series Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors 9916 H-3 The Interconnect Solution Source Hardware Availability By Connector Series (Cont'd.) "W" Series Connectors H-4 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com The Interconnect Solution Source Polarization D-SHAPED GUIDE SETS Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors 9916 P-1 The Interconnect Solution Source Polarization POLARIZING PIN APPLICATION "W" Series Connectors P-2 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com The Interconnect Solution Source MILITARY CROSS REFERENCE CHART MIL-C-55302/55 thru MIL-C-55302/66, MIL-C-55302/138 and /139 ## Indicates Number of Contacts ## Indicates Number of Contacts 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 MIL-C-55302/55 - Standard Insertion Force Contacts or MIL-C-55302/55L - Low Insertion Force Contacts MIL Number W Series /55-A##L WTA##SACJTL /55-A##M WTA##SACJT /55-A##S WTA##SACJTA /55-A##H WTA##SACJTB /55-B##L /55-B##M /55-B##S /55-B##H WTA##SAD9JTL WTA##SAD9JT WTA##SAD9JTA WTA##SAD9JTB /55-C##L /55-C##M /55-C##S /55-C##H WTA##SAD11JTL WTA##SAD11JT WTA##SAD11JTA WTA##SAD11JTB /55-D##L /55-D##M /55-D##S /55-D##H WTA##SAF3JTL WTA##SAF3JT WTA##SAF3JTA WTA##SAF3JTB /55-E##L /55-E##M /55-E##S /55-E##H WTA##SAD15JTL WTA##SAD15JT WTA##SAD15JTA WTA##SAD15JTB /55-F##L /55-F##M /55-F##S /55-F##H WTA##SAF6JTL WTA##SAF6JT WTA##SAF6JTA WTA##SAF6JTB MIL-C-55302/56 /56-A## /56-B## /56-C## /56-D## /56-E## /56-F## WTA##PCJL WTA##PD9JL WTA##PD11JL WTA##PW40JL WTA##PF3JL WTA##PF6JL 0025 MIL-C-55302/57 MIL Number /57-A##X /57-A##Y /57-A##Y-2 thru -64 /57-A##Y-0 /57-A##S /57-A##H W Series WTB##PR7SY WTB##PR7SY-1 WTB##PR7SY-2 thru -64 WTB##PR7SY-0 WTB##PR7JTA WTB##PR7JTB /57-B##X /57-B##Y /57-B##Y-2 thru -64 /57-B##Y-0 /57-B##S /57-B##H WTB##PR9SY WTB##PR9SY-1 WTB##PR9SY-2 thru -64 WTB##PR9SY-0 WTB##PR9JTA WTB##PR9JTB /57-C##X /57-C##Y /57-C##Y-2 thru -64 /57-C##Y-0 /57-C##S /57-C##H WTB##PR11SY WTB##PR11SY-1 WTB##PR11SY-2 thru -64 WTB##PR11SY-0 WTB##PR11JTA WTB##PR11JTB /57-01 TN1650 Spanner Nut Wrench Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors X-1 The Interconnect Solution Source MILITARY CROSS REFERENCE CHART (CONT'D.) MIL-C 55302/58 - Standard insertion force contacts or MIL-C-55302/58L - Low insertion force contacts Mil No. W series /58-A##X WTB##SACSY /58-A##Y WTB##SACSY-1 /58-A##Y-2 thru -64 WTB##SACSY-2 thru -64 /58-A##Y-0 WTB##SACSY-0 /58-A##F WTB##SACJ /58-A##S WTB##SACJTA /58-A##H WTB##SACJTB MIL-C-55302/58 Mil No. /58-H##X /58-H##Y /58-H##Y-2 thru -64 /58-H##Y-0 /58-H##F /58-H##S /58-H##H /58-B##X /58-B##Y /58-B##Y-2 thru -64 /58-B##Y-0 /58-B##F /58-B##S /58-B##H WTB##SAD9SY WTB##SAD9SY-1 WTB##SAD9SY-2 thru -64 WTB##SAD9SY-0 WTB##SAD9J WTB##SAD9JTA WTB##SAD9JTB /59 ### Indicates No. of contacts: 90,100 AND 120 /59-A###X WTB###PR7SY /59-A###Y WTB###PR7SY-1 /59-A###Y-2 thru -64 WTB###PR7SY-2 thru -64 /59-A###Y-0 WTB###PR7SY-0 /59-A###F WTB###PR7J /59-A###S WTB###PR7JTA /59-A###H WTB###PR7JTB /58-C##X /58-C##Y /58-C##Y-2 thru -64 /58-C##Y-0 /58-C##F /58-C##S /58-C##H WTB##SAD11SY WTB##SAD11SY-1 WTB##SAD11SY-2 thru -64 WTB##SAD11SY-0 WTB##SAD11J WTB##SAD11JTA WTB##SAD11JTB /58-D##X /58-D##Y /58-D##Y-2 thru -64 /58-D##Y-0 /58-D##F /58-D##S /58-D##H WTB##SAW40SY WTB##SAW40SY-1 WTB##SAW40SY-2 thru -64 WTB##SAW40SY-0 WTB##SAW40J WTB##SAW40JTA WTB##SAW40JTB /58-E##X /58-E##Y /58-E##Y-2 thru -64 /58-E##Y-0 /58-E##F /58-E##S /58-E##H /58-F##X /58-F##Y /58-F##Y-2 thru -64 /58-F##Y-0 /58-F##F /58-F##S /58-F##H "W" Series Connectors X-2 W series WTB##SAF6SY WTB##SAF6SY-1 WTB##SAF6SY-2 thru -64 WTB##SAF6SY-0 WTB##SAF6J WTB##SAF6JTA WTB##SAF6JTB /59-B###X /59-B###Y /59-B###Y-2 thru -64 /59-B###Y-0 /59-B###F /59-B###S /59-B###H WTB###PR9SY WTB###PR9SY-1 WTB###PR9SY-2 thru -64 WTB###PR9SY-0 WTB###PR9J WTB###PR9JTA WTB###PR9JTB /59-C###X /59-C###Y /59-C###Y-2 thru -64 /59-C###Y-0 /59-C###F /59-C###S /59-C###H WTB###PR11SY WTB###PR11SY-1 WTB###PR11SY-2 thru -64 WTB###PR11SY-0 WTB###PR11J WTB###PR11JTA WTB###PR11JTB WTB##SAF3SY WTB##SAF3SY-1 WTB##SAF3SY-2 thru -64 WTB##SAF3SY-0 WTB##SAF3J WTB##SAF3JTA WTB##SAF3JTB WTB##SAD15SY WTB##SAD15SY-1 WTB##SAD15SY-2 thru -64 WTB##SAD15SY-0 WTB##SAD15J WTB##SAD15JTA WTB##SAD15JTB Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0025 The Interconnect Solution Source MILITARY CROSS REFERENCE CHART (CONT'D.) ### Indicates No. of Contacts ## Indicates No. of Contacts 90, 100, and 120 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 MIL-C 55302/60-Standard Inserion Force Contacts or MIL-C 55302/60L Low Insertion Force Contacts MIL No. W Series /60-A###X WTB###SACSY /60-A###Y WTB###SACSY-1 /60-A###Y-2 thru -64 WTB###SACSY-2 thru -64 /60-A###Y-0 WTB###SACSY-0 /60-A###F WTB###SACJ /60-A###S WTB###SACJTA /60-A###H WTB###SACJTB /60-B###X /60-B###Y /60-B###Y-2 thru -64 /60-B###Y-0 /60-B###F /60-B###S /60-B###H WTB###SAD9SY WTB###SAD9SY-1 WTB###SAD9SY-2 thru -64 WTB###SAD9SY-0 WTB###SAD9J WTB###SAD9JTA WTB###SAD9JTB /60-C###X /60-C###Y /60-C###Y-2 thru -64 /60-C###Y-0 /60-C###F /60-C###S /60-C###H WTB###SAD11SY WTB###SAD11SY-1 WTB###SAD11SY-2 thru -64 WTB###SAD11SY-0 WTB###SAD11J WTB###SAD11JTA WTB###SAD11JTB /60-D###X /60-D###Y /60-D###Y-2 thru -64 /60-D###Y-0 /60-D###F /60-D###S /60-D###H WTB###SAW40SY WTB###SAW40SY-1 WTB###SAW40SY-2 thru -64 WTB###SAW40SY-0 WTB###SAW40J WTB###SAW40JTA WTB###SAW40JTB /60-E###X /60-E###Y /60-E###Y-2 thru -64 /60-E###Y- 0 /60-E###F /60-E###S /60-E###H WTB###SAD15SY WTB###SAD15SY-1 WTB###SAD15SY-2 thru -64 WTB###SAD15SY-0 WTB###SAD15J WTB###SAD15JTA WTB###SAD15JTB MIL-C-55302/61 ## Indicates No. of Contacts 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 60, 70 /61-A## WTB##PR7J /61-B## WTB##PR9J /61-C## WTB##PR11J 0025 MIL-C-55302/62- Standard Insertion Force Contacts or MIL-C-55302/62L Low Insertion Force Contacts MIL No. W Series /62-A##L WTAX##SACJTL /62-A##M WTAX##SACJT /62-A##S WTAX##SACJTA /62-A##H WTAX##SACJTB /62-B##L /62-B##M /62-B##S /62-B##H WTAX##SAD9JTL WTAX##SAD9JTL WTAX##SAD9JTA WTAX##SAD9JTB /62-C##L /62-C##M /62-C##S /62-C##H WTAX##SAD11JTL WTAX##SAD11JT WTAX##SAD11JTA WTAX##SAD11JTB /62-D##L /62-D##M /62-D##S /62-D##H WTAX##SAF3JTL WTAX##SAF3JT WTAX##SAF3JTA WTAX##SAF3JTB /62-E##L /62-E##M /62-E##S /62-E##H WTAX##SAD15JTL WTAX##SAD15JT WTAX##SAD15JTA WTAX##SAD15JTB /62-F##L /62-F##M /62-F##S /62-F##H WTAX##SAF6JTL WTAX##SAF6JT WTAX##SAF6JTA WTAX##SAF6JTB MIL-C-55302/63 /63-A##L /63-A##M /63-A##S /63-A##H WTA##PCJTL WTA##PCJT WTA##PCJTA WTA##PCJTB /63-A##F /63-A##X /63-A##Y /63-A##Y-2 thru -64 /63-A##Y-0 WTAV##PCJL WTAV##PCSYL WTAV##PCSYL-1 WTAV##PCSYL-2 thru -64 WTAV##PCSYL-0 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors X-3 The Interconnect Solution Source MILITARY CROSS REFERENCE CHART (CONT'D.) ## Indicates No. of Contacts ## Indicates No. of Contacts 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 MIL-C-55302-64- Standard Insertion Force Contacts or MIL-C-55302/63 MIL NO. /63-B##L /63-B##M /63-B##S /63-B##H /63-B##F W SERIES WTA##PD9JTL WTA##PD9JT WTA##PD9JTA WTA##PD9JTB WTAV##PD9JL /63-B##X /63-B##Y /63-B##Y-2 thru -64 /63-B##Y-0 WTAV##PD9SYL WTAV##PD9SYL-1 WTAV##PD9SYL-2 thru -64 WTAV##PD9SYL-0 /63-C##L /63-C##M /63-C##S /63-C##H /63-C##F WTA##PD11JTL WTA##PD11JT WTA##PD11JTA WTA##PD11JTB WTAV##PD11JL /63-C##X /63-C##Y /63-C##Y-2 thru -64 /63-C##Y-0 WTAV##PD11SYL WTAV##PD11SYL-1 WTAV##PD11SYL-2 thru -64 WTAV##PD11SYL-0 /63-D##L /63-D##M /63-D##S /63-D##H /63-D##F WTA##PF3JTL WTA##PF3JT WTA##PF3JTA WTA##PF3JTB WTAV##PF3JL /63-D##X /63-D##Y /63-D##Y-2 thru -64 /63-D##Y-0 WTAV##PF3SYL WTAV##PF3SYL-1 WTAV##PF3SYL-2 thru -64 WTAV##PF3SYL-0 /63-E##L /63-E##M /63-E##S /63-E##H /63-E##F WTA##PF6JTL WTA##PF6JT WTA##PF6JTA WTA##PF6JTB WTAV##PF6JL /63-E##X /63-E##Y /63-E##Y-2 thru -64 /63-E##Y-0 WTAV##PF6SYL WTAV##PF6SYL-1 WTAV##PF6SYL-2 thru -64 WTAV##PF6SYL-0 "W" Series Connectors X-4 MIL-C-55302-64L Low Insertion Force Contacts MIL NO. W SERIES /64-A##F WTA##SACJL /64-A##X WTAX##SACSYL /64-A##Y WTAX##SACSYL-1 /64-A##Y-2 thru -64 WTAX##SACSYL-2 thru -64 /64-A##Y-0 WTAX##SACSYL-0 /64-B##F /64-B##X /64-B##Y /64-B##Y-2 thru -64 /64-B##Y-0 WTA##SAD9JL WTAX##SAD9SYL WTAX##SAD9SYL-1 WTAX##SAD9SYL-2 thru -64 WTAX##SAD9SYL-0 /64-C##F /64-C##X /64-C##Y /64-C##Y-2 thru -64 /64-C##Y-0 WTA##SAD11JL WTAX##SAD11SYL WTAX##SAD11SYL-1 WTAX##SAD11SYL-2 thru -64 WTAX##SAD11SYL-0 /64-D##F /64-D##X /64-D##Y /64-D##Y-2 thru -64 /64-D##Y-0 WTA##SAW40JL WTAX##SAW40SYL WTAX##SAW40SYL-1 WTAX##SAW40SYL-2 thru -64 WTAX##SAW40SYL-0 /64-E##F /64-E##X /64-E##Y /64-E##Y-2 thru -64 /64-E##Y-0 WTA##SAF3JL WTAX##SAF3SYL WTAX##SAF3SYL-1 WTAX##SAF3SYL-2 thru -64 WTAX##SAF3SYL-0 /64-F##F /64-F##X /64-F##Y /64-F##Y-2 thru -64 /64-F##Y-0 WTA##SAF6JL WTAX##SAF6SYL WTAX##SAF6SYL-1 WTAX##SAF6SYL-2 thru -64 WTAX##SAF6SYL-0 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0025 The Interconnect Solution Source MILITARY CROSS REFERENCE CHART 0025 ## Indicates No. of Contacts Number of Contacts 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 160 MIL-C 55302/65-AND /66- Standard Insertion Force Sockets MIL-C 55302-65L & /66L Low Insertion Force Sockets MIL-C-55302/139 MIL NO. /65L##X /65L##Y /65L##Y-2 thru -64 /65L##Y-0 /65L##F /65L##S /65L##H MIL NO. /139-B160X /139-B160Y /139-B160Y-2 thru -64 /139-B160Y-0 /139-B160F /139-B160S /139-B160H W SERIES WG160SAD7SY WG160SAD7SY-1 WG160SAD7SY-2 thru -64 WG160SAD7SY-0 WG160SAD7J WG160SAD7JTA WG160SAD7JTB W SERIES WTKA##SASY WTKA##SASY-1 WTKA##SASY-2 thru -64 WTKA##SASY-0 WTKA##SAJ WTKA##SAJTA WTKA##SAJTB /65-01 Crimp Contact /65-02 Crimp Contact /66L##L /66L##M /66L##S /66L##F /66L##H MIL-C-55302/138 /138-A160X /138-A160Y /138-A160Y-2 thru -64 /138-A160Y-0 /138-A160F /138-A160S /138-A160H WTK2222S WTK2222SA Low Force Socket WTDXA##SAJTL WTDXA##SAJT WTDXA##SAJTA WTDXA##SAJ WTDXA##SAJTB Number of Contacts: 160 WG160PR7SY WG160PR7SY-1 WG160PR7SY-2 thru -64 WG160PR7SY-0 WG160PR7J WG160PR7JTA WG160PR7JTB /139-C160X /139-C160Y /139-C160Y-2 thru -64 /139-C160Y-0 /139-C160F /139-C160S /139-C160H WG160SAD9SY WG160SAD9SY-1 WG160SAD9SY-2 thru -64 WG160SAD9SY-0 WG160SAD9J WG160SAD9JTA WG160SAD9JTB /139-D160X /139-D160Y /139-D160Y-2 thru -64 /139-D160Y-0 /139-D160F /139-D160S /139-D160H WG160SAW40SY WG160SAW40SY-1 WG160SAW40SY-2 thru -64 WG160SAW40SY-0 WG160SAW40J WG160SAW40JTA WG160SAW40JTB /138-B160X /138-B160Y /138-B160Y-2 thru -64 /138-B160Y-0 /138-B160F /138-B160S /138-B160H WG160PR9SY WG160PR9SY-1 WG160PR9SY-2 thru -64 WG160PR9SY-0 WG160PR9J WG160PR9JTA WG160PR9JTB /139-E160X /139-E160Y /139-E160Y-2 thru -64 /139-E160Y-0 /139-E160F /139-E160S /139-E160H WG160SAD11SY WG160SAD11SY-1 WG160SAD11SY-2 thru -64 WG160SAD11SY-0 WG160SAD11J WG160SAD11JTA WG160SAD11JTB /138-C160X /138-C160Y /138-C160Y-2 thru -64 /138-C160Y-0 /138-C160F /138-C160S /138-C160H WG160PR11SY WG160PR11SY-1 WG160PR11SY-2 thru -64 WG160PR11SY-0 WG160PR11J WG160PR11JTA WG160PR11JTB /139-F160X /139-F160Y /139-F160Y-2 thru -64 /139-F160Y-0 /139-F160F /139-F160S /139-F160H WG160SAF3SY WG160SAF3SY-1 WG160SAF3SY-2 thru -64 WG160SAF3SY-0 WG160SAF3J WG160SAF3JTA WG160SAF3JTB MIL-C-55302/139 /139-A160X /139-A160Y /139-A160Y-2 thru -64 /139-A160Y-0 /139-A160F /139-A160S /139-A160H WG160SACSY WG160SACSY-1 WG160SACSY-2 thru -64 WG160SACSY-0 WG160SACJ WG160SACJTA WG160SACJTB /139-H160X /139-H160Y /139-H160Y-2 thru -64 /139-H160Y-0 /139-H160F /139-H160S /139-H160H WG160SAF6SY WG160SAF6SY-1 WG160SAF6SY-2 thru -64 WG160SAF6SY-0 WG160SAF6J WG160SAF6JTA WG160SAF6JTB Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors X-5 The Interconnect Solution Source 2 * ROW Connectors Sandwich Boards WTBV-WTB Examples: PLUG: RECEPTACLE: PLUG WTBV 90 WTB 90 PD9 SY SAD11 SY RECEPTACLE SERIES WTBV = 2-row, straight-plug, mounting ears WTB WTB = 2-row, straight, receptacle, mounting ears = 2-row, right-angle, receptacle, mounting ears NUMBER OF CONTACTS 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 TYPE OF CONTACTS * Pin or socket contacts can be used in either plug or receptacle. * When pin contacts are used, standard hardware orientation places the female hardware next to the #1 position. * When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket position. PC PD7 PD9 PD11 PD13 PF3 PF6 PF8 PW34 PW40 = Pin, straight, solder cup = Pin, straight, dip solder, .109 = Pin, straight, dip solder, .140 = Pin, straight, dip solder, .172 = Pin, straight, dip solder, .203 = Pin, straight, flex-circuit, .050 = Pin, straight, flex-circuit, .093 = Pin, straight, flex-circuit, .125 = Pin, straight, wire wrap, .531 = Pin, straight, wire wrap, .625 SAC SAD7 SAD9 SAD11 SAF3 SAF6 SAF9 SAP SAW24 SAW40 SOR7 SOR9 SOR11 = Socket, straight, solder cup = Socket, straight, dip solder, .109 = Socket, straight, dip solder, .140 = Socket, straight, dip solder, .172 = Socket, straight, flex-circuit, .050 = Socket, straight, flex-circuit, .093 = Socket, straight, flex-circuit, .140 = Socket, straight, pin termination, .150, connector saver = Socket, straight, wire wrap, .375 = Socket, straight, wire wrap, .625 = Socket, right-angle, dip solder, .109, see W-17. = Socket, right-angle, dip solder, .140, see W-17. = Socket, right-angle, dip solder, .172, see W-17. TYPE OF HARDWARE * Plug facial seal gaskets and hoods; order separately or add "Q" in part number. Example: WTBV10PD9QJ. See "Gaskets" and "Hoods" under next tab for instructions. SY = Guide Set SY = Guide Set SY-# = Guide Set, polarized SY-# = Guide Set, polarized SYL = Guide Set, long SYL = Guide Set, long JT = Turning jackset, .500 J = Fixed jackset JTA = Turning jackset, .200 JL = Fixed jackset, long JTB = Hex turning jackset, .200 JTC = Turning jackset, .500 JTL = Long turning jackset, .700 OPTIONS * OPTION CODES: Add to the end of the part number. Example: WTBV10PCSY342. Call factory for additional codes. -B82: Termination face sealed against conformal coating. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) -D54: Combine B82 and D01 special codes. -G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate. "W" Series Connectors W-18 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0005 The Interconnect Solution Source .150 .100 .250 .125 TYP .335 PD 9-.140 PD 11-.172 .140-SED 9 OR .172-SED 11 OR .234-SED 15 .250 .094 .094 .125 .250 .027+.001 DIA .100 TYP .250 .125 .335 .027+.001 DIA .100 .030+.001 DIA E D C C A B A C B D C .082 DIA .050 TYP .100 .100 .050 TYP .120 DIA THRU 2 PLCS .225 .150 .150 .130 .120 DIA THRU 2 PLCS .100 .130 .225 .075 .075 .075 .100 .075 .100 PLUG IMAGE EXAMPLE: WTBV26PD9SY RECEPTACLE IMAGE EXAMPLE: WTB26SAD9SY WTBV-WTB Dimensions SIZE 10 14 20 24 26 30 36 40 44 50 54 56 60 66 70 0018 A .850 1.050 1.350 1.550 1.650 1.850 2.150 2.350 2.550 2.850 3.050 3.150 3.350 3.650 3.850 B .650 .850 1.150 1.350 1.450 1.650 1.950 2.150 2.350 2.650 2.850 2.950 3.150 3.450 3.650 C .400 .600 .900 1.100 1.200 1.400 1.700 1.900 2.100 2.400 2.600 2.700 2.900 3.200 3.400 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com D 1.100 1.300 1.600 1.800 1.900 2.100 2.400 2.600 2.800 3.100 3.300 3.400 3.600 3.900 4.100 E 1.350 1.550 1.850 2.050 2.150 2.350 2.650 2.850 3.050 3.350 3.550 3.650 3.850 4.150 4.350 "W" Series Connectors W-19 E