www.vishay.com
P R O D U C T S H E E T
R E S I S T I V E P R O D U C T S
THICK FILM RESISTOR/CAPACITOR
ARRAY
CRCA12E, CRCA12S
Surface-Mount Thick Film
Resistor/Capacitor Array
KEY BENEFITS
• Single component reduces board space and component count
• Processing speed and space reduction superior to individual components
• Provides a circuit solution within limited real estate constraints
APPLICATIONS
• Computer boards
• High-speed processing applications
Datasheet is available on our web site at www.vishay.com
for CRCA12E, CRCA12S - http://www.vishay.com/doc?31044
VMN-PT9144-0605
CRCA
Vishay Dale
Thick Film Array, Resistor/Capacitor
FEATURES
• Single component reduces board space and
component counts
• Choice of dielectric characteristics X7R or Y5U
• Wrap around termination
• Thick film R/C element
• Inner electrode protection
• Flow & Reflow solderable
• Automatic placement capability, standard size
• 8 or 10 pin configurations
• Lead (Pb)-Free version is RoHS Compliant
•Ask about extended value ranges •Packaging: according to EIA 481
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
GLOBAL RESISTOR CAPACITOR
MODEL POWER RATING TEMPERATURE TOLERANCE VALUE DIELECTRIC TEMPERATURE TOLERANCE VOLTAGE VALUE
P
70
°
C
COEFFICIENT RANGE COEFFICIENT RATING RANGE
W ppm/
°
C %
1
% % VDC pF
CRCA12E 0.125 200 5 10R – 1M0 X7R ± 15 20 50 10 - 270
CRCA12S
CRCA12E 0.125 200 5 10R – 1M0 Y5U + 20, - 56 20 50 270 -1800
CRCA12S
RESISTOR CAPACITOR
•Operating Temperature Range: - 55°C to + 125°C•Operating Temperature Range: X7R - 55°C to + 125°C
•Technology: Thick Film Y5U - 30°C to + 85°C
•Maximum Dissipation Factor: 2.5%
•Dielectric Withstanding Voltage: 125Vdc , 5 sec, 50mA Charge
STANDARD ELECTRICAL SPECIFICATIONS
MODEL PIN COUNT SCHEMATIC RESISTANCE CAPACITANCE PACKAGING SPECIAL
VALUE VALUE
CRCA12E 08 = 8 Pin 1 = 01 2 digit significant 2 digit significant E = Lead Free, T/R (2000pcs) (Dash Number)
CRCA12S 10 = 10 Pin 2 = 02 figure, followed by figure, followed by R = Tin/Lead, T/R (2000pcs) (up to 1 digit)
3 = 03 a multiplier a multiplier Blank = Stand ard
0 = Special 100 = 101100 = 10pF
683 = 68K1271 = 270pF
105 = 1.0M1182 = 1800pF
(Tolerance = ± 5%) (Tolerance = ± 20%)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRCA12E081472220R (preferred part numbering format)
Historical Part Number example: CRCA12E0801472J220MRB8 (will continue to be accepted)
CRCA12E 08 01 472 J 220 M RB8
C R C A 1 2 E 0 8 1 4 7 2 2 2 0 R
MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE CAPACITANCE TOLERANCE PACKAGING
VALUE VALUE
PARAMETER UNIT RESISTOR X7R CAPACITOR Y5U CAPACITOR
Rated Dissipation at 70°CW 0.125 – –
(CECC 40401 I EIA 575)
Capacitor Voltage Rating V – 50 50
Dielectric Withstanding V
dc
– 125 125
Voltage (5 sec, 50mA Charge)
Category Temperature Range
°C - 55 / + 155 - 55 / + 125 - 30 / + 85
Insulation Resistance 1> 10
10
TECHNICAL SPECIFICATIONS
Available
RoHS*
COMPLIANT
e3
* Pb containing terminations are not RoHS compliant, exemptions may apply
8-Terminal device S-Version E-Version
*For layouts to accept both the edge type and pull through type terminations add 0.25mm to the b-dimension and c = 1.7mm
SOLDER PAD DIMENSIONS [in millimeters]
WAVE SOLDERING REFLOW SOLDERING
c w d p a b* c w d p a b*
2.2 4.3 0.57 1.27 0.71 1.05 2.2 3.9 0.57 1.27 0.71 0.86
GLOBAL PIN SIZE DIMENSIONS [in millimeters]
MODEL NO#
INCH METRIC L W T B B* A A* DNOM PNOM
CRCA12E
8 2012 5032 5.1 ± 0.15 3.05 ± 0.15 0.61 ± 0.10 0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15 – 0.25 1.27
CRCA12S
8 2012 5032 5.1 ± 0.15 3.05 ± 0.15 0.61 ± 0.10 0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15 0.89 ± 0.15 0.25 1.27
CRCA12E
10 2512 6432 6.4 ± 0.15 3.05 ± 0.15 0.61 ± 0.10 0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15 – 0.25 1.27
CRCA12S
10 2512 6432 6.4 ± 0.15 3.05 ± 0.15 0.61 ± 0.10 0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15 0.89 ± 0.15 0.25 1.27
DIMENSIONS
see CRCC1206
PERFORMANCE:
01 Circuit CRCA12E & S 02 Circuit CRCA12E & S 03 Circuit CRCA12E & S
8 Pin 10 Pin
10 Pin only 10 Pin only
Revision 05-Oct-05
For technical questions, contact ff2aresistors@vishay.com
NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information
contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay’s terms and
conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling
these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.
